| Content | 4.25" design two-way loudspeaker with Clickmount system
The MASK4CT has a unique design and delivers a crystal clear sound for all music applications. The MASK4CT can be used as a 70V/100V speaker with power tapping on 20 - 10 - 5 - 2.5 watts in 100V or as a low impedance 16 Ohm speaker. This results in a versatile speaker that can be used in any location and any application.
The cabinet is made of high quality enforced PP4 ABS, with an aluminium grill. The design of the MASK4CT ensures high quality and long lasting performance in indoor and outdoor use, even under extreme weather conditions.
The MASK4CT has a powerful 4.25” coated paper cone woofer and a 1” silk dome tweeter which results in a high SPL and extremely low distortion. This ensures an unprecedented clarity over the whole frequency spectrum.
The built-in Apart 3-step protection and the high-quality components make the MASK4CT an ultra- reliable, fail safe loudspeaker even at high power loads.
Thanks to the revolutionary design of the ClickMount bracket, the MASK4CT is without a doubt the fastest and most installer friendly loudspeaker to-date. The pre-defined clicks on the Clickmount ensure a perfect alignment for every loudspeaker. With the discrete cable management system, integrated spirit level and in/out connectors, the full cabling is done on the bracket. To complete the installation simply click the loudspeaker on the ClickMount! |
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white. | The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net colour is off-white, except on the BS-1034S, which comes with a silver net grille.
| Speaker components: |
5" (12cm) cone-type + Balanced dome tweeter. |
| Rated Input: |
100V Line 10W |
| Impedance: |
100V LINE: 1kΩ (10W),2kΩ (5W) 3.3kΩ (3W),10kΩ (1W) |
| Sensitivity: |
(1W 1m)9odB |
| Frequency Responce: |
120-20,000Hz |
| Input Terminal: |
Push-in terminal |
| Finish: |
Cabinet: HIPS resin, off white, paintable.Grill: SECC, metallic paint.BS-1034S is finished silver metallic paint |
|
The BS-678 is a double-cone type speaker with a wooden cabinet that has a stylish, compact and unobtrusive design and that delivers highly cost effective performance. A push-in type input connector allows easy cable connections and bridge wiring. The selectable input impedance can be easily adjusted by changing the tap position
of the unitʼs transformer. 6" (16cm) double cone speaker unit ensures high-quality sound, making the BS-678 ideal for BGM and announcement applications. It can be installed in either a horizontal or a vertical orientation. Its structure permits direct wall installation with screws, making the speaker unit resistant to falling even if outward force is applied to it.
• Stylish, compact and unobtrusive design
• Quick and easy installation
• High cost-effectiveness
• Horizontal / vertical installation
• Ideally suited for BGM and announcements
| BS-678 |
|---|
| Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ(1.5W),13kΩ (0.8W) 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ(0.8W),13kΩ (0.4W) | | Sensitivity | (1W, 1m): 94dB (500 – 5,000Hz, pink noise) | | Frequency Response: | 150 – 20,000Hz (peak –20dB) | | Speaker Component: | 6" (16cm) double cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2(equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Finish: Baffle: | HIPS resin, off-white (RAL 9010 or equivalent colour) | | Cabinet: | Particle board with pvc sheet, off-white(RAL 9010 or equivalent colour) | | Grille: | Surface-treated steel plate net, off-white(RAL 9010 or equivalent colour) | | Dimensions: | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“) | | Weight: | 1.7kg (3.75 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) × 2 |
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.
| BS-634 |
|
|---|
| Speaker Component: | 5" (12cm) Cone-type | | Impedance: | 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W), | | Sensitivity: | (1w 1m) 90dB | | Frequency Responce: | 120 -20,000Hz | | Input Terminal: | Push-in terminal | | Finish: | Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable | | Dimensions: | 320(W)x200(H)x85(D)mm |
|
Reviews
There are no reviews yet.