AMERICAN AUDIO VLP-300 Power Amplifier 2×150 Watts

389.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
VLP Series Power Amplifier Output Power: – 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD – 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) – 300W RMS @ 8 Ohms, 1K Hz, 1% THD Total Harmonic Distortion: Less Than 0.1% (20Hz – 20kHz @ 8 Ohms) Frequency Response: […]

 

Read more

VLP Series Power Amplifier


Output Power:
– 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
– 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
(Bridge Mode, Mono)
– 300W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz – 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz – 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 260

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift

Dimensions (LxWxH): 13.25″ x 19″ x 1.75″ / 336 x 482 x 44mm (1-rack mount space)

Weight: 24 lbs. / 11Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift

Weight 11.00 kg

Reviews

There are no reviews yet.

Be the first to review “AMERICAN AUDIO VLP-300 Power Amplifier 2×150 Watts”

Your email address will not be published. Required fields are marked *

Quick Comparison

AMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts removeINTERM R-300 PLUS Power Amplifier removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeINTERM R-150 PLUS AMPLIFIER 2X75W removeTOA DA-250F CU Multichannel Power Amplifier 4Χ250W/4Ω removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS remove
NameAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts removeINTERM R-300 PLUS Power Amplifier removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω removeINTERM R-150 PLUS AMPLIFIER 2X75W removeTOA DA-250F CU Multichannel Power Amplifier 4Χ250W/4Ω removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS remove
Image
SKUE004734R-300 PLUSE009302R-150 PLUSDA-250F CUED600
Rating
Price 389.00 incl. GR VAT 571.00 incl. GR VAT 754.00 incl. GR VAT 459.00 incl. GR VAT 1,451.71 incl. GR VAT 585.89 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

VLP Series Power Amplifier


Output Power:
- 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
(Bridge Mode, Mono)
- 300W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 260

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift

Dimensions (LxWxH): 13.25" x 19" x 1.75" / 336 x 482 x 44mm (1-rack mount space)

Weight: 24 lbs. / 11Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift

Reference Quality Power Amplifier [R-300 Plus]

  • Controls :
    Front : Power on/off switch, attenuator, LED indicator
    Rear : Mode seletor switch, Stereo/bridged mono switch
  • Connectors :
    Input : 1 XLR, 1/4" balanced per channel
    Output : 5-way binding post and SpeakonTM per channel
  • Indicators :
    Power : Green, Protection : Red, Clip : Red, Signal : Green
  • Power Source : 100-120VAC or 220-240VAC; 50/60Hz
    (supplied AC mains transformer depends on country requirements)
  • Power Consumption : 250W(2.4A)
  • Weight : 8.4kg/18.5lb
  • Dimensions (WxHxD) : 482x88x317mm/19x3.5x12.5in


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Weight11.00 kg8.40 kg12.60 kg7.20 kg7.00 kg13.81 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.00 kg
Weight 8.40 kg
Weight 12.60 kg
Weight 7.20 kg
Weight 7.00 kg
Weight 13.81 kg