Content |
Hera, will not only log the average and peak RMS sound level pressure over a time period, but Hera will also detect and log the attempts of system tampering (for example disconnection of the microphone). The logs can be easily consulted by any user directly from the front panel or retrieved on a computer and printed out.
Hera also offers two logic outputs that may be used to control external devices or mains cut-off if a certain threshold is being exceeded. This threshold value may be scheduled to allow for different sound levels at set times.
All settings are pin code protected and can easily be set from the devicesʼ front panel.
Apex Hera is delivered with a measurement microphone and this is factory calibrated for perfect accuracy.
Hera also offers an automatic calibration function for remote microphone distance compensation. This is imperative in most venues, since the measurement microphones should be placed out of reach.
Optionally you can connect the Apex Leto large deported display to the Hera so that the audience, band or DJ may have visual sight on the sound pressure levels at any time.
The Hera may be used together with the Apex Argos. The Argos will then be slaved onto the Hera's measurement and threshold.
Use the Hera together with the Apex Argos, they will be your neighbours dream team !
Application
Directive 2003/10/EC "Noise at work“
fixed installation: bar, theatre, concert venue, ...
on the road: mobile DJ, live concert, ...
Features
Key features
stand-alone warning and cut-off microprocessor-based controller
factory calibrated for accurate measurement
all settings may be made from the front panel and are password protected
average and peak RMS sound level logging over an user adjustable time
system tamper detection and logging
easy computer log read-out through standard serial port (without having to switch off the device)
two separated logic outputs for controlling external devices and mains power cut relays, all set / reset times adjustable
use in combination with Argos for the ultimate in sound level monitoring and management
General features
14-days sound level log (if registered every 15 minutes)
possibility to schedule different threshold per day and weekdays
optional remote large level display
Specifications
Input / Output
- Measurment microphone input
- Interconnection to Argos
- RS-232 for memory read-out from a computer
- Output to Leto deported display
Measuring
- Range 55dB-120dB
- "A" filter accurancy 27Hz-20kHz: +/- 1,2dB
Relay Outputs
- Connections: GND, OUT1, OUT2, +12V
- Current limiting on each output
- Relay absence detection
General
- Dimensions 19 inch / 1 HU
- Supply voltage 90-230 Vac
- Shipping weight 2,35 kg
|
Providing 48-bit filter algorithms, 24-bit AD/DA conversion and a dynamic range of 115 dB, the DSP 244 sets new standards for digital loudspeaker controllers and processors. The DSP 244 is an universal Digital Sound System Processor that provides 2 inputs and 4 outputs; plus internal summing of the inputs 1 and 2. Via matrix it is possible to assign the outputs to any input or to the sum of the inputs. It is further possible to establish the following configurations: Stereo or Dual 2-Way systems, 3-Way + Direct and 4-Way systems, each with Mono Subchannel, but also full range systems. High and low-pass filters are provided for the frequency crossover functions in all operation modes. The selection includes Linkwitz-Riley, Butterworth and Bessel type filters with switchable slopes between 6, 12, 18 and 24 dB/oct. A huge number of additional filters offers extremely flexible correction of the frequency response. Each input incorporates a 5-band equalizer, allowing to assign high and low-pass, high and low-shelving or parametric peak-dip filters to its individual filter sections. Next to the frequency crossover filters, four additional filters are employed in each output channel, which also can be set to work as high or low-pass, high or low-shelving filters, parametric peak-dip filters, or all-pass filters. Additional filtering is provided through 2. order high-passes for the realization of B-6 alignment, or special LPN-filters (Low-Pass Notch filters) for correcting the frequency and phase responses of optimally vented woofer cabinets. Each channel additionally provides a delay, a polarity switch, a programmable level control and a digital compressor / limiter while the master delays are located in the input channels. Datasheets / ManualsBrochure (309KB)
Mains voltage 90 - 250 V AC / 50 - 60 Hz Power consumption 20 watts Safety class I Inputs 2 x XLR IN, electronically balanced, transformer optional available 2 x XLR OUT (Direct Out) Input voltage (nominal) 1.55 V / + 6 dBu Max. input voltage 24.5 V / + 30 dBu Input impedance 20 kohms Common mode rejection > 40 dB AD-conversion 24-bit, Sigma-Delta, 128 times oversampling, linear phase Outputs 4 x XLR OUT, electronically balanced Output voltage (nominal) 1.55 V / + 6 dBu Max. output voltage 8.7 V / + 21 dBu Output impedance | Advanced Feedback Suppression Processor with Full LCD Display
The AFS2 Dual-Channel Advanced Feedback Suppression Processor from DBX protects your ears and audio equipment from annoying and potentially damaging audio feedback without altering your sound. The AFS2 features application-specific filter types for speech, music low, music medium, and music high. The 24 fixed or live narrow-band notch filters are capable of removing frequencies at 1/80 of an octave, ensuring an optimal frequency response without the possibility of feedback.
The front panel features the wizard function to take the guesswork out of setting up any room by incorporating an advanced feedback suppression module and providing a full LCD display for system settings and menus. Additionally, the AFS2 offers a five-segment LED for accurately monitoring input levels for each channel, while the notch filter indicator allows you to monitor the number of filters applied. Dedicated bypass buttons are included to help isolate problem channels. The rear panel offers XLR and 1/4" inputs and outputs, both switchable between +4 and -10 dB operations. A USB port has been provided for firmware updates. The AFS2 ships with a standard IEC power cable.
Number of Channels |
2 |
Inputs |
Connectors: Female XLR and 1/4" TRS
Type: Electronically balanced and unbalanced, RF filtered
Impedance: Balanced 50 kohm, unbalanced 25 kohm
Max Line Level: +20 dBu |
Input CMRR |
>40 dB, typically >55dB @ 1 kHz |
Outputs |
Connectors: Male XLR and 1/4" TRS
Type: Electronically balanced and unbalanced, RF filtered
Impedance: Balanced >120 ohms, unbalanced >60 ohms
Max Level: +20 dBu |
A/D/A Converter |
A/D Converter: DBX type IV conversion system
A/D Dynamic Range: >113 dB A-weighted, >110 dB, unweighted, 22 kHz BW
Type IV Dynamic Range: >119 dB, A-weighted, 22 kHz BW; >117 dB, unweighted, 22 kHz BW
A/D Conversion: 24-bit
Sample Rate: 48 kHz
D/A Dynamic Range: 112 dB A-weighted, 109 dB unweighted
D/A Conversion: 24-bit |
Dynamic Range |
109 dB A-weighted, 106 dB unweighted, 22 kHz BW |
THD + Noise |
0.003% typical at +4 dBu, 1 kHz |
Frequency Response |
20 Hz to 20 kHz, ±0.5dB |
Crosstalk |
Interchannel Crosstalk: >80 dB typical
Crosstalk Input to Output: >80 dB |
Power |
US: 100 to 120 VAC 60 Hz
EU: 220 to 240 VAC 50 Hz
9 W |
Dimensions (HxDxW) |
1.8 x 5.8 x 19.0" / 4.4 x 14.6 x 48.3 cm |
Weight |
4.5 lb / 2.0 kg |
|
Power supply: |
100-240 V AC, 50/60 Hz
6 V DC 800 mA |
Power connection: |
Mains input via Coaxial power connector (M) mounting version power supply cord with AC adapter (provided) |
Frequency range: |
10 - 30000 Hz |
THD: |
<0,005 % at 1 kHz |
DSP: |
Digital signal processor |
Impedance: |
Input: 10 kOhm
Output: 50 Ohm |
Gain: |
Output: -50 dB to +12 dB |
Filter: |
Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct |
Delay: |
0 - 5 ms |
Dynamic range: |
Input: 114 dB
Output: 110 dB |
Sample rate: |
67 kHz |
Connections: |
Input: line via 2 x 3-pin XLR
Output: line via 6 x 3-pin XLR |
Crossover frequency: |
20-20000 Hz |
Max. level: |
Input: +22 dBu
Output: +9 dBu |
USB port: |
Typ B |
PC connect: |
DXO Software via USB, firmware can be updated |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimensions: |
Width: 48,3 cm
Depth: 12,8 cm
Height: 4,45 cm |
Weight: |
1,77 kg |
Operating system: |
Win XP, Win Vista, Win 7, Win 10, OS X 10,5 or better |
|
With 6 inputs and 4 outputs the dbx ZonePro? 640 and 641 provide flexible signal routing,
powerful DSP processing and multiple control interfaces for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the
highest quality tools available. Even the input and outputs connectors were chosen for their
standard usage and reliability. The ZonePro products offer Euroblock connectors for balanced
signals and RCA connectors for interfacing with consumer equipment often used in commercial
applications; there is also a simple analog input buss that allows inputs to be sent from one
unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing
tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated
and specific functions such as selectable paging microphone processing including Gating,
De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the
ZonePro products is the Routing module that provides of course Primary Source Selection
but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of
processing designed for commercial applications like our patent-pending AutoWarmth? function
that was co-developed with JBL to provide natural low frequency extension at any signal level.
Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system
optimization. With the ZonePro? every tool is at your disposal to maximize the response of
your system.
Beyond processing, the ZonePro? products offer multiple forms of control to further extend the
versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user
functions like source select and volume control to advanced system control including a built-in
Real Time Clock that can provide programmable system changes throughout the day or week.
For system setup and monitoring the ZonePro Designer software provides an intuitive interface
and a speedy setup Wizard for configuring and editing all system parameters.
The ZonePro? 640 and 641 will take your Commercial Audio system to the next level with advanced
processing, versatility and control.
? Advanced Feedback Suppression (AFS?)
? Autowarmth?
? Auto Gain Control
? Compression
? Limiting
? Noise Gating
? Notch Filtering
? Bandpass and Crossover Filters
? Parametric EQ
? Security Lockout
? Wall Panel Control
? RS-232 Control
? Windows? 2000 and XP GUI
? IEC, UL and CSA Approvals
|
The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbxʼs proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation. |
Reviews
There are no reviews yet.