Content | Diafragm
This is the metal jacketed, titanium diaphragm version of the diaphragm which fits the JBL 2412, 2412H, 2412H-8, 2412-8, 2412-1, 2412H-1, 2412H-1-8, 2412-1-8, 2413, 2413H, 2413-H, 2413H-8, driver and horn.
Also fits the JBL EON 10-G2, EON 10, EON Power 10, EON 1500 cabinets, JRX series
If your diaphragm measures the same and looks like the one pictured, then this diaphragm is the one you need.
JBL 2412 All Metal Diaphragm 8 Ohm
Specifications
- 8 ohm
- Our DCR is 4.2 +or- 8%
- JBL's DCR is 4.5 +or- 8%
- This means our diaphragms will play as loud as the originals
- Overall diaphragm diameter 2 5/8-in or 68mm
- Overall length 3 1/2-in or 90mm
- Voice coil diameter 1-in or 25mm
- Mounting holes are 1 1/2-in or 38mm center to center
This diaphragm has a metal case and should be more resistant to transient peaks in power and should last longer than the original plastic enclosed diaphragm.It is physically more robust than the 2412. It also has a titanium dome with a copper clad edge-wound voice coil on a Kapton former just like the original JBL diaphragm. |
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
| MODEL ZG-10CA / DG-10C-A
M-D-10C
26A65D1F
087838253383
TOA 507 07 008 30
TOA Voice for Horn SC-630, SC630M | Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
| Spare part Diaphram TOA DG-60B-A για SC-615, SC-615M |
Reviews
There are no reviews yet.