DEFENDER 85504 XXL – Two Connectors for 85500 Cable Protector 5-channel

Two Connectors for Defender XXL

   DEFENDER Laser engraving requirements [289,3 KB]

  DEKRA Certificate [3,70 MB]

  Users Manual - Defender Series [19,77 MB]

As it is the case with all crossovers of the DEFENDER series, the blue Defender cable crossover is oil, acid, and petrol resistant.

We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.

The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.

DEKRA certified - Certified product safety

1 Set is composed of:

• 6 Ramp pieces (3 Lines)
• 4 extremity pieces (2 left extremities / 2 right extremities)
• 1 blue pre-drilled Midi cable crossover

Please note:

• The Defender Wheelchair Ramp does not support vehicle traffic.

Defender Office GREY
Cable Duct 4-channel grey

 Data Sheet
Dekra Certificate
Technical Drawing
Defender Brochure
User's manual

• non-slip, ultra-flat cable protector made of recyclable polyurethane for indoors
• zigzag connector system, pre-drilled mounting holes, cutting guides for shortening
• 4 channels: 2 channels each 10 x 10 mm and 12 x 12 mm
• complies with German workplace accident prevention regulations (§ 3 A1 ArbStättV)
• fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
• resistant to oil, acids, solvents, and petrol
• dimensions 87 x 12 x 2 cm; Weight 1.24 kg
• reliable protection for cables and personnel
• available in black (Item No. 85160), grey (Item No. 85160GREY) and yellow (Item No. 85160YEL)
• curves and end ramps for flexible cable protection are available as accessories

Defender III cable crossover 45 degree curve

 Technical drawing - 85600 [209,5 KB]
  Technical Inspection Agency report [655,3 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB] 

The latest development in the Defender cable crossover series. This cable crossover
was developed in collaboration with suppliers for major events. The key feature of this
heavy-duty crossover is the two oversized cable/hose ducts for lines up to 120 mm,
and for fragile connections and connector housings not exceeding 100 mm.
Weight: approx. 25 kg to 27 kg
 

This cable crossover was developed in collaboration with suppliers for major events. The key feature of this heavy-duty crossover is the two oversized cable / hose ducts for lines up to 120 mm, and for fragile connections and connector housings not exceeding 100 mm.

• Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
• Lenght: 70 cm
• Width: 78.3 cm
• Height: 13.9 cm
• Channels: 2 + 2  
• Material: PU (Polyurethane)
• Degree of Hardness: 88 Shore ± 4 A
• Flame Class: B2 
• Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
• The Cable-Crossover is oil, acid & petrol resistant
• Operating Range: -30°C up to +60°C
• DEKRA certified - Certified product safety

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.

Defender XXL heavy duty cable and hose crossover Length: 75,00 cm Width: 70,00 cm
Height: 90 mm Channels: 5 Weight: 21,40 kg Material: PU (Polyurethane) Load bearing:
Approx 6 tons per typical tyre imprint (20x20 cm) The Cable-Crossover is oil, acid &
petrol resistant

 Technical drawing - 85500 [178,5 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB]

Together with the industry and leading rental companies we have developed our new flagship of the Defender series. 5 huge cable ducts, 3 of them are suitable for C-Tube hose as used by the fire brigade (Ø 62 mm). Power cables also have optimum protection. The load bearing actually surpasses the Defender III at more than 5 tons.

• Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
• Length: 70.00 cm (with connectors 75,00)
• Width: 69.60 cm
• Height: 8.7 cm
• Channels: 5
• Width (Channels): 6,1 cm, 6,2 cm, 6,0 cm, 6,2 cm, 6,1 cm
• Height (Channels): 5,9 cm, 6,5 cm, 6,3 cm, 6,5 cm, 5,9 cm
• Material: PU (Polyurethane)
• Degree of Hardness: 88 Shore ± 4 A
• Flame Class: B2)
• Operating Range: -30°C up to +60°C
• Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm) 
• The Cable-Crossover is oil, acid & petrol resistant 
• DEKRA certified - Certified product safety

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.