Content |
Weatherproof sound projectors with injection-moulded body and coated steel grille. Suitable for indoor or outdoor music and speech applications. Fitted with 350mm four core input cable for different power ratings. The transformer may be bypassed internally to give an 8 Ohms, 25W load.
Adjustable steel mounting bracket
Weatherproof ABS enclosure
Housing material | ABS | Woofer | 165mmØ (6.5“) reinforced cone | Tweeter | Concentric 25mm (1“) mylar dome | IP rating | IPX5 | Frequency response | 100Hz - 17kHz | Power | 25W @ 8 ohms |
|
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)
|
The BS-678 is a double-cone type speaker with a wooden cabinet that has a stylish, compact and unobtrusive design and that delivers highly cost effective performance. A push-in type input connector allows easy cable connections and bridge wiring. The selectable input impedance can be easily adjusted by changing the tap position
of the unitʼs transformer. 6" (16cm) double cone speaker unit ensures high-quality sound, making the BS-678 ideal for BGM and announcement applications. It can be installed in either a horizontal or a vertical orientation. Its structure permits direct wall installation with screws, making the speaker unit resistant to falling even if outward force is applied to it.
• Stylish, compact and unobtrusive design
• Quick and easy installation
• High cost-effectiveness
• Horizontal / vertical installation
• Ideally suited for BGM and announcements
BS-678 | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ(1.5W),13kΩ (0.8W) 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ(0.8W),13kΩ (0.4W) | Sensitivity | (1W, 1m): 94dB (500 – 5,000Hz, pink noise) | Frequency Response: | 150 – 20,000Hz (peak –20dB) | Speaker Component: | 6" (16cm) double cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2(equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Finish: Baffle: | HIPS resin, off-white (RAL 9010 or equivalent colour) | Cabinet: | Particle board with pvc sheet, off-white(RAL 9010 or equivalent colour) | Grille: | Surface-treated steel plate net, off-white(RAL 9010 or equivalent colour) | Dimensions: | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“) | Weight: | 1.7kg (3.75 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) × 2 |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
SPECIFICATIONS |
| BS-633A | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W) | Sensitivity | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 780g (1.72 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2 |
|
BS-1030B and BS-1030W Music/Paging Speakers
The TOA BS-1030 Music/Paging Speaker has exceptional sound quality and value for a wide variety of applications. Available in black and white, the versatile BS-1030 is designed for both indoor and outdoor use with a durable ABS resin enclosure and steel mesh grille. The two-way, bass-reflex design features a 4.72" (12 cm) cone woofer, 1" (2.5 cm) dome tweeter and built-in multi-tap transformer with screwdriver-adjustable power taps. A transformer bypass setting allows direct 8-ohm operation. Installation is fast and easy with the supplied mounting bracket or rear panel keyholes for horizontal or vertical surface-mounting. The BS-1030 speakers are backed with a five year warranty.
Also see the new FB-100 and HB-1 Subwoofers.
FEATURES:
Indoor and Outdoor Applications Mounting Bracket Included Paintable Enclosure Two-Way, Bass-Reflex Design 70.7/100 V and 8-Ohm Screwdriver-Adjustable Tap Settings Black (BS-1030B) and White (BS-1030W) |
The latest addition to TOA's acclaimed speaker line, the new F-2000 F-1300and F-1000 Series of compact,
high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 and F-1000 Series are ideal solutions that solve increasing
needs for adaptable sound reinforcement.
• Finish in Black or White
• Weather proof version available (F-1000BTWP)
• Low impedance and 100V versions (F-1000BT)
• External rotary control for various impedance settings
• Multi position Bracket included
• Built in speaker protection
Various mounting brackets
enables a wide variety of installations, for example on walls, ceilings and speaker stands. Moreover, additional available brackets make even more demanding installations possible.
Specification | Model F-1000B | Enclosure Type | Bass-reflex type | Power Handling Capacity | 30W(continous pink noise)90W (continous program) | Impedance | 8Ohm | Sensitivity | 87dB (1w,1m) | Frequency Responce | 85-20,000Hz | Crossover Frequency | 5kHz | Directivity Angle | Horizontal 90°, vertical 90° | Speaker Componenrs | Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter | Input Terminals | Push-in terminal | Finish | HIPS, black | Dimensions | 130(W) × 202(H) × 131(D)mm | Weight | 1.8 kg (3.97 lb) (including the supplied brackets) | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set | Option | Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A |
|
Reviews
There are no reviews yet.