ALESIS iO Hub Sound Card USB

The Alesis iO Hub is a professional two-channel audio interface that empowers you to create anywhere. Made for traveling musicians and mobile producers, iO Hub enables you to record, lay down, and mix musical ideas with your Mac and PC whenever inspiration strikes. Its compact, portable design fits in your gig or laptop bag and leaves an ultra-small footprint in any recording or performing setup. Plus, a single USB connection provides power to iO Hub and plug-and-play connectivity; no power supply or additional drivers required. iO Hub can also connect to your iPad and other devices with the Apple iPad Camera Connection Kit (sold separately) for even more recording-platform flexibility.

With two XLR+1/4' combo inputs, iO Hub can accommodate nearly any audio source: connect microphones, keyboards, guitars, basses, and much more to start crafting your song. Channel one features selectable 48v phantom power for tracking with condenser microphones, and channel two provides an additional switch that allows a guitar or bass to be connected directly to iO Hub.

iO Hub supports stereo playback from your computer for professional mixing and monitoring. Connect its two 1/4' outputs directly to your active monitor speakers, amplifier, PA system, and use the direct switch for zero-latency monitoring of the input signal – ideal during session tracking, when adding overdubs, or laying down additional tracks. A stereo headphone output with a dedicated volume knob is also onboard for private recording and late-night mixing. Finally, a main-level control allows you to adjust the global volume, so you can mix and record at the optimal sound level.

Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.

The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.

The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.

System Requirements
Mac           PC

    * Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
    * 1 GB RAM (2 GB recommended)
    * 6 GB free disk space
    * Intel® processor (no PowerPC® support)
    * One FireWire port

         

    * Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
    * 1 GB RAM (2 GB recommended)
    * 5 GB free disk space
    * One FireWire port

Compatibility

ASIO, Core Audio, WDM, MME, and multi-client drivers

Mbox Pro Hardware
Pro Tools Mbox Pro

Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.

    * Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
    * FireWire connection
    * Professional-grade circuitry and converters deliver exceptional audio performance
    * Up to 24-bit, 192 kHz sample rates*
    * Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
    * Built-in guitar tuner
    * Onboard DSP offers flexible cue mixing and reverb effects
    * Assignable Pro Tools multi-function button on interface gives you fast access to software functions
    * Connect up to three pairs of monitors or do 5.1 surround mixing**
    * Hardware configuration:
          o 8 x 8 simultaneous channels of I/O
          o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
          o 4 1/4" TRS line inputs
          o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
          o 6 1/4" TRS balanced line outputs
          o 2 discrete 1/4” stereo headphone outputs with separate volume controls
          o Stereo S/PDIF digital I/O
          o 1 MIDI input, 1 MIDI output
          o Word clock I/O
          o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
          o Dedicated monitor volume knob

* Up to 96 kHz sample rates supported with Pro Tools LE software.

** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software

The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.

Key Features

    * Award-winning Pro Tools recording, editing, and mixing
    * 48 simultaneous stereo audio tracks (expandable with Toolkit options)
    * Includes over 70 professional effects and virtual instruments
    * Professional MIDI sequencing with dedicated MIDI Editor window
    * Integrated Score Editor based on award-winning Sibelius notation software
    * Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
    * Unique Beat Detective LE automatic groove analysis and correction tool
    * ReWire support for streaming your favorite applications right into Pro Tools
    * Huge selection of compatible third-party plug-ins and software options
    * Works on Windows and Mac computers

Features:

USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out

Technical Specifications

Microphone Inputs:    Female XLR Pin 2 Hot
Input Impedance:    3kΩ balanced
Phantom Power:    +48 Volts
Maximum gain:    +58 dB
E.I.N. (at max gain):    -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level:    +21 dBu at minimum gain
Frequency Response:    +0/-1 dB, 20Hz - 20kHz
THD+N:    +18 dBu maximum
Impedance:    32Ω Balanced, 16Ω Unbalanced
Headphone Output:    1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface:    5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate:    44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range:    A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements:    12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.

The 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8pres or other MOTU FireWire audio interfaces.

Use the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8preʼs main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.

The 8pre includes a 16-channel MIDI interface. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.

The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

The 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical "lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD or Traveler, the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.

If you have a 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.