RPM500 offers pure and accurate frequency response from 50Hz to 30kHz. The 90-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition Pure and accurate frequency response from […]
RPM500 offers pure and accurate frequency response from 50Hz to 30kHz. The 90-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition
Pure and accurate frequency response from 50Hz to 30kHz
90-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion
50-Watt 5 ¼-inch (133.3mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround
40-Watt silk-dome tweeter with 1 ¼-inch (31.7mm) voice coil
Proximity Control for low-end tailoring
HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment
Included monitor isolation pad dramatically decreases structure-borne resonances
Integrated radio frequency protection plus magnetic shielding preserves signal purity
Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers
On/off transient protection and external mains fuse
Output current limiter, over-temperature limiter, and subsonic filter
Flared rear-firing bass port delivers low-frequency depth and definition
XLR, balanced ¼-inch TRS, and RCA inputs
Dimensions (each): 12.5″ x 10.1″ x 8“
Weight (each): 17.2 lbs
Power configuration: Bi-amplified
LF Driver size: 5.25 inch (133.3mm)
HF Driver size: 1.25 inch (38.1)
LF Driver amp: 50-Watt
HF Driver amp: 40-Watt
Input: XLR, balanced 1/4 inch (6.3mm), RCA
Enclosure type: Ported
Frequency range: 50 Hz to 30 kHz
Weight
7.80 kg
Reviews
There are no reviews yet.
Be the first to review “AKAI RPM-500 Active studio monitor 90W (Piece)” Cancel reply
Perfect for Home Studios and Multimedia Applications
2-Way Studio Monitors with 2 x 8 Watts Power Output
Dedicated Volume, Mic Level, Bass and Treble Controls
Powerful 4'' Woofers and High-Resolution 1.5'' Tweeters
1/8'' TRS Stereo and RCA Stereo Input Connectors
Content
RPM500 offers pure and accurate frequency response from 50Hz to 30kHz. The 90-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition
Pure and accurate frequency response from 50Hz to 30kHz
90-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion
50-Watt 5 ¼-inch (133.3mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround
40-Watt silk-dome tweeter with 1 ¼-inch (31.7mm) voice coil
Proximity Control for low-end tailoring
HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment
Included monitor isolation pad dramatically decreases structure-borne resonances
Integrated radio frequency protection plus magnetic shielding preserves signal purity
Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers
On/off transient protection and external mains fuse
Output current limiter, over-temperature limiter, and subsonic filter
Flared rear-firing bass port delivers low-frequency depth and definition
XLR, balanced ¼-inch TRS, and RCA inputs
Dimensions (each): 12.5" x 10.1" x 8“
Weight (each): 17.2 lbs
Power configuration: Bi-amplified
LF Driver size: 5.25 inch (133.3mm)
HF Driver size: 1.25 inch (38.1)
LF Driver amp: 50-Watt
HF Driver amp: 40-Watt
Input: XLR, balanced 1/4 inch (6.3mm), RCA
Enclosure type: Ported
Frequency range: 50 Hz to 30 kHz
M-Audio BX8 D3 Features:
150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
Bi-amplified design delivers a sound that's both powerful and precise
Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
Acoustic Space Control tailors your monitor to your mix space
Volume control for dialing in the perfect playback level
Balanced combo input allows for flexible installation
Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
Frequency Range: 37Hz – 22kHz
Crossover: 2.0kHz
Maximum Peak Input Level: -2dBU
Input Types: Balanced 20kO XLR, and TRS
Unbalanced: 10kO TS
Input Sensitivity: -12dBU
HF Driver Size: 31.8 mm (1.25“)
LF Driver Size: 203 mm (8“)
Amplifier Power: 150W Class A/B
HF Driver Power Amp: 70W
LF Driver Power Amp: 80W
Port: Rear internally flared
Controls: Yes
Magnetic Shielding: Yes
AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
Enclosure Construction: MDF
Enclosure Finish: Black PVC
Baffle Construction: Injection-molded ABS
Baffle Finish: Matte black with Soft-touch
Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
Weight: 10.5 kgs (23.1 lbs)
Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
Behringer MS-16 2x8W 2-Way Active Personal Monitor System
The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.
Full Description
Compact and Ideal For Home Studio
The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.
Input Connections
The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.
Features
Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
Dedicated Volume, Bass and Treble controls for more flexibility
Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
1/8'' TRS headphone connector with auto-mute loudspeaker function
Magnetically shielded for placement near computer monitors
Designed and engineered in Germany
Specifications
Woofer: 4''
Tweeter: 1.5''
Output Power: 2 x 8 Watts
Frequency Response: 80Hz - 20kHz
Speaker Impedance: 4?
Input 1:
Connector: 1/8'' TRS Stereo
Input Level: -10dBm, 10k?
Input 2:
Connector: RCA Stereo
Input Level: -10dBm, 10k?
Mic Input:
Connector: 1/4'' TRS
Input Level: -50dBm, 50?
Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
Weight: 4kg
PRICE PER UNIT
The most powerful AX monitor
With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.
The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.
Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.
Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.
On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies. There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.
Review: A8X: a "powerful link" between near- and midfield monitors!
"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)
Mid-Woofer
Number
1
Basket Ø
8.5" (220 mm)
Voice coil Ø
1.5" (38 mm)
Cone material
Carbon/Rohacell/Glass Fiber
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
150 W / 225 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 75 W
Control panel
Input Sensitivity
-∞ to +14 dB
High Shelf EQ > 5 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR / RCA
General data
Frequency response
38 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥112 dB
Max. peak
≥120 dB
Crossover frequencies
2300 Hz
Input impedance
30 KOhm
Weight
28.7 lb (13 kg)
Magnetically shielded
No
Height x Width x Depth
15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.