AMERICAN AUDIO AVANTE A10 Active Loudspeaker 10inch 1000 Watt Peak POWER 300W RMS

379.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB […]

 

Read more

The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB amplifier drives 50W (RMS) to the high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.

The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a two-band EQ to further enhance the sound. The H-PP molded enclosure features a steel grille and a dual position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4″ input, two RCA inputs, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10 Achromic Series loudspeaker ships with a power cord.

  • Amp Power: 1000W dynamic
    • LF: Class-D 250W (RMS)
    • HF: Class-AB 50W (RMS)
  • Built-in digital signal processing (DSP) with LCD screen, EQ, and Presets
    • Preset 1: Normal
    • Preset 2: Live
    • Preset 3: Club
    • Preset 4: Speech
  • Frequency Range: 70 Hz to 20 kHz
  • Dispersion (H x V): 90 x 60°
  • Output (Peak SPL at 1m): 121 dB
  • Drivers: 10″ woofer with 2″ voice coil + 1″ HF compression driver
  • Inputs: Balanced combo XLR-1/4″ and two RCA
  • Output: Balanced XLR
  • Enclosure: H-PP molded
  • Grille: 1.2mm steel
  • Handle: 1 x top
  • Fly Points: 2 on top, 1 on back
  • Pole Mounting: Dual position 0 or 7.5°
Type 10.0″ / 254.0 mm, 2-way active loudspeaker
Frequency Range 70 Hz to 20 kHz (-10 dB)
SPL Level Peak: 121 dB
Amplifier Power 1000 W Dynamic, 250 W Class-D (LF) + 50 W Class-AB (HF) RMS
DSP DSP Features: LCD screen with EQ and multiple presets
Drivers 10.0″ / 254.0 mm woofer with 2.0″ / 50.8 mm voice coil
1.0″ / 25.4 mm HF compression driver
Input and Output Connectors Input: Balanced female combo XLR-1/4″ / 6.35 mm jack
Input: 2 x RCA (phono)
Output: Balanced male XLR
Enclosure H-PP molded
Grille Material 0.05″ / 1.20 mm steel
Handles 1 x top
Flypoints 2 top, 1 back
Pole Mount Dual Position: 0 and 7.5°
Power Input 115 VAC, 60 Hz
Power Consumption 400 W
Dimensions (H x W x D) 20.9 x 12.2 x 11.8″ / 530.9 x 309.9 x 299.7 mm
Weight 25.0 lb / 11.3 kg
Weight 11.30 kg

Reviews

There are no reviews yet.

Be the first to review “AMERICAN AUDIO AVANTE A10 Active Loudspeaker 10inch 1000 Watt Peak POWER 300W RMS”

Your email address will not be published. Required fields are marked *

Quick Comparison

AMERICAN AUDIO AVANTE A10 Active Loudspeaker 10inch 1000 Watt Peak POWER 300W RMS removeVENTIS110A FBT Active Speaker 2-way 800W removeOMNITRONIC XKB-210A 2-Way 350W Bluetooth Active speaker 10" woofer 1.35" driver 11038794 removeRCF ART 410-A Active speaker system 10" + 1", 400W removeHK AUDIO PREMIUM PR:O 10 XA Active Speaker Various Applications 600 Watts removeELECTRO VOICE ETX-10P POWERED LOUDSPEAKER 2 WAY 2000W remove
NameAMERICAN AUDIO AVANTE A10 Active Loudspeaker 10inch 1000 Watt Peak POWER 300W RMS removeVENTIS110A FBT Active Speaker 2-way 800W removeOMNITRONIC XKB-210A 2-Way 350W Bluetooth Active speaker 10" woofer 1.35" driver 11038794 removeRCF ART 410-A Active speaker system 10" + 1", 400W removeHK AUDIO PREMIUM PR:O 10 XA Active Speaker Various Applications 600 Watts removeELECTRO VOICE ETX-10P POWERED LOUDSPEAKER 2 WAY 2000W remove
ImageOMNITRONIC XKB-210A 2-Way Speaker, active, Bluetooth
SKUE011471FBT00037XKB-210AART410APRO 10 XAE006030
Rating
Price 379.00 incl. GR VAT 998.00 incl. GR VAT 372.00 incl. GR VAT 553.46 incl. GR VAT 680.75 incl. GR VAT 1,385.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB amplifier drives 50W (RMS) to the high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.

The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a two-band EQ to further enhance the sound. The H-PP molded enclosure features a steel grille and a dual position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4" input, two RCA inputs, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10 Achromic Series loudspeaker ships with a power cord.

  • Amp Power: 1000W dynamic
    • LF: Class-D 250W (RMS)
    • HF: Class-AB 50W (RMS)
  • Built-in digital signal processing (DSP) with LCD screen, EQ, and Presets
    • Preset 1: Normal
    • Preset 2: Live
    • Preset 3: Club
    • Preset 4: Speech
  • Frequency Range: 70 Hz to 20 kHz
  • Dispersion (H x V): 90 x 60°
  • Output (Peak SPL at 1m): 121 dB
  • Drivers: 10" woofer with 2" voice coil + 1" HF compression driver
  • Inputs: Balanced combo XLR-1/4" and two RCA
  • Output: Balanced XLR
  • Enclosure: H-PP molded
  • Grille: 1.2mm steel
  • Handle: 1 x top
  • Fly Points: 2 on top, 1 on back
  • Pole Mounting: Dual position 0 or 7.5°
Type 10.0" / 254.0 mm, 2-way active loudspeaker
Frequency Range 70 Hz to 20 kHz (-10 dB)
SPL Level Peak: 121 dB
Amplifier Power 1000 W Dynamic, 250 W Class-D (LF) + 50 W Class-AB (HF) RMS
DSP DSP Features: LCD screen with EQ and multiple presets
Drivers 10.0" / 254.0 mm woofer with 2.0" / 50.8 mm voice coil
1.0" / 25.4 mm HF compression driver
Input and Output Connectors Input: Balanced female combo XLR-1/4" / 6.35 mm jack
Input: 2 x RCA (phono)
Output: Balanced male XLR
Enclosure H-PP molded
Grille Material 0.05" / 1.20 mm steel
Handles 1 x top
Flypoints 2 top, 1 back
Pole Mount Dual Position: 0 and 7.5°
Power Input 115 VAC, 60 Hz
Power Consumption 400 W
Dimensions (H x W x D) 20.9 x 12.2 x 11.8" / 530.9 x 309.9 x 299.7 mm
Weight 25.0 lb / 11.3 kg

Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.

For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.

The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the  VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.

Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.

Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.

Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.

  • 2-way, bi-amplified, bass reflex design
  • Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
  • Digital Signal Processor with graphic display
  • 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
  • High efficiency switch mode power supply
  • Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
  • 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
  • 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
  • Frequency response from 58Hz to 20 kHz
  • 80°H x 50°V Constant Directivity Rotatable Horn
  • 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
  • Speaker stand socket, one aluminium handle
  • 45° monitor taper
Code: 40640
Configuration: 2 way
Built-in amplifier LF/HF: 700/200 W RMS
Built-in amplifier peak LF/HF: 1400/400 W
Frequency response: 58Hz - 20KHz -6dB
Low Frequency woofer: 10 - 2 coil inch
High Frequency driver: 1 - 1.4 coil inch
Maximum SPL cont/peak: 124/131 dB
Dispersion: 80° x 50° rotatable HxV
Input impedance: 22 Kohm
AC Power requirements: 640 VA
Input connector: XLR with loop, RCA ST
Power cord: 5/16.4 m/ft
Net Dimension (WxHxD): 329x575x325 / 12.95x22.63x12.79 mm/inch
Net Weight: 15.6/34.39 Kg/lb
Transport Dimension (WxHxD): 420x675x400 / 16.53x26.57x15.74 mm/inch
Transport Weight: 18.1/39.90 Kg/lb
  • Class D biamp amplifier (LF 175 W, HF 75 W)
  • 2-way bass-reflex enclosure with 25 cm woofer and 3.5 cm driver
  • 1 mic/line input (XLR/jack) with level control
  • 1 line input (XLR/RCA) with level control
  • Master control with 2-band EQ
  • Control via Bluetooth
  • Black metal grille with acoustic foam
  • 3 Rugged carrying handles
  • Application possibility: Standing; monitoring; on tripod

XKB-210A

Price-performance champion:

You have high demands regarding your speaker, but a small budget? Then Omnitronic offers you exactly the right thing with the XKB-210 A: the equipment and sound of the active speaker can keep up with significantly more expensive systems. It is ideal for events with live bands and DJs.
OMNITRONIC XKB-210A connections
Equipment
Powerful bass, clear mids and trebles determine its sound. Further active speakers can be connected to the XKB-210 A via its XLR output. An integrated Bluetooth player, a Biamp amplifier and a 2-band EQ complete the package.
OMNITRONIC XKB-210A design
Thought-out design
Thanks to the carrying handles integrated into the design, you can carry the box comfortably with one hand. You can also use the box as a floor monitor: This works just as well as mounting it on a tripod or on a wall.
Power supply: 230 V AC, 50 Hz
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Power: Program: 350W Rated: 75W RMS HF Rated: 175W RMS LF
Frequency range: 65 - 20000 Hz
Sensitivity: 95 dB
Control: Bluetooth
Attachment system: Flange: Ø 36 mm
Circuitry: Class D Biamp
Controls: Limiter
Connections: Output: line via 1 x 3-pin XLR Input: line via 1 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version) Input: line via 1 x stereo RCA Input: line via 1 x 3-pin XLR
Input channels: 1 x mono via XLR or RCA or bluetooth, channel control via Rotary dial 1 x mono with Mic-line switch via Combination socket (XLR/jack), channel control via Rotary dial
Equalizer: Master: 1 x 2-band tone control
Speaker: 1 x woofer (10") approx. 25 cm with ferrit magnet Voice coil lows (1.5") approx. 4 cm Voice coil compression tweeter highs (1.35") approx. 3.5 cm
Type of speaker: Compact cabinet speaker
Carrying handle: 3 pc/pcs
Material: Plastic
Dimensions: Width: 31 cm Depth: 32 cm Height: 48 cm
Weight: 11,15 kg

Features

    400 Watt digital bi-amplification
    127 dB max spl
    Wide dispersion 90 x 70 constant directivity horn
    10" High power woofer, 2.5" voice coil
    1" Mylar dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 50 Hz ÷ 20 kHz
    Max SPL: 127 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 1" 1.4" voice coil
    Woofer: 10" 2.5" voice coil

Input/Output Section

    Input signal: bal/unbal
    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1800 Hz
    Limiter: Fast limiter, RMS limiter
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Cabinet Material: Composite PP
    Hardware: 2 x M10 flying points
    Handles: 1 on top
    Pole Mount/Cap: yes
    Grille: steel
    Colour: Anthracite grey

Physical Specifications

    Height: 549/21.6 mm/inch
    Width: 340/13.38 mm/inch
    Depth: 304/11.96 mm/inch
    Net Weight: 13.5/29.76 kg/lbs

This remarkably versatile 10“/1" enclosure can serve as a satellite, a fullrange cabinet, and a low-profile wedge monitor. The Music/Speech knob adjusts its finely balanced and therefore feedback-resistant frequency response to suit the given application. All this and an onboard power amp make the PR:O 10 XA a very flexible sound reinforcement tool indeed.

Features
Application: Fullrange Cabinet / Stage monitor / Satellit
Output Power: 600 Watt
Speaker Output for Extension Cabinet
Mic and Line Input
Versatile High-class Tool

Title PREMIUM PR:O 
Product Class Active Systems
Model PR:O 10 XA
Frequency response +/- 3 dB 89 Hz - 19 kHz
Frequency response -10 dB 67 Hz - 19 kHz
Maximum SPL, @ 10% THD  121 dB
Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced
LF Speaker 10"
HF Driver 1"
Horn characteristics 90° x 60° CD horn
Equalizer Tone control
Subsonic filter 35 Hz
Peak limiter yes
RMS-Soundlimiter yes
HF protection (passive) Dyn. protection circuit
Amplifier 600 W class D - 4 ohms
Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 1, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 32 cm x 48 cm x 29 cm
Weight 13,9 kg / 30.6 lbs.

The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.

  • 10-inch LF SMX woofer
  • 1.25-inch HF titanium compression driver
  • 2000 W Class-D power amplifier with integrated FIR-Drive DSP
  • 134 dB peak SPL

 

Frequency Range 65 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass.
Maximum SPL 134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
Power Consumption 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A Current rating is 1/8 power.
Power Rating 2000 W
Frequency Response 85 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass.
Coverage (Nominal -6 dB) H 90 °
Coverage (Nominal -6 dB) V 60 °
LF Transducer SMX2100 254 mm (10 in)
HF Transducer DH3-B 1.25-in titanium compression driver
Crossover Frequency 1700 Hz
Connector Type (2) XLR/TRS combo jack and (1) XLR link output
Enclosure Material 18-mm, 13-ply birch plywood with EVCoat
Grill 16AWG steel with powdercoat
Suspension (8) M10 suspension points
Height 526 mm (20.71“)
Width 330 mm (12.99“)
Depth 365 mm (14.37“)
Weight Net 20.3 kg (44.75 lbs)
Shipping Weight 22.9 kg (50.49 lbs)

 

Weight11.30 kg19.00 kg11.4 kg13.50 kg13.90 kg22.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.30 kg
Weight 19.00 kg
Weight 11.4 kg
Weight 13.50 kg
Weight 13.90 kg
Weight 22.90 kg

Recently Viewed Products