VOX AMPLUG 2 CL Mini Guitar Headphone Amplifier

Mini Guitar Headphone Amplifier with advanced analog tone simulation modeling of authentic pure tone with boutique inspired clean amp. AUX input for connection to an external audio source. Operation with 2xAAA batteries.

• Model Name: LDHPA1
• Product Type: headphone amplifier
• Type: 1-channel stereo
• Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
• Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
• Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
• Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
• Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
• Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
• Headphone Outputs: 1
• Headphone Output Connectors: 3.5 mm stereo jack
• Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
• Minimal Connected Impedance per Channel: 16 ohms
• Frequency Response: 20 Hz - 40,000 Hz
• THD 1 kHz Sine: 0.04%
• Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
• Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
• Power Supply: 9 V DC block battery, DC jack
• Operating Voltage: 9 V DC
• Power Consumption: Nom. 70 mA / Max. 150 mA
• Housing Material: plastic
• Housing Surface: soft-touch
• Housing Colour: black
• Width: 80 mm
• Height: 42.5 mm
• Depth: 133 mm
• Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable

The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.

Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.

The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.

The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1, and USBPre-2.

• Three isolated headphone outputs with individual volume controls.
• 125 dB dynamic range with flat frequency response.
• Durable 1/4-inch connectors, panel mounted for strength.
• Stereo or mono monitoring.
• Peak LED indicates headphone overload.
• Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
• Loop Output to connect additional HX-3's in series.
• All-metal connectors solidly mounted to the chassis for durability and RF immunity.
• Free from "Pin-1" grounding problems.
• Internal battery-power for up to 18 hours from two AA alkaline batteries.
• Chassis-isolated 5 to 18 VDC input for easy external DC powering.
• Power LED indicates low battery power.
• High strength, extruded aluminum chassis with protective metal end panels.

Info

Apogee Groove is the best portable USB DAC and headphone amp for listening to music on your Mac or PC. Groove takes the same high quality audio technology found in the worldʼs most prestigious recording studios and delivers it to your laptop. Connect Groove directly to your computer and connect your headphones or powered speakers directly to Groove. Itʼs that easy. Youʼll be amazed by the difference in sound quality. Highlights: USB 2.0 connection to Mac and PC Up to 24 bit / 192kHz audio ESS Sabre DAC Constant Current Drive?, Ultra-smooth frequency response for any headphones Quad Sum DAC?, 4 DACs per channel for highest dynamic range and lowest distortion Asynchronous clocking Max output level: 225mW into 30 Ohm Multi-color LEDs for status and level indication Powered by USB Top panel buttons for adjusting output level and muting Compact and portable (95mm H x 30mm W x 16mm T) Premium aluminum build quality Built in the USA Pricing to be announced

Specifications
General

Frequency response
    

 
    

20 Hz - 20  kHz (+0 dB, -1.5 dB)

Signal-to-noise ratio
    

 
    

100  dB (IHF A-weighted, input level control min.)

Channel separation
    

 
    

80 dB between adjacent channels

Line input
    

 
    

Front: 6.3 mm jacks, unbalanced
Rear: RCA connectors, unbalanced

   Input impedance
    

 
    

40 kOhm

   Nominal level
    

 
    

-10 dBV (0.3 V)

Headphone outputs
    

 
    

four 6.3 mm stereo jacks

   Maximum output power
    

 
    

2 x 1.5 W at 8 Ohm (1 channel in use)
2 x 1,2 W an 8 Ohm (four channels in use)

Power supply
        

230 V AC, 50 Hz

Power consumption
    

 
    

10 W

Dimensions (W x H x D)
        

482  mm x 44  mm x 196  mm

Weight
    

 
    

4 kg