Content | WASH: 7pcs. x10W RGBW 4-in-1 LEDs
This new compact LED MOVING HEAD 7x10W RGBW, mini moving head uses a powerful 7 LED. It has a 25° beam angle and features and it has power consumption 80W. It can be operated by 9 or 14 Channel DMX or one of the stage friendly internal programs on either auto or sound to light mode. It can be free standing or mounted to trussing using the supplied brackets. It is ideal for uses such as small stages, bars,nightclubs, mobile DJs and bands.
-------- TECHNICAL DATA --------
|
|
Power consumption |
80W |
Power supply voltage |
90 - 230V |
Voltage frequency |
50/60Hz |
Diode type |
4in1 |
Number of diodes |
7 |
Diode power |
10W |
Display |
LED - 4 characters |
-------- UTILITY DATA -------- |
|
Color |
RGBW |
ZOOM |
No |
Beam angle (min) |
25° |
Beam angle (max) |
25° |
Dimming |
Linear: 0 - 100% |
Flash frequency (min) |
0Hz |
Flash frequency (max) |
10Hz |
FROST filter |
No |
FOCUS |
No |
PAN range |
540° |
TILT range |
270° |
Number of DMX channels |
9 / 14 |
DMX standard |
DMX 512 |
Control interface |
4 buttons |
Operating modes |
DMX, Master/Slave, Sound controlled |
-------- INTERFACES -------- |
|
AC IN |
IEC - C14 |
DMX IN |
XLR - 3 pin |
DMX OUT |
XLR - 3 pin |
----- PHYSICAL CHARACTERISTICS ----- |
|
IP Rating |
IP20 |
Housing made |
ABS |
Cooling |
Active |
Weight with packaging [kg] |
3,6 |
RGBW COLOUR MIXING
Beam Angle: 15o ZOOM
Strobe: 1-20fps
Dimmer: DMX controlled Dimmer 0-100%
Movement: 540o PAN - 270o TILT
LED Display for MENU settings
Input signal: DMX 512/12 Channels
Automatic on board programms
Voltage: 115-240V AC
Colour: Black
Dimensions: 180x170x260mm
Weight: 3.8kg |
LED Cube 30 cm.
Decorative light-emitting LED Cube
The LED Cube has 81 built-in LEDs. Due to the high number of LEDs used, the light is spread equally, thus creating an astonishing effect. It can be easily mounted with the hook on top of the unit. You can also put it on any surface. The LED Cube can also be used outdoor (IP-66) and can be controlled by its controller (41140).
Technical Info
Total LEDs: 81 (27 red, 36 green, 18 blue)
Protection rating: IP-66
Power Supply: 24V (by controller: 41140)
Power Consumption: 12W
Dimensions: 30x30x30 cm (LxWxH)
Weight: 2,6 Kg | DAP AUDIO D8560 professional stand for larger bench mixers, equipped with weels. Its pratical shape, simplifies mobility and gives more stability when placed on the ground. Made of steel painted in black.
Technical Info
Weight (net): 22.5kg
Weight (gross): 23 kg
Height: 85 cm
Usefull Depth: 1265 mm
Maximum Carriage Capacity (Load) : 250 Kg
Dimensions: 1370x865x865mm (LxWxH) | Installer version of the Mobile 8, for wall or ceiling mount. Rec. amp power (non clipping): up to 300W RMS / 8ohms (electronically high pass filtered 24dB/oct at 200 Hz or higher) Peak SPL: 120dB Impedance: 6 ohms Dimensions: 49,2 x 59,2 x 5,5 cm; frame 1,5 cm thick
8 exciter engine. Frame can be painted in accordance with the interior. Panel is available in several colours or in an easy-to-paint-yourself version. Ceiling Version | Behringer HPM1000
The HPM1000 multi-purpose headphones provide semi-pro-level users
with an incredible performance unheard of in this price category. They
feature an ultra-wide frequency response, high dynamic range, a
high-resolution capsule and oval-shaped ear cups with a comfortable
headband.
Features:
Ultra-wide frequency response
High dynamic range
High-resolution capsule
Single-sided cord
Oval-shaped ear cups
Comfortable headband
Technical data:
Frequency response: 20 Hz - 20 kHz
Max. power handling: 100 mW
Impedance: 32 Ohm
Sensitivity: 105 dB @ 1 kHz
Cord length: 2.0 m
Connector: ?" TRS stereo jack |
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
80 Hz |
Performance
Frequency Range |
70 Hz to 20 kHz |
Maximum SPL |
147 dB SPL |
Impedance |
600 Ohms |
Load Impedance |
2000 Ohms |
Sensitivity |
2.6 mV/Pa |
Signal-to-Noise Ratio |
76 dB A-Weighted |
Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
Weight |
11.29 oz / 320 g |
|
Reviews
There are no reviews yet.