| Content | Woofer: 8 inch coated paper
Tweeter: 1 inch silk dome tweeter
Music Power RMS: 160W / 8Ohm
Frequency Response: 45Hz to 20kHz
SPL 1W/1m: 93
SPL 1m/ max rated power: 115
Dispersion at 1kHz, 4kHz, 8kHz: 130degrees, 90degrees, 180degrees
Color: white or black
Cabinet construction: ABS with Bass reflex
Grill material: steel
IP class: 40
Fixing type: mounting bracket
Height: 358mm
Width: 244mm
Depth: 250mm
Net weight (pair): 12,2Kg
Gross weight (pair): 13,6Kg
Can be mounted with bracket or placed freestanding on a shelf or desk
Included bracket back plate for horizontal mounting | The Electro-Voice ZX1i is the new standard of no compromise audio performance and versatility in an easy to install, compact sound reinforcement package.
The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise.
ZX1i installation is incredibly simple with the included QuickSAM mounting system. The QuickSAM system is a unique, integrated mounting bracket which is virtually foolproof. It allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position. For array mounting, there is an optional array bracket kit available which allows multiple units to be mounted together for a variety of configurations. |
Key Features:
- Compact enclosure
- Dual 205 mm (8 in) LF transducers
- 120° x 60° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm (1 in) exit
compression driver
- Dual Neutrik NL4 connectors plus screw
terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 53 Hz - 20 kHz
Frequency Response (+/-3 dB): 65 Hz - 20 kHz
Horizontal Coverage: 120°
Vertical Coverage: 60°
Directivity Factor (Q): 8.1 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 6.9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 94 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 120 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 375 W / 750 W / 1500 W
AES Standard Power Rating4: 700 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 2 x JBL 228J, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in) edge
wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm
(1.5 in) voice coil
High-Frequency Waveguide: PT-D126HF-1 (field rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M8 rear for OmniMount® 60.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to 5.2
sq mm (10 AGW) wire or max width 9 mm (.375 in) spade lugs.
NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings,
use WRC or WRX.
Dimensions (H x W x D): 679.5 x 238.0 254.0 mm
(26.75 x 9.37 x 10 in)
Weight: 18.6 kg (40.9 lb)
|
F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. White, 8 ohm.
Features:
- Compact box speakers for music and voice paging distribution
- Excellent sound quality
- Octagonal horn design for smooth coverage
- Adjustable high frequency dispersion
- Extruded cabinet design improves low frequency performance
- Individual protection circuit on each component
- Paintable grille and enclosure
- Wall/ceiling-mount bracket included
- Optional board, cluster and pole-mount brackets
- OmniMount-compatible (Series 20.5CA/WA)
- Optional subwoofers, model HB-1, FB-100 or FB-120
- Five year warranty
Specifications:
- LF Driver: 8” cone woofer
- HF Driver: 1” hard-dome tweeter
- Crossover: 2.5kHz
- Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
- Sensitivity (1W, 1m): 93dB SPL
- Dispersion (adjustable):
110° H x 100 ° V
80° H x 80° V
|
The Monitor 88 is the result of extensive research in the development of new transducers and crossover design. The result is a product with exceptional fidelity, the ability to produce deep controlled bass and extended high frequencies without sacrificing efficiency.
The low-frequency 8“driver ʼs low-mass, carbon fiber diaphragm remains extremely rigid at high power levels,producing a more linear response and lower distortion.
The high-frequency section features a constant directivity horn with a built-in mechanical phase equalizer.
The horn is driven by a Ferrofluid® cooled,1“titanium dome tweeter.
All components are housed in a vented enclosure formed from semiexpanded polystyrene foam.
The speaker system is available in black (Monitor 88)or white (Monitor 88W).
| Features |
|---|
| High quality music reproduction | | Transducers LF 8" - HF 1" constant directivity tweeter | | Built-in low inductance passive crossover with high frequency dynamic protection, bass refl ex @65Hz | | Lightweight, UV/weather resistant, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion | | Integrated mounting points for use with optional mounting hardware |
| Acoustical Specifications |
|---|
| Type Of Speaker: | Two-way | | | Frequency Response: | 70 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 120 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 80° | | | Power Handling: | 300 Watt RMS | | | System Sensitivity: | 91 dB | | | Impedance: | 8 Ω | | | Crossover frequencies: | 3 Hz | |
| TRANSDUCERS |
|---|
| Speaker: | 8“ | | | Tweeter: | 1“ | |
| INPUT SECTION |
|---|
| Input connector: | Push type terminal | |
| CABINET |
|---|
| Hardware: | Body in self-extinguishing | | | Colour: | White / Black | | | Grille: | Steel | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 430 / 16.92 | | | Width: | 290 / 11.41 | | | Depth: | 260 / 10.23 | | | Net Weight: | 15 / 33.06 | |
| SHIPPING INFORMATION |
|---|
| Package height: | 535 / 21.06 | | | Package width: | 370 / 14.56 | | | Package depth: | 355 / 13.97 | | | Shipping Weight: | 16.5 / 36.37 |
|
The C4128 is a full range 2 way high sensitivity, dual woofer passive system, compact and versatile specially designed for under balcony applications.
It is designed to provide extended low frequency performance from a compact, vented enclosure. It features advanced technology transducers: two 8" woofers equipped with a 2" voice coil and a 1" neodymium compression driver equipped with a 1.5" voice coil. The compression driver is mounted on a rotatable 90 x 70 constant directivity horn, providing very natural sound reproduction.
The cabinet is asymmetric (15° and 45°) for versatile under balcony applications as well as ceiling/wall installation and floor monitoring operations.
The wide coverage angle and the true constant directivity of the newly designed horn make very easy the coverage of large audiences.
| Features |
|---|
| High efficiency | | 1" neodymium compression driver with 1.5" voice coil | | Asymmetrical cabinet under-balcony/wedge monitor applications | | Active Mosfet Compression Driver Protection | | LICC Crossover | | 90°x 70° CMD (Constant Matching Design) constant directivity rotatable horn | | M10 mounting points |
Applications
- Under Balcony Applications
- Permanent Installations
- Main Reinforcement in small spaces
- Portable Systems AV Presentations
- Zone Delay and Fill Systems
- Stage monitor in multimedia environments, auditoriums house of worship
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 100 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 150 Hz | ÷ 15 kHz | | Max SPL @ 1m: | 122 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 70° | | | Directivity index; Q: | 9.25 | | | System Sensitivity: | 96 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 400 Watt | | | Peak Power Handling: | 1600 Watt | | | Recommended Amplifier: | 800 | | | Protections: | Dynamic | | | Crossover frequencies: | 2100 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1" HF driver , 1.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 109 dB | | | Woofer: | 2 x 8" woofer, 2" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 200 Watts AES | | | Sensitivity: | 94 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 10 mm birch plywood construction | | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 650 / 25.59 mm/inch | | | Width: | 260 / 10.23 mm/inch | | | Depth: | 299 / 11.77 mm/inch | | | Net Weight: | 17.4 / 38.36 Kg/Lbs |
|
Reviews
There are no reviews yet.