| Content | Waterproof 2-Way Built-in Loudspeaker
- Size: 6.5“
- Woofer & tweeter
- Grid made of seawater resistant V4A steel
- Impedance: 8 Ω
- Rated power: 60 W
- Design: Round
- Protection class: IP65
- Colour: Signal White (Ral 9003)
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
Features:
Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker. Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil. High power handling of 400 Watts with high sensitivity provides high SPL capability. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.
Specifications:
Frequency Response 30 Hz - 4.5 kHz, -10dB Maximum Power Handling 600 Watts, long term 1000 Watts, 2 hrs. (pink noise) Impedance 8 Ohms SPL 121dB continuous, 124dB peak, long term Beamwidth Not Applicable Horizontal Beamwidth Not Applicable Vertical Beamwidth Not Applicable Directivity Not Applicable Construction Kevlar Reinforced Cone Magnet Saturated-gap Voice Coil 3" Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm) Weight 17 lb (7.7 kg)
|
In-Ceiling Audiophile Magic
RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout.
RC60i Features:
- Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.
- RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
- Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
- Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
- Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).
- Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).
- RCi speakers have paintable grilles and practically disappear into any room.
- RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
| Dimensions - Cut-Out Diameter | 7 5/8 (19.37cm) " | | Dimensions - Mounting Depth (includes 1/2 drywall)“ | 2 3/8 (6.03cm) " | | Dimensions - Overall Depth | 2 7/8 (7.30cm) " | | Dimensions - Overall Diameter | 9 (22.86cm) " | | Dimensions - Pre-Construction Bracket | PB 60 | | Driver Complement Mid / Woofer - Diameter | 6 1/2 (16.51cm) " | | Driver Complement Mid / Woofer - Quantity | 1 | | Driver Complement Mid / Woofer - Type | Dynamic Balance driver with mineral-filled polymer cone and rubber surround | | Driver Complement Tweeter - Diameter | 3/4 (1.91cm) " | | Driver Complement Tweeter - Quantity | 1 | | Driver Complement Tweeter - Type | Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount | | Electrical - Efficiency | 89 dB | | Electrical - Inputs | Spring-loaded clips | | Electrical - Lower -3dB Limit | 60 Hz | | Electrical - Nominal Impedance | 8 ohms | | Electrical - Recommended Amplifier Power | 20 - 100 watts per channel | | Electrical - Total Frequency Response | 40Hz - 20kHz | | Electrical - Upper -3dB Limit | 20 kHz | | Shipping - Total Shipping Weight | 6 pounds | | Shipping - Unit of Measure | pair | | Warranty - Speaker Warranty | Lifetime |
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
|
Tweeter ¾" ring radiator x 2
Mid/Woofer 8" aerated polypropylene x 1
Frequency Response 30 Hz - 27 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-150 W/ Channel
Efficiency 88 dB
Dimensions(cm) 28.26 x 13.02
|
Reviews
There are no reviews yet.