Content |
- Speaker Diaphragm B36098
- Replacement for several Speaker brands
- Voice coil: 1.35" (34.4mm)
- Ring Diameter: 62.5 mm
- Total diameter : 65,5mm
- The center distance of the two terminals post: 70.4mm
- Total Length: 83.5 mm
- Impedance: 8 ohm, DCR: 6.2 ohm
- Titanium dome
- Fits Driver and Cabinet Models:Varius
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
B36098 |
VC Diameter |
34.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
CCAR/ALR/SV |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
63 mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
|
- Replacement diaphragm kit for 14XT™driver
for Impulse 100, TLS-2, TLS 2X, TLS-4, TLS-5, TLS 5X, TLM-2, TLM-5,Impulse 100P, Impulse 100 White, PR 10, PR 12, PR 15, SSE-10,SSE-12, SSE-15, SSE-6, SSE-26
-
Peavey 14XT Diaphragm Part # 00442500
-
Voice coil: 1-3/8" (35.5mm)
-
Diameter: 2-3/4" (70mm)
-
Impedance: 8 ohms, Re: 6.8 ohms
-
Titanium dome with edge wound voice coil on Kapton former
-
Fits Peavey Driver and Cabinet Models:
Peavey: 14A, 14-A, 14 A, 14XT, 14-XT, 14 XT, Impulse 100, TLS-2, TLS2, TLS 2X, TLS-4, TLS4, TLS-5, TLS 5X, TLS5X, TLM-2, TLM-5, Impulse 100P, Impulse 100 White, SSE-10, SSE-12, SSE-15, SSE-6, SSE-26, 00442510, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
| JBL D16R2408 Genuine Diaphragm for 2408H 16 Ohm
This genuine JBL replacement diaphragm is compatible with the 2408H horn driver. JBL part number D16R2408.
This driver has been used in many JBL cabinets. | |
- JBL Factory Speaker Diaphragm part # D8R2452-SL.
- Specs: Voice coil: 3.93" (100mm), Diameter: 5" (76mm), Impedance: 8 ohm, DCR: 4 ohmFits JBL: 5732-M/HF, HLA4895, VP7210-95DP, VP7212/64DPAN/CN/DA, VP7212/95DPAN/CN/DA, VP7212/95DPC, VP7212-MDP, VP7215/64DPAN/CN/DA, VP7215/95DPAN/CN/DA, VP7215/95DPC, VP7315/64DPAN/CN/DA, and many more!
|
Reviews
There are no reviews yet.