ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE

5.90 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan. HDMI Male to VGA Female Video Converter […]

 

Read more

ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE

This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan.
HDMI Male to VGA Female Video Converter Adapter Cable for PC Laptop HDTV Projectors and other HDMI Input Devices:

  • Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
  • Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
  • With this version, we added a standby function to lower the energy consumption
  • On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
  • Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
  • More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal
Weight 0.08 kg

Reviews

There are no reviews yet.

Be the first to review “ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE”

Your email address will not be published. Required fields are marked *

Quick Comparison

ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver White removeM-AUDIO Micro DAC Digital to Analog USB removeMARANTZ HD-AMP1 Integrated Amplifier with USB-DAC removeM-AUDIO Transit Pro Digital to Analog Converter removeARTSOUND VD-275 CONVERTER ANALOG AUDIO RCA TO DIGITAL COAXIAL/OPTICAL With power adapter remove
NameARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE removePRO-JECT AUDIO BLUETOOTHE BOX E Receiver White removeM-AUDIO Micro DAC Digital to Analog USB removeMARANTZ HD-AMP1 Integrated Amplifier with USB-DAC removeM-AUDIO Transit Pro Digital to Analog Converter removeARTSOUND VD-275 CONVERTER ANALOG AUDIO RCA TO DIGITAL COAXIAL/OPTICAL With power adapter remove
Imagepro-ject-audio-bluetooth-receiver-box-e-converter hi-fi
SKUVD231BT BOX E WMI/EM/000006HD-AMP1Transit ProVD275
Rating
Price5.90 incl. GR VAT139.00 incl. GR VAT 100.00 incl. GR VAT1,125.00 incl. GR VAT 239.00 incl. GR VAT14.81 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

Only 5 left in stock (can be backordered)

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorderOnly 5 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Wireless music streaming with almost CD-quality
  • BT 2.1 + EDR
  • Supports aptX & SBC codecs
  • Easy to install and use
  • Fast auto pairing (3 to 5 seconds)
  • Up to 8 different BT sources are memorized
  • Works within a range of approximately 10 meters
  • RCA analogue and Toslink digital outputs (switchable)
  • Outboard power supply included
  • Black or White casing
ContentARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan. HDMI Male to VGA Female Video Converter Adapter Cable for PC Laptop HDTV Projectors and other HDMI Input Devices:
  • Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
  • Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
  • With this version, we added a standby function to lower the energy consumption
  • On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
  • Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
  • More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal

Bluetooth Receiver

  • Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box E
Effective range of wireless signal up to 10m in case of direct visibility
Line-level output: 1 x RCA/Cinch
Output voltage: 2Vrms
Digital outputs: 1 x optical (TOSlink®)
BT version: 2.1 + EDR
Supported codecs: aptX, SBC, A2DP BT profile
Frequency: 2402 ~ 2480 MHz
Sensitivity: - 84dBm
Maximum TX power +4dBm
Outboard power supply: 9V/300mA DC
Power consumption: 100mA/9V DC,<1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
Weight: 250g without power supply

Micro DAC is a USB digital-to-analog (DAC) converter with two outputs, one analog and one digital (optical). Itʼs ideal for converting the audio from your computer into a high-quality analog format without needing to carry anything larger than a flash drive. The sound quality available from the typical headphone jack on a portable device or coming from the standard-issue soundcard found in virtually every computer leaves a lot to be desired.  Micro DAC delivers a marked upgrade in sound quality, compared to just plugging your headphones directly into your unitʼs headphone jack.

Use the 1/8-inch analog output to connect any headphones, and enjoy vibrant high-fidelity sound. There is a gain switch that boosts the signal level, so you can drive even high-impedance headphones to a robust loudness level. And since virtually all high-quality audio equipment has an optical digital input, Micro DACʼs optical digital output is perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.

Micro DAC has a rugged aluminum housing and is USB-bus-powered. Getting professional-quality audio from your computer couldnʼt be easier!

  • Aluminum housing for ruggedness while traveling
  • 1/8" headphone output
  • 1/8" coaxial digital output
  • Gain switch for high-impedance headphones, to easily drive any model
  • Slim, small design for portability
  • Professional audio quality
  • 16-bit/48kHz audio conversion over a USB connection
  • USB-bus-powered
Requirements
  • Windows 7 - Windows 10 Compatible
  • OSx 10.7.5 - 10.11 Compatible

 

Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).

The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.

Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.

Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.

The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.

There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.

The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.

Available ColorsBlack
Remote ControlRC002HD
Power Consumption in W55
Standby Consumption in W0.3
Auto Power off
Detachable Power Cable
Maximum Dimensions (W x D x H) in inches12.0 x 13.9 x 4.2
Weight in lbs12.8

 

 

Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.

Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.

Features
  • Super-high resolution USB to optical/DSD converter
  • Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
  • Signal-to-noise ratio: 112dB
  • Extremely low distortion: THD+N 0.003%
  • Digital (optical) and analog outputs
  • Direct Stream Digital rates: DSD64, DSD128
  • Dual headphone outputs: ¼-inch, 1/8-inch
  • Compatible with headphones from 16–600 ohms
  • USB-bus-powered or optional AC adapter
    Requirements
  • Minimum System Requirements:
  • M-Audio Windows Driver
  • Windows 7
  • OSx 10.9
 

 

Analog to Digital Optical Toslink Audio RCA Converter/Adapter, With power adapter The ARTSOUND new * Analog to Digital Audio Adapter/Converter * converts analog Left/Right RCA-style audio connections to digital S/PDIF coax or TOSLink outputs.The unit is compact, easy to install, and operates in a wide variety of operating conditions. How it works: Simply plug in your analog audio source into the RCA jacks, then connect your digital receiving device ... So you’ve got your entire audio system running Digital (Coax or Toslink) audio, but you’ve got one old piece of equipment with analog output that is gumming up the works? No problem! Just get the Analog to Digital Audio Converter and bring your old equipment into the digital age! This compact little converter has a set of right/left RCA analog audio input jacks. It will simultaneously convert the analog audio into Coax and Optical (Toslink) Digital signals. You can connect either or both outputs to an appropriate digital audio input on a TV, AV receiver, or anything else. The converter has a digital sampling rate of 48 kHz and produces an LPCM stereo audio output signal. It is powered by a 5V DC power adapter, which is included. All the connectors are gold-plated. Note that this converter only works one way – Analog to Digital. It will NOT convert digital signals to analog!
Weight0.08 kg300 kg0.10 kg6.00 kg1.00 kg0.08 kg
DimensionsN/A12 × 3.2 × 10 cmN/AN/AN/AN/A
Additional information
Weight 0.08 kg
Weight 300 kg
Dimensions 12 × 3.2 × 10 cm
Weight 0.10 kg
Weight 6.00 kg
Weight 1.00 kg
Weight 0.08 kg