APOGEE AO16 card with 16 Analog Out + 16 Optical IN Signal Converter

1,914.44 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
ADC     Not applicable DAC     24-bit Sample Rates     Up to 192kHz Analog In     Not applicable Input Impedance     Not applicable Maximum Input Level     Not applicable Analog Outputs     2 x 25-pin D-Sub (requires optional breakout cable) Output Impedance     25Ω Maximum Output Level     ∞ to +24dBu Digital Input Connectors 1 […]

 

Read more

ADC     Not applicable
DAC     24-bit
Sample Rates     Up to 192kHz
Analog In     Not applicable
Input Impedance     Not applicable
Maximum Input Level     Not applicable
Analog Outputs     2 x 25-pin D-Sub (requires optional breakout cable)
Output Impedance     25Ω
Maximum Output Level     ∞ to +24dBu
Digital Input Connectors
1
    4 x TOSlink optical ADAT, ADAT SMUX or S/PDIF
1 x RCA coaxial S/PDIF
Digital Output Connectors     1 x RCA coaxial S/PDIF
Dynamic Range     129dB, A-weighted
THD + N     -117dB @ 20dBu (0.00014%)
Frequency Response     DC to 20kHz (+/-0.05dB)@ 44.1kHz
Word Clock     On chassis
Power Requirements     From chassis
Dimensions (WxDxH)     Fits slot on chassis

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “APOGEE AO16 card with 16 Analog Out + 16 Optical IN Signal Converter”

Your email address will not be published. Required fields are marked *

Quick Comparison

APOGEE AO16 card with 16 Analog Out + 16 Optical IN Signal Converter removeYAMAHA Audiogram 3 USB Audio Interface removeMOTU 8 Pre USB - 16 x 12 FireWire audio interface removeDIGIDESIGN Pro Tools Mbox USB AUDIO INTERFACE 4X4 removeEDIROL UA-20 USB AUDIO AND MIDI removeMOTU HD192 remove
NameAPOGEE AO16 card with 16 Analog Out + 16 Optical IN Signal Converter removeYAMAHA Audiogram 3 USB Audio Interface removeMOTU 8 Pre USB - 16 x 12 FireWire audio interface removeDIGIDESIGN Pro Tools Mbox USB AUDIO INTERFACE 4X4 removeEDIROL UA-20 USB AUDIO AND MIDI removeMOTU HD192 remove
Image
SKUAI16J080.000208preProTools MboxUA-20HD192
Rating
Price 1,914.44 incl. GR VAT 89.73 incl. GR VAT671.40 incl. GR VAT 583.29 incl. GR VAT 159.06 incl. GR VAT1,592.83 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

ADC     Not applicable
DAC     24-bit
Sample Rates     Up to 192kHz
Analog In     Not applicable
Input Impedance     Not applicable
Maximum Input Level     Not applicable
Analog Outputs     2 x 25-pin D-Sub (requires optional breakout cable)
Output Impedance     25Ω
Maximum Output Level     ∞ to +24dBu
Digital Input Connectors
1
    4 x TOSlink optical ADAT, ADAT SMUX or S/PDIF
1 x RCA coaxial S/PDIF
Digital Output Connectors     1 x RCA coaxial S/PDIF
Dynamic Range     129dB, A-weighted
THD + N     -117dB @ 20dBu (0.00014%)
Frequency Response     DC to 20kHz (+/-0.05dB)@ 44.1kHz
Word Clock     On chassis
Power Requirements     From chassis
Dimensions (WxDxH)     Fits slot on chassis

Yamaha AUDIOGRAM3 Computer Recording System Specifications:

  • Mic/Hi-Z input: 1
  • Audio Format: USB AUDIO 1.1, 16bit/44.1kHz
  • Combo Connectors: 1
  • Stereo In connectors: Phone connector x 2 (L/MONO x 2, R x 2)
  • USB Connector: To Host x 1
  • Headphone connector: Stereo Phone connector x 1
  • Stereo Out connector: Phone connector x 2 (L, R)
  • Power Supply: USB powered
  • Dimensions (W x H x D): 180 mm x 61 mm x 112 mm (7-1/8" x 2-3/8" x 4-3/8“)
  • Accessories: CUBASE AI DVD, Owner's Manual, USB Cable

    System Requirements
  • Windows Vista
  • Windows-based computer with built-in USB interface
  • OS: Windows Vista
  • CPU: 1GHz or better Intel Core / Pentium / Celeron processor
  • Memory: More than 1GB

    Windows XP
  • Windows-based computer with built-in USB interface
  • OS: Windows XP Professional / XP Home Edition
  • CPU: 750MHz or better Intel Core / Pentium / Celeron processor
  • Memory: More than 128MB

    Macintosh
  • Macintosh computer with built-in USB interface
  • OS: Mac OS X 10.3.3 or higher
  • CPU: Intel CPU / Macintosh G3 processor 300 MHz or better
  • Memory: More than 128MB

    Cubase AI4 System Requirements:

  • Windows
  • OS: Windows XP Professional SP1 / XP Home Edition SP1 / Windows Vista (32-bit)
  • CPU: Intel Pentium 1.4GHz or better
  • Available Memory: More than 512MB
  • Hard Disk: Free disk space of 1GB or more
  • Audio Interface: Windows DirectX / ASIO compatible

    Macintosh
  • OS: Mac OS X 10.4 or higher
  • CPU: Power Mac G4 1GHz or Core Solo 1.5GHz or better
  • Available Memory: More than 512MB
  • Hard Disk: Free disk space of 1GB or more

Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.

The 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8pres or other MOTU FireWire audio interfaces.

The 8pre as your primary audio interface

Use the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8preʼs main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.

The 8pre includes a 16-channel MIDI interface. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.

The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

The 8pre as a microphone preamp expansion interface

The 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical "lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD or Traveler, the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.

If you have a 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.

Mbox® is a premium audio interface, packing a wide range of analog and digital I/O connections into a mobile form factor.

* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* Bus-powered USB 2.0 connection for maximum mobility
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 96 kHz sample rates
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Hardware configuration:
o 4 x 4 simultaneous channels of I/O
o 2 XLR mic/line combo inputs with 48 V phantom power
o 2 1/4” DI inputs on front panel for easy access
o 2 balanced 1/4” monitor outputs
o 1 1/4” stereo headphone output with volume control
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Monitor control section with Mono and Dim controls
o Dedicated monitor volume knob

Pro Tools LE Software
Pro Tools 8 Software

The Pro Tools® software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.

Key Features

* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers

System Requirements
Mac PC

* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One USB port



* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One USB port

Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers


UA-20: Audio Capture USB Audio/MIDI Interface Features

The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.

  • Audio and MIDI in a compact unit.
  • Fully equipped with I/O jacks.
  • Great tool for creating music.
  • Edirol's FPT Technology.

Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.

 

Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.

The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.

The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.

Weight0.50 kg2.00 kg4.00 kg2.00 kg0.60 kg5.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 2.00 kg
Weight 4.00 kg
Weight 2.00 kg
Weight 0.60 kg
Weight 5.50 kg