Content | 6.5" design two-way loudspeaker black with Clickmount system
The MASK6C low impedance loudspeaker has a unique design and delivers a crystal clear sound for background sound up to dance level music. The cabinet is made of high quality enforced PP4 ABS, with an aluminium grill. The design of the MASK6C ensures high quality and long lasting performance in indoor and outdoor use, even under extreme weather conditions.
The MASK6C has a powerful 6.5” coated paper cone woofer and a 1” silk dome tweeter which results in a high SPL and extremely low distortion. This ensures an unprecedented clarity over the whole frequency spectrum.
The built-in Apart 3-step protection and the high-quality components make the MASK6C an ultra- reliable, fail safe loudspeaker even at high power loads.
Thanks to the revolutionary design of the ClickMount bracket, the MASK6C is without a doubt the fastest and most installer friendly loudspeaker to-date. The pre-defined clicks on the ClickMount ensure a perfect alignment for every loudspeaker. With the discrete cable management system, integrated spirit level and in/out connectors, the full cabling is done on the bracket. To complete the installation simply click the loudspeaker on the ClickMount! |
The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
AC26
Ultra Compact 2-way Loudspeaker with 2 x 6.5” LF
High output, 2-way loudspeaker systems combining flexibility with high fidelity
Features :
1” Exit Compression Driver with 90° x 90° Coverage PT™ Waveguide
165 mm (6.5 in) LF transducer
Ultra compact enclosure
600W Program
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third part OmniMount® type bracket and stand mount accessory
Specifications :
Frequency Range
(-10 dB): 55 Hz -20 kHz
Frequency Response
(±3 dB): 70 Hz -18 kHz
Power Rating: 300W Cont. Pink Noise
600W Program
1200W Peak
Impedance: 8 ohms
Coverage Pattern: 90° x 90°
Dimensions
(H X W X D): 539.8 x 199.4 x 226.1mm
(21.3 x 7.8 x 8.9in)
Weight: 11.0 kg
(24.3 lb)
|
Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
| PRICE PER Pair
EVID 6.2EVID Seri es Twin 6" Surface Mount Speaker System
Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is
perfect for applications that require exemplary audio and the capability to fill large
areas with sound. Additionally, the flexible Strong-Arm-Mount? (SAM?) system
provides the versatility to accommodate any installation challenge. EV's unique 6-
inch dual woofer design delivers crisp and clean program for the utmost in listening
experience regardless of the location. Great for larger areas that demand higher SPL
levels, the 6.2 delivers the outstanding, full bass output required for shopping malls,
stadiums, airports, etc.
Specifications
Max. SPL / 1m (calc); full space 122 dB
System Power Handling (continuous/program/peak) 150/300/600 Watts
Coverage (nominal -6dB) H° 100 °
Coverage (nominal -6dB) V° 80 °
Nominal Impedance 8 Ohms
Minimum Impedance 6 Ohms
Frequency Response (-10dB) 62 - 20000 Hz
Input Connections Spring Terminal
Sensitivity 1W/1m 94 dB
Transformer Taps (Transformer Version Only) 70V/100V:15W, 30W, 60W
Chassis Size 6 inches
Weight Net 5.3 kg ( 11.68 lbs )
Dimensions (HxWxD) 419 x 228 x 298 mm
(16.5" x 8.98" x 11.73“) |
The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
Reviews
There are no reviews yet.