| Content | Apart CM6T is a two-way low impedance or 100 volt loudspeaker suitable for the distribution of microphone calls and background music. In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier.
For 100 volt use, the CM6T is equipped with a high-quality 6 watt 100 volt transformer with several power tappings (6 - 3 – 1.5 watts).
CM6T is easy to install, due to its simple quick mounting system with only 3 screws. From 12 pieces on, the CM6T loudspeakers can be painted optionally in any other RAL color (Ref. PAINT-CM). |
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
| Driver Complement |
|---|
| Tweeter | | Quantity | 1 | | Diameter | 1" (2.54cm) | | Type | Pure Aluminum Dome | | Mid / Woofer | | Quantity | 2 | | Diameter | 4 1/2" (11.43cm) | | Type | High Definition Bass/Midrange Driver | | Bass Radiator | | Quantity | 2 | | Diameter | 5 1/4" (13.34cm) | | Type | Planar Bass Radiator |
| Electrical |
|---|
| Audio Inputs | | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | | Maximum Sensitivity | | 1 watt @ 1 Meter | 92 dB | | Total Frequency Response | | Overall | 30 Hz - 30 kHz | | Nominal Impedance | | Compatible with | 8 ohm | | Crossover | | A/V Receiver Crossover Setting | Small (60 Hz) | | Power Handling | 10 - 250 watts per channel |
| Installation |
|---|
| Cut Out Dimensions | | Height | 10 3/8" (26.35cm) | | Width | 10 3/8" (26.35cm) | | Mounting Depth | 5 7/8" (14.92cm) | | Grille Dimensions | | Height | 11 1/2" (29.21cm) | | Width | 11 1/2" (29.21cm) | | Outer Flange | | Height | 11 1/2" (29.21cm) | | Width | 11 1/2" (29.21cm) | | Placement | | Orientation | In Ceiling | | Cabinet Type | | Speaker Enclosure | Sealed Medite |
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
| * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-3/8” | 11.11 cm
Driver Complement :One 1" pure aluminum dome tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :30 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2.0 kg
Warranty :5 Years |
1 x 6 ½ ¨ Mineral Filed Polymer Cone
2 x ¾ ¨ Soft Dome Tweeter
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 22 x 7
One Speaker with Dual Inputs
|
Reviews
There are no reviews yet.