Content |
Z-80 with Wireless Remote
UK Version
• Z80 MK2 included wireless remote
• UK power connector
Technical Info
Power supply: AC 230/240 V – 50/60 Hz
Heater: 700 Watt
Output: 2500 cu. ft/min
Tank capacity: 0,8 L
Fluid consumption rate: 125 min/ L
Included remote: FC-5
Optional remote: FC-4
Dimensions: 330 x 160 x 130 mm (LxWxH)
Weight: 4,0 kg
| Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.
Features:
- Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
- DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. Pump and fan can here be controlled separately. Thus, the connected fan can be used as wind machine as well. The connection is done with 5pin-XLR-plugs, two following addresses will be taken. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged. The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (option). The adjustment of the fan is done directly at the machine, the pump can be adjusted via the analog control. The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustments of the pump and the fan are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted levels.
With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.
- Robust flightcase version
The flightcase on wheels protect the inbuild machine and fan and ensures an easy transport and flexible handling. Handles at both sides of the case allow an easy lifting. Removable lids enable direct access to control panels and fluid tank.
Liquid
The following Look fog liquids are available for the Viper 2.6/Viper deLuxe: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
Safety
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Technical Data
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 - 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg | The party smoke-machine
* Ideal for party-rooms or small discotheques
* Powerful output
* With ON/OFF remote control
* Remote-control connection via 3-pin IEC-socket
* With mounting-bracket
* Quality thermostat
* Overheat protective switch
SPECIFATIONS
Power supply: 230 V AC, 50 Hz ~
Power consumption: 700 W
Smoke-output: approx. 2.5 m
Warm-up time: approx. 5 min.
Fluid consumption: approx. 90 ml/min.
Output volume: approx. 90 m?/min.
Tank capacity: 1 l
Dimensions (LxWxH): 325 x 235 x 230 mm
Weight: 3.5 kg |
The ZR33 Hi-Mass is a powerful and instant atmosphere generator for large clubs, stage productions, rental companies and industrial applications.
* Continuous output
* 1000 m³/min fog output
* 1500 W heat exchanger
* 8 min heat-up time
* Floor standing or truss mounting
* 9.5 liter fluid capacity
* Different fluid options for different applications
* Low fluid sensing
* Onboard DMX
* On-board control panel
* Removable panel for remote control
* Multifunctional remote control
|
Martin JEM CLUB SMOKE Machine - Remote Control
| 51701986 Compact low fog machine (450 W), 1.2 liter tank, remote control, ice cube cooling
- Works with standard fog fluid and ice cubes
- Low fluid consumption rate
- Continuous activation
- Water drainage valve system allows for easy cleanup
- Temperature control via thermo switch
- Removable tank with level indication
- Rugged metal housing
- Short warm-up time
- Output distance: Approx. 2 m
- Controlling by wired remote control
- For application areas such as: Halloween; theater
Package contents
- 1 x device, 1 x user manual, 1 x container, 1 x filter
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
420 W |
IP classification: |
IP20 |
Power connection: |
Fixed power supply cord with safety plug |
Warm-up time: |
Approx. 3 min |
Output distance: |
Approx. 2 m |
Tank capacity: |
1,2 l |
Fluid consumption: |
Approx. 12 ml/min |
Ice chamber: |
0,8 kg |
Control: |
Wired remote control |
Housing color: |
Black; silver |
Heater: |
400 W |
Dimensions: |
Width: 23,5 cm
Depth: 54 cm
Height: 24 cm |
Weight: |
5,00 kg |
|
Reviews
There are no reviews yet.