User’s manual Adam Hall 19″ Parts PCS 10 Power Conditioner Reliable protection against over-voltage and impulse voltage Effective high frequency filter against interference Central power supply with 8 switchable IEC sockets Unswitched convenience socket on the front Resettable circuit breaker on the front panel In addition to providing a central power supply to racks and […]
Reliable protection against over-voltage and impulse voltage
Effective high frequency filter against interference
Central power supply with 8 switchable IEC sockets
Unswitched convenience socket on the front
Resettable circuit breaker on the front panel
In addition to providing a central power supply to racks and installations, the 19″ AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.
All AH power conditioners are supplied with four IEC connection cables.
Product type
19 ” Rack power strips
Type
19″ / 1 U
Number of outlets (IEC C14)
9
Input voltage
230 V
Nominal Impedance
max 10 A
Protection Against Impulse Voltage
outer conductor to neutral
Response Time
1 ns
Max. Surge Current
6000A (8×20 µs pulse)
Max. Surge Energy
70 joules per contact
Noise Cancelling
<20 dB, 1.5 MHz-200 MHz
Mains connector
IEC mains cord
Fuse
10 A
Width
482 mm
Height
44.5 mm
Depth
190 mm
Weight
2,27 kg
Features
including 4 power cords
Weight
2.30 kg
Reviews
There are no reviews yet.
Be the first to review “Adam Hall 19″ Parts PCS 10 Power Conditioner” Cancel reply
Reliable protection against over-voltage and impulse voltage
Effective high frequency filter against interference
Central power supply with 8 switchable IEC sockets
Unswitched convenience socket on the front
Resettable circuit breaker on the front panel
In addition to providing a central power supply to racks and installations, the 19" AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.
All AH power conditioners are supplied with four IEC connection cables.
Product type
19 " Rack power strips
Type
19" / 1 U
Number of outlets (IEC C14)
9
Input voltage
230 V
Nominal Impedance
max 10 A
Protection Against Impulse Voltage
outer conductor to neutral
Response Time
1 ns
Max. Surge Current
6000A (8x20 µs pulse)
Max. Surge Energy
70 joules per contact
Noise Cancelling
<20 dB, 1.5 MHz-200 MHz
Mains connector
IEC mains cord
Fuse
10 A
Width
482 mm
Height
44.5 mm
Depth
190 mm
Weight
2,27 kg
Features
including 4 power cords
Designed for the most critical, ultra-low noise installations, the P-2300 IT E supplies up to 10 amps of balanced AC power ideal for recording studios, broadcast stations, video production facilities, or any environment requiring a pristine, studio-quality signal-to-noise ratio.
The P-2300 IT E features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Extreme Voltage Shutdown (EVS), and Linear Filtering Technology (LiFT) are combined to ensure what our customers have grown to expect from Furman — uncompromised protection and purification.
Symmetrically Balanced Power
Furmanʼs Symmetrically Balanced Power provides a virtually invisible noise floor by reworking incoming AC into a balanced power output. Similar to a balanced audio signal, balanced power splits a single voltage path into two separate voltage paths which are in opposite polarity, cancelling out noise and distortion on the incoming line. This noise reduction is extraordinarily efficient and linear across a huge frequency range, unveiling harmonics, overtones and low-level signals commonly masked by AC line noise.
Unmatched Protection
Furmanʼs SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained overvoltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.
Innovative Convenience and Monitoring Features
The P-2300 IT Eʼs front panel LED window displays incoming voltage or output current, with ”Protection OK”, ”Extreme Voltage” and color-coded ”Voltage Range” indicators for comprehensive power monitoring. A front panel USB outlet charges most personal media devices and cell phones right at your equipment rack. Universal IEC C-13 receptacles (12 rear panel, 2 front panel) and a removable power cord ensure compatibility with regional power requirements.
SPECIFICATIONS:
Maximum Current:
10 amps
Line Cord:
Detachable cord, 1mm² x 3, 2.5M long, Schuko plug to IEC C13
Operating Voltage:
180 to 244 VAC, 50 Hz
Over-Voltage Shutdown:
275 VAC Nominal
Spike Protection Mode:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
375 VAC peak @ 3,000 Amps
Response Time:
1 nanosecond
Maximum Surge Current:
6,500 Amps
Noise Attenuation:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions:
483mm W x 356mm D x 133mm H (19” W x 14” D x 5.25” H)
Weight:
43 kg. (95lbs.)
Power Consumption:
18 watts (for display and control circuits)
Receptacles:
Fourteen IEC C-13 (two front panel, twelve rear panel)
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
SPECIFICATIONS:
Maximum Output Current:
10 amps
Line Cord:
1.5 meter, removable, IEC C-13 female to Schuko male
Operating Voltage:
230VAC 50Hz
Spike Protection Mode:
Line to neutral
Energy Dissipation:
305 joules
Peak Impulse Current:
12,000 amps
Maximum Continuous Opterating Voltage:
650 Volts
Noise Attenuation:
Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
Dimensions:
1.75” H x 19” W x 7.5” D
Weight:
2.3 kg.
Safety Agency Listing:
CE
Warranty:
Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
Rack lighting panel with two gooseneck. Dimmer. 12 V. lamps. I
ncludes power supply.
Dimensions: (W x H x D) 482 x 43 x 43 mm.
Weight: 2,5 kgs.
Rated @ 250 V, 16 A
16 x 45° angled outlets
8 front and 8 rear outlets with individual on/off switches
Overload protection
The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
2 x 8
Power input
cables
Cable length
2 m
Cable connector
angled , Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium
Colour
Black
Width
485 mm
Height
44 mm
Depth
126 mm
Special feature
8 x Sockets back side , 8 x Sockets front side , Overload protection for front and rear side , Separate front and rear switches
Weight
1,7 kg
Adam Hall Cables 87471 C20
19" Power Strip 1U 8-way with C20 cold device socket
Power distributor with IEC C20 socket and detachable supply cable included
Max. current 16 A
8 45° rotated Schuko sockets
Illuminated mains switch
250 V operating voltage
Description
Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
8
Power input
cables
Cable length
2 m
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
3 x 1.5 mm² mm²
cable type
H05VV-F
Operating voltage
250 V
Max. current
16 A A
Cabinet material
Aluminium
Color
Black
Width
485 mm
Height
44 mm
Depth
44 mm
Other features
19" rack mains socket strips, Illuminated on / off switch
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.