Content |
Archon - A new generation of improved speakers for modern indoor spaces
The Archon series of full-range and bi-amped speaker systems have been designed to provide ample bandwidth and high SPL for an accurate sound reproduction in the most various application projects.
With the Archon series FBT wants to meet today’s expectations of the installed sound market: a new generation of improved speakers responding to high quality sound requirements for modern indoor spaces.
The FBT Archon series lines up three 2-way full range/bi-amp models and three 2-way full range compact models; in addition, two low-profile subwoofers (2x8” and 2x15”) increase the low frequency extension of the desired systems. All Archon speakers are elegantly designed and crafted to meet the most demanding architectural design.
The FBT Archon series has been engineered to fulfill the need of high quality sound in bars, pubs, restaurants, retail shops, clubs, entertainment venues, fitness centers, conference rooms, theatres, educational institutions, houses of worship, museums, exhibition centers, cruise ships, corporate A/V, granting excellent speech intelligibility, wide and precise band coverage, ease of installation thanks to the flexible mounting hardware.
- 1 x 10” (2.5” VC) B&C custom made high excursion LF woofer
- 1 x 1” (1.7” VC) B& C custom made HF compression driver
- 1 x 1” FBT rotatable 80° x 50° constant directivity horn
- 2-way, passive sound reinforcement systems
- 15mm (0.6”) baltic birch plywood cabinets
- B&C custom designed high excursion LF woofers
- B&C custom designed HF compression drivers
- Full range / bi-amp crossover networks with protection
- 2 x Neutrik NL-4 speakon connectors
- 1 x 4 Euroblock terminal speaker connector
- 12 x M10 threaded rigging points
- 2 x metal flange threads for U bracket wall mount
- Acoustically transparent steel grille and antidust protection cloth
- Rear pocket handle to ease lifting and installation of the cabinet
- 35mm (1. 3/8”) top hat for speaker stand
- New FBT rotatable logo badge following vertical or horizontal installation
- Optional mounting hardware
- Optional line transformer 200W
Code: |
36329 |
Configuration: |
2 way |
Recommended amplifier: |
700 W RMS |
Long Term power: |
350 W |
Short term power: |
1400 W |
Transformer: |
100/200 optional V |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2.5 coil inch |
AES power: |
300 W |
High frequency driver: |
1 - 1.7 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
125/129 dB |
Dispersion: |
80°x50° HxV |
Crossover Frequency: |
1.8 passive or active Bi-Amp KHz |
Recommended HP filter: |
45hz - 24dboct |
Recommended external filter: |
Digital Management with presents |
Input connector: |
2 x Speakon NL 4 in & thru 4 x Euroblock |
Net Dimension (WxHxD): |
320x550x325 - 12.59x21.65x12.79 mm/inch |
Net Weight: |
15/33 kg/lb |
Transport Dimension (WxHxD): |
420x650x420 - 16.53x25.59x16.53 mm/inch |
Transport Weight: |
17 / 37.4 kg/lb |
|
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
- 2-way, bass reflex design
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- ORIGINAL / LIVE The renowned, smooth FBT sound
- VOCAL A special EQ setting to maximise speech intelligibility
- DJ Designed to keep the energy high and your audience dancing
- TOURING The reliability and the roar of the industry’s most popular touring systems
- LOUDNESS The ultimate preset for listening at a medium or low volume
- WARM A special setting to emphasise full-bodied, low-mid frequencies.
Code: |
40682 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
80° x 50° rotatable HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
HP 50Hz - 12-24dB/oct |
Input connector: |
2 x SPEAKON |
Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
Net Weight: |
15.1/33.28 kg/lb |
Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
Transport Weight: |
17.6/38.80 kg/lb |
|
M1001 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M1001 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M1001 wall or ceiling mounted, with reference to the several possible applications. The M1001 has a controlled dispersion and delivers undistorted SPL value above any expectation from such a compact speaker system. The M1001 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded on a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.
General Specs
High Quality 2-way passive loudspeaker 1 x 10" woofer, vented 1 x 1" driver, on 90°x60° CD horn High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver 300W AES power handling Steel Front Grille with robust double mesh polyester clothing Rotatable RCF front logo Installation points are available on the rear panel, top and bottom All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:60 Hz ÷ 20000 Hz Max SPL @ 1m:128 dB Horizontal coverage angle:90° Vertical coverage angle:60° Directivity index; Q:10 System Sensitivity:97 dB Nominal Impedance:8 Ω Power Handling:300 W Peak Power Handling:1200 W Recommended Amplifier:600 W Protections:Dynamic Crossover frequencies:1700 Hz
Inputs/Outputs
Input connector:4-pin EUROBLOCK Height:500 / 19.68 mm/inch Width:265/ 10.43 mm/inch Depth:320 / 12.60 mm/inch Net Weight:13.2 / 29.08 kg/lbs |
Made for permanent sound placement.
The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES
10″ 2-way low-profile installation loudspeaker
10″ high-output ceramic woofer with 2″ voice coil for maximum output
1.4″ titanium compression driver provides smooth, consistent high-frequency response
8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
Rotatable center logo allows for clean presentation in all configurations
Convenient terminal strip connectivity saves time and cost
Dual Neutrik parallel connectors
Lightweight, compact and durable 15mm poplar cabinet construction
SPECIFICATIONS
iP-10 10" 2-Way Passive Loudspeaker
Frequency range (-10 dB): 50 Hz - 20 kHz
Coverage pattern: 90° x 50°
Power handling: 200 watts continuous / 400 watts program
Max SPL: 124 dB
Crossover frequency: 3 kHz
Nominal impedance: 8Ω
Height: 20.5 in / 520 mm
Width (Front): 12 in / 310 mm
Width (Rear): 6.8 in / 172 mm
Depth: 13.4 in / 340 mm
Product weight: 26 lb. / 11.8 kg |
- Sealed type speaker with 60W continuous pink noise and 180W continuous program power handling capacity.
- Highly efficient operation at rated sound pressure level of 96dB (1W, 1m).
- Frequency response of 100Hz~20,000Hz and 2.5kHz passive network crossover frequency.
- Two-way coaxial unit with 25cm low- frequency cone speaker and high- frequency CD horn fitted with compression driver (60º horizontal × 60º vertical).
- 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications.
- Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille.
- Speaker mounting brackets and speaker mounting bolts included.
- Optional matching MT-S0601 transformer.
Spec. | Enclosure | Sealed type | Power Handling Capacity | Continuous Pink Noise: 60W/Continuous Program: 180W | Rated Impedance | 8 ohms | Sound Pressure Level | 96dB (1W, 1m) | Frequency Response | 100 - 20,000Hz | Crossover Frequency | 2.5kHz (passive network) | Speaker Component | 2-way coaxial unit/Low Frequency; 25cm cone speaker
High Frequency; CD horn fitted with compression driver (60º horizontal × 60º vertical) | Input Terminal | 2-pole M5 screw terminal, pitch between barriers; 12.2mm | Finish | Enclosure; Coniferous plywood, black, semi-mat, urethane paint
Grille; Steel plate, black, semi-mat, acryl paint | Dimensions (W × H × D) | 460 × 310 × 200mm | Weight | Speaker System; 9kg
Mounting Bracket; 2kg | Accessories | Speaker mounting bracket × 2
Speaker mounting bolt × 4 | |
The C3110 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.
Its compact size makes it ideal for low visibility side wall mounting.The high-frequency section is a constant directivity horn loaded to a 1” Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 10” woofer with a 2” voice coil.
Features |
---|
90° x 70° CMD (Constant Matching Design) constant directivity horn | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network | 4 Suspension points (M10) | 35 mm standard internal pole mount |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 59 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 70 Hz | ÷ 20 kHz | Max SPL @ 1m: | 127 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 70° | | Directivity index; Q: | 9.4 | | System Sensitivity: | 96 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 300 Watt | | Peak Power Handling: | 1200 Watt | | Recommended Amplifier: | 600 | | Protections: | Dynamic | | Crossover frequencies: | 1800 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HF driver, 1.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Woofer: | 10" woofer, 2" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 250 Watts AES | | Sensitivity: | 96 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | Handles: | 1on back | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 300 / 11.81 mm/inch | | Depth: | 287 / 11.30 mm/inch | | Net Weight: | 13 / 28.66 Kg/Lbs |
|
Reviews
There are no reviews yet.