| Content | The Apart CMX20T 2-way built-in loudspeaker has an exceptional high quality and very good bass response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CMX20T is equipped with a high-quality 20 watt 100 Volt transformer with several power tappings.
The loudspeaker has an 8” enforced polypropylen woofer and 1” tweeter. Due to this enforced woofer, the loudspeaker has a very low distortion! It makes the CMX20T very suitable for the distribution of microphone calls and backgroundmusic at a higher volume level.
The housing is made of high quality ABS. The woofer is made out of enforced polypropylen with a rubber edge, what makes it moisture-proof.
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden behind the loudspeaker grill, which gives the loudspeaker a modern and striking design).
The CMX20T is in white color RAL 9010 and is also standard available in black (CMX20T-BL) and silver (CMX20T-SLV). From 12 pieces on, the loudspeakers can be painted optionally in any other RAL colour. (Ref.: PAINT-CM).
Type: Ceiling
Material: Plastic
Power: 60W RMS / 100W program @16ohms. 2.5,5,10,20W@100V
Ohms Connectivity: 16Ω
Sensitivity: 93dB@1W/1m
Max SPL: 110dB
LF, Woofer: 1x8\'\'
HF, twetter: 1x1\'\'
Frequency Response :50Hz-20KHz
Suspension: From false ceiling with 3 screws (internal)
Connectors: Τerminal
Dimensions Diameter /Height: ø 244 / 90
Dimensions Hole: 220mm
Minimum Depth: 90mm
Weigth :1.4 Kg
Color: White |
The Control 47C/T features extended bass performance with a wide 120° of coverage that allows fewer speakers to cover a large space. Ideal for a wide variety of applications, the Control 47C/T is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Features:
Proprietary Conical RBI® Technology Provides Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Large Backcan for Bass Response to 50 Hz
Elegant design fits any décor
Specifications:
Component: 6.5" woofer, 1" tweeter
Frequency Range: 50 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1 W 1M
Coverage: 120 degrees conical, consistent broadband
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 12" x 10.2“
Suspension Tabs: 3 on top panel
|
- Compact, high power handling.
- Completely sealed flush mounted high humidity area speaker.
- Plastic film diaphragm rated at 3W at 3.3k Ω and 1W at 10k Ω.
- Stainless steel punching net.
- ABS resin enclosure / Alloy coated ABS resin panel.
| Specification |
|
|---|
| Rated Input | 3W, 1W | | Rated Impedance | 3.3k Ω (3W), 10k Ω (1W) | | Sound Pressure Level | 88dB (1W, 1m) | | Frequency Response | 120 ~ 20,000Hz | | Ambient Temperature | -10 ~ +60°C | | Dimensions for Fixing Hol | ø150mm / Ceiling thickness; up to 50mm | | Dimensions | ø180 x 10 (exposed section) + 110mm | | Weight | 700g | | Finish | Frame and case; ABS resin, Off-white / Punching net; Stainless steel. |
|
|
Features:
- Consistent 90° broadband pattern control.
- Components:
300 mm (12 in) woofer with Kevlar-reinforced cone with 50 mm (2 in) voice-coil.
25 mm (1 exit) compression driver. - Extraordinary clarity for speech and vocals with extended frequency response for music.
- 250 Watt power handling with high sensitivity provides high SPL capability.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- Clean, contemporary grille and optional backbox available.
| System: Frequency Range (-10 dB): 34 Hz – 18 kHz Frequency Response (±3 dB): 47 Hz – 16 kHz Coverage Pattern: 90° conical, broadband (Avg 1k - 16kHz) Directivity Factor (Q): 8.7 (1k - 16kHz) Directivity Index (DI): 9.4 dB (1k - 16kHz) Long-Term System 250 W (1000 W peak), 2 hrs Power Rating, IEC: 150 W (600 W peak), 100 hrs Sensitivity (2.83V@ 1m):
94 dB measured half-space
99 dB computed for competitive comparison Maximum SPL: 118 dB cont ave (124 dB peak) Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance (321C): 8 ohms Transformer Taps(321CT): 70V: 60W, 30W, 15W, & 7.5W 100V: 60W, 30W & 15W Transducers: Low Frequency Driver: Kevlar reinforced cone, 50 mm (2 in) voice coil. High Frequency Driver: JBL 2412H-1 compression driver, 25 mm (1 in) voice coil. Physical: Input Connector (321C): Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2) 321C:
1) + in
2) + loop out
3) – loop out
4) – in Tap Connection (321CT): 321CT:
A) Common
B) 7.5W@70V, 15W@100V
C) 15W@70V, 30W@100V
D) 30W@70V, 60W@100V
E) 60W@70V, n/c@100V Safety Agency Rating: In accordance with IEC60849 / EN60849, Transformer in CT model
UL Listed per UL1876 Baffle: Metal, 366 x 366 mm (14.4 x 14.4 in), driver pre-mounted to baffle, ported, EZRail™ for easier installation to backbox. Baffle Attachment to MTC-300BB12 Backbox: Attach via either 4 corner holes M4 x 14 mm machine screws, or 6 side/end holes #10 x 0.5 in (12 mm) sheet metal screws. Grille Attachment to Baffl e: 4 pcs 4 mm machine screws in corners. Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffl e x depth from back of baffl e of 223 mm (8.8 in) on 321C & 240 mm (9.5 in) on 321CT. Net Weight: 321C: 7.3 kg (16.0 lbs) 321CT: 8.2 kg (18.0 lbs) Shipping Weight: 321C: 8.8 kg (19.4 lbs) 321CT: 9.8 kg (21.6 lbs) Included Accessories: Ported baffl e pre-attached, transformer on 321CT. Optional Accessories:
MTC-300SG12 Grille, square contoured, white.
MTC-300BB12 Backbox, 80 liters (3 cubic feet)
MTC-300T150 Transformer, 150 W for use with 321C. |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | Bass reflex type | | Rated Input | 60W (high impedance) | | Power Handling Capacity | Continuous pink noise: 90W(8Ω), 60W (16Ω)
Continuous program: 180W(8Ω), 120W(16Ω) | | Impedance | (100V Line) 170Ω (60W), 330Ω (30W) 670Ω (15W), 3.3kΩ (3W) | | Impedance | (70V Line) 83Ω (60W),170Ω (30W) 330Ω (15W), 670Ω (7.5W) 3.3kΩ (1.5W) | | Impedance | (25V Line) 83Ω (7.5W),170Ω (3.7W) 330Ω (1.9W), 670Ω (0.9W) 3.3kΩ (0.2W) | | Low (Adjustable | 16Ω, 8Ω | | Sound Pressure Level | 91dB(1W, 1m) | | Frequency Response | 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component | High frequency: Dome- type | | Speaker Component | Low frequency: 16cm cone-type | | Mounting Hole | ø250(maximum ceiling thickness: 37mm) | | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | | Finish Enclosure | Steel plate, plating | | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | | Punched net | Steel plate, white, paint | | Dust-proof bag | n/a | | Dimensions | ø280 x 227 (D)mm | | Weight | 5.1kg (including mounting accessories) | | Accessories Panel | 1 | | Ceiling reinforcement ring | 1 | | Safety wire | 1 | | Paper pattern | 1 | | Option Anchor hanging bracket | HY- AH1 | | Back can | n/a | | Tile bar bridge | HY- TB1 | | Trim ring | n/a | | Electronic controller | n/a |
|
The JBL Professional Control 227CT is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227CT incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 227CT features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 227CT enabling the system to be used on 70V or 100V distributed speaker lines.
The Control 227C and CT are easy to install and feature a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.
The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C and CT is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
To ensure long life and reliability, Control 227C and CT pass JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.
Features
- Consistent 120° broadband pattern control for exceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5" woofer; 1" compression driver
- Extraordinary clarity for speech and vocals with extended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille (sold separately)
Specifications
- Frequency Range (-10dB): 43Hz - 19kHz
- Frequency Response (-3dB): 75Hz - 17kHz
- Nominal Sensitivity: 90dB measured half-space; 95dB computed for competitive comparison
- Nominal Coverage Angle: 120 degrees conical, broadband
- Nominal Impedance: 8 ohms
- Low Frequency: 6.5" Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia.): 12" round baffle x depth from back of baffle of 5.8“
|
Reviews
There are no reviews yet.