ARCAM Son LINK Digital-Analog Converter

No longer available!

231.87 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Arcam believe that it shouldn’t matter which source you choose for your digital music the signal should be handled with the utmost care. This philosophy creates a musical performance that’s as close as possible to the original recording. The new Arcam SonLink uses the Arcam rLink DAC housed in a custom built enclosure with internal […]

 

Read more

Arcam believe that it shouldn’t matter which source you choose for your digital music the signal should be handled with the utmost care. This philosophy creates a musical performance that’s as close as possible to the original recording. The new Arcam SonLink uses the Arcam rLink DAC housed in a custom built enclosure with internal wiring. It delivers the perfect audio upgrade for the market leading Sonos Connect or ZP90 Zoneplayer products.

 

Technical Specifications

  • DAC: TI PCM5102
  • Frequency response: 10Hz — 20kHz, ±0.1dB
  • Total Harmonic Distortion + Noise: 0.002%
  • Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
  • Line output level: 2.15Vrms
  • Supported sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz
  • Bit depth support: 16-bit, 24-bit
  • Power requirements: 0.7W max (PSU supplied)

 

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “ARCAM Son LINK Digital-Analog Converter”

Your email address will not be published. Required fields are marked *

Quick Comparison

ARCAM Son LINK Digital-Analog Converter removeAUDIOENGINE D3 Portable USB audio converter (digital-toanalog converter) removeFOSTEX HP-A3 32-bit D/A Converter removeRME ADI-2 Convertor AD/DA removePro-Ject Audio Record box E MM-MC USB PHONO RIAA PREAMPLIFIER White removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver Black remove
NameARCAM Son LINK Digital-Analog Converter removeAUDIOENGINE D3 Portable USB audio converter (digital-toanalog converter) removeFOSTEX HP-A3 32-bit D/A Converter removeRME ADI-2 Convertor AD/DA removePro-Ject Audio Record box E MM-MC USB PHONO RIAA PREAMPLIFIER White removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver Black remove
Imageproject audio record box e usb mm mc riaa preamplifier phono whitepro-ject-audio-bluetooth-receiver-box-e
SKUSonLINKD3HP-A3J30RM00012Record Box E-WBT BOX E
Rating
Price231.87 incl. GR VAT 94.00 incl. GR VAT 290.00 incl. GR VAT 665.00 incl. GR VAT125.00 incl. GR VAT139.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Amplification and RIAA equalisation for MM & MC
  • Design principle inspired by Dr. Sykora
  • Digitalisation of vinyl for recording direct to USB with suitable recording programs
  • Automatic recognition, no additional drivers needed
  • Runs on Windows®, Mac OS® & Linux operating systems
  • SMD circuitry with special low noise components
  • Internal metal shielding
  • Small size allows installation close to record player
  • Gold plated RCA connection sockets
  • Outboard power supply included
  • Black or White casing
  • Wireless music streaming with almost CD-quality
  • BT 2.1 + EDR
  • Supports aptX & SBC codecs
  • Easy to install and use
  • Fast auto pairing (3 to 5 seconds)
  • Up to 8 different BT sources are memorized
  • Works within a range of approximately 10 meters
  • RCA analogue and Toslink digital outputs (switchable)
  • Outboard power supply included
  • Black or White casing
Content

Arcam believe that it shouldn't matter which source you choose for your digital music the signal should be handled with the utmost care. This philosophy creates a musical performance that's as close as possible to the original recording. The new Arcam SonLink uses the Arcam rLink DAC housed in a custom built enclosure with internal wiring. It delivers the perfect audio upgrade for the market leading Sonos Connect or ZP90 Zoneplayer products.

 

Technical Specifications
  • DAC: TI PCM5102
  • Frequency response: 10Hz — 20kHz, ±0.1dB
  • Total Harmonic Distortion + Noise: 0.002%
  • Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
  • Line output level: 2.15Vrms
  • Supported sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz
  • Bit depth support: 16-bit, 24-bit
  • Power requirements: 0.7W max (PSU supplied)

 

The Audioengine D3 Premium 24-bit DAC (digital-toanalog converter) allows you to bypass your computer's headphone output and send music directly through a USB port for noticeably improved fidelity and a higher output. Portable USB audio converter for Mac or PC Stream bit-perfect native 24/96 HD audio High-performance headphone amp included Plug-and-play, no drivers or software to install Connect headphones or any music system Easily drives low impedance headphones Computer OS volume control Asynchronous data transfer with dual master clocks HD indicator for sample rates above 48K Metal injection molded (MIM) aluminum case

The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.

Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?

 

  • 32bit D/A Converter
  • USB Bus power without using unwanted AC adapter
  • Works with up to 24bit/96kHz audio source
  • High quality analog headphone amp to drive any type of headphones
  • Equipped with high-grade AKM 32bit DAC AK4390
    • USB Bus power without using unwanted AC adapter
    • Works with up to 24bit/96kHz audio source
    • Exclusive PLL power supply is built in to reproduce the stable electrical supply
    • High quality analog headphone amp to drive any type of headphones
    • Equipped with hgih-grade AKM 32bit(*) DAC AK4390
    • Condensers and OP amp designed exclusively for audio products
    • USB / Digital (Optical) input selector
    • Headphones / RCA (Analog) output selector
    • Doubles as D/D converter from USB digital audio to Optical
    • An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter

    Note: When using the USB input, the sampling frequency is fixed at 96kHz.  Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.

    Input
    USB port sampling frequency 16bit-24bit/96kHz
    Interface: USB full speed
    Digital Connector: optical, square
    Format: S/PDIF (32kHz - 96kHz)

    Output
    Phones Connector: Stereo phone
    Max Output: 100mW (32-ohm loaded)
    THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
    Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
    Analog Connector: RCA Pin
    Reference output level -10dBV
    THD: less than 0.01% at 1kHz
    Frequency response: 20Hz / 20kHz +-0.3dB
    Digital Connector: Optical, square
    Format S/PDIF (32kHz - 96kHz)

    General
    Power: DC5V (via USB port)
    Power Consumption: 2.5W
    Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
    Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
    Weight: approx. 450g

     


    The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied.

    Phono preamplifier with A/D converter and USB output

    Record Box E: Pure vinyl listening pleasure plus recording functionality!
    Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
    • Amplification and RIAA equalisation for MM & MC
    • Design principle inspired by Dr. Sykora
    • Digitalisation of vinyl for recording direct to USB with suitable recording programs
    • Automatic recognition, no additional drivers needed
    • Runs on Windows®, Mac OS® & Linux operating systems
    • SMD circuitry with special low noise components
    • Internal metal shielding
    • Small size allows installation close to record player
    • Gold plated RCA connection sockets
    • Outboard power supply included
    • Black or White casing
    Input capacitance/input impedance MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC)
    Gain, MM / MC 40 dB / 60 dB
    Output voltage typically 300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC)
    Max. output 9,5 V (1 kHz)
    Noise floor MM / MC 94 dB (A weighted) / 75 dB (A weighted)
    THD MM / MC <0,01% / <0,05%
    RIAA-equalisation curve accuracy 20 Hz - 20 kHz / max. 0.5 dB
    A/D converter Burr Brown PCM2904 16-Bit Delta Sigma
    Sampling rates 32, 44,1 and 48 kHz
    USB output 5 pin Mini b Buchse
    USB signal digital serial data protocol USB 1.1
    Operating systems Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux
    Input / Line output 1 pair RCA/Cinch sockets each
    Outboard power supply 18 V / 500 mA DC, suitable for your country's mains supply
    Power consumption 100 mA DC
    Dimensions W x H x D (D with sockets) 120 x 32 x 100 (115) mm
    Weight 250g without power supply

    Bluetooth Receiver

    • Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
    Technical specifications Pro-Ject BT Box E
    Effective range of wireless signal up to 10m in case of direct visibility
    Line-level output: 1 x RCA/Cinch
    Output voltage: 2Vrms
    Digital outputs: 1 x optical (TOSlink®)
    BT version: 2.1 + EDR
    Supported codecs: aptX, SBC, A2DP BT profile
    Frequency: 2402 ~ 2480 MHz
    Sensitivity: - 84dBm
    Maximum TX power +4dBm
    Outboard power supply: 9V/300mA DC
    Power consumption: 100mA/9V DC,<1W in standby
    Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
    Weight: 250g without power supply
    Weight2.00 kg0.50 kg0.50 kg3.00 kg350 kg300 kg
    DimensionsN/AN/AN/AN/AN/A12 × 3.2 × 10 cm
    Additional information
    Weight 2.00 kg
    Weight 0.50 kg
    Weight 0.50 kg
    Weight 3.00 kg
    Weight 350 kg
    Weight 300 kg
    Dimensions 12 × 3.2 × 10 cm