ARTURIA MicroFreak Vocoder Hybrid Analog/Digital Synthesizer with Dig. OscillatorsLimited Edition White

The Arturia MicroFreak Vocoder Edition takes the hybrid Freak formula and makes it even better with a 16-band Vocoder mode, a detachable gooseneck mic and a sleek, updated look. It\'s the uniquely unpredictable MicroFreak, with 14 digital oscillator modes, velvety analog filters and heaps of modulation and randomization controls, supercharged with wild vocoding abilities.

The Vocoder Engine
Arturia created a 16-band mode to transform your voice in the Freakiest way possible. The vocoder engine features three waveforms: sawtooth, pulse width and noise. Timbre and Shape knobs adjust the response of the 16 frequency bands.

MicroFreak Vocoder Edition goes beyond robot vocals. 16 presets give you instant access to android translations, crystalline harmonies and vibrant formant sequences. Connect an external sound source, like a drum machine or synth, via the headphone socket for glitchy sound processing.

Step Up to the Mic
A simple, removable mic attachment lets you sprinkle your voice into the mix. A gooseneck design means quick position adjustment, with easy connection straight into the headphone socket alongside your cans. The utility menu lets you set your preferred mic gain and noise gate settings.

A New Dress Code
MicroFreak has always been out to make a statement, and the Vocoder Edition is no exception. The control panel has been given a makeover. The center strip boasts a bold Swan graphic, while a sleek white finish makes this limited-edition Freak stand out from the crowd.

The Freak Within
Behind the revamped appearance and microphone attachment is the same lovable maniac that set the synth world spinning. Sparkling digital and wavetable oscillators collide with warm analog filters. A unique poly-aftertouch PCB keyboard combines with a distinctly freaky arpeggiator and sequencer. Bathe your mix in sonic hysterics with the erratic mod matrix or the unique Spice and Dice randomizers.

• Synthesizer with 256 preset slots and 224 factory presets
• 14 variable digital oscillator modes, including Mutable Instruments Plaits engines and new Vocoder mode
• Gooseneck electret microphone
• Analog State Variable Filter, 12dB/octave, resonant, Low Pass, Band Pass, High Pass
• ADSR envelope
• Cycling Envelope offering two modes: Envelope & LFO
• LFO with Sync: Sine, Tri, Saw, Square, Random, Slew Random
• Modulation matrix with 5 sources and 7 destinations (3 custom destinations)
• Monophonic or Paraphonic modes - Up to 4 voices
• Chord mode lets you program a chord shape and play it on any note
• Scale Quantize lets you set a specific scale for the white notes for easy performance
• 25-key capacitive keybed with polyphonic aftertouch
• Capacitive touch strip
• Crisp OLED display for editing and parameter values
• Powerful multi-mode arpeggiator: Up, Order, Random, Pattern modes
• Spice & Dice Gate randomizers
• 64-step sequencer: 2 patterns per preset, 4 automation tracks per preset
• CV / Gate / Mod outputs
• USB, Clock and MIDI in and out
• 6.35mm master and 3.5mm headphone output
• MIDI Control Center software included

Bass Station II is an analogue mono-synth based on the classic original Bass Station but re-worked for the 21st century. It has two filters, two oscillators plus a third sub-oscillator, patch save and a fully analogue effects section. Add a step sequencer, arpeggiator, full sized keys and a powerful modulation section and you have the makings of a synth that is built for bass, but capable of so much more.

• Osc 1
• Osc 2
• Sub Osc (3)
• Noise generator

Osc 1 & 2

Select between waveforms:

• sine
• triangle
• sawtooth
• square/variable pulse width

Features

• Sync 1 & 2
• Detune 
• Octave range
• Pitch bend
• Pitch modulation from Mod Envelope and/or LFO 1
• Pulse width modulation from Mod Envelope and/or LFO 2

Sub Osc (3) which is tracked to Osc 1

Select independently between waveforms:

• Sine
• Square
• Narrow pulse

Features

• All modulation and tuning tracked to Osc 1
• Independent octave select 

• Osc 1 level
• Osc 2 level
• Sub Osc level
• Noise generator level
• Ring modulation depth
• External signal level

Two filter types

• Acid type (diode ladder filter design)
• Classic type (derived from original Bass Station)

Features

• Cutoff
• Resonance
• Overdrive
• Filter frequency to Mod Envelope depth
• Filter frequency to LFO 2 depth

Select 'Classic' filter between:

• Low pass
• Band pass
• High pass
• 12dB slope
• 24dB slope

Two ADSR Envelopes  (Attack/Decay/Sustain/Release)

• Amp Envelope
• Mod Envelope
• Combined control of both Envelopes

Select triggering mode between:

• Single trigger (holds envelope state when new note is played)
• Multi trigger (re-triggers with every new note played)
• Autoglide (engages portamento) 

There is also a VCA limiter

Two LFOs each selectable between:

• Triangle
• Sawtooth
• Square
• Sample and hold
• Both LFOs independently adjustable between rate and delay time
• Key sync LFO 1 & 2
• LFO slew on LFO 1& 2 (low pass filter on the LFO waveform)

• Distortion send
• Oscillator filter mod amount (FM effect created by Oscillator 2 modulating filter freq)
   

Arpeggiator

• Up to 32 different patterns
• Select between 1-4 octave range
• Swing function
• Select direction:
• up
• down
• up / down 1
• up / down 2
• As played
• Random
• Latch (hold the arpeggiator)

Step Sequencer

• Up to four sequences
• Assign one of 32 preset rhythms or create your own
• insert rests or legato (slide)
• Sequencer re-trigger function

• Adjust glide time
• Single trigger or re-trigger modes
• Integrate into step sequencer and arpeggiator

• 25 note synth-action keyboard
• Aftertouch can be assigned to modulate:
• Filter frequency
• LFO 1to Osc pitch
• Osc 2 speed
• Pitch wheel
• Modulation wheel can be assigned to:
• LFO 2 to filter frequency
• LFO 1 to Osc pitch
• Osc 2 pitch
• Octave up/ down buttons
• 64 factory presets
• 64 slots for user patches (and patch dump facility for storing more)
• Master volume dial

• USB MIDI (for connecting & powering Bass Station II via host computer)
• Mono output on 1/4" TRS jack
• Headphone output on 1/4" TRS jack
• External input on 1/4" TRS jack
• Sustain pedal input on 1/4" TS jack
• MIDI IN / MIDI OUT ports on 5 pin din
• DC power input
• Switch between power off / DC powered / bus powered

• 18" wide x 10.75" deep x 3" tall

With the KROSS, the sounds and songs that you've created at home and the system that you use every day can go with you onto the stage or into the street! Featuring rich sounds that exceed its class, yet remaining highly portable, the KROSS is designed for practical usability. There's a convenient mic input and a built-in audio recorder, and it can run on 6 x AA batteries. It's a distinctive new standard in music workstations, with specs and style that set it apart from all others.

• Stylish and distinctive red and black two-tone color design
• The lightweight body is only 4.3 kg/9.5 lbs
• Can be powered by 6x AA batteries
• Piano, electric piano, and drum sounds that exceed its class
• A wide variety of sounds that utilize twice as much PCM memory as previous instruments, and meet the needs of a broad range of musical styles
• Sound Selector makes it easy to find the sound you're looking for
• Favorites function lets you register 64 selected sounds or audio songs for one-touch access - a great feature for live performances
• Pro-quality EDS-i sound engine built-in, with a total of seven effects available for simultaneous use
• External input jacks allow a mic or external audio source to be directly connected.
• Quick Layer/Split function for on-the-fly versatility
• Stereo audio recorder allows you to record and overdub your performances and vocals
• Step sequencer inherited from the Electribe, a 16-track MIDI sequencer, a drum track, and an arpeggiator
• Connects to your computer via USB for plug-in integration with your favorite DAW

Korg Volca Keys, the new Analogue Loop-Synthesizer from Korg!

• 3-Voices polyphon.
• 3 VCOs.
• 1 VCF.
• 1 VCA.
• 1 LFO and 1 EG.
• Voicing-Function.
• Delay-Effect.
• Loop Sequencer.
• Motion Sequence-Function.
• Active Step and Flux Function.
• Selftuning-Function.
• Multitouch Trigger Pad / Step-Button.
• LED-Display.
• Build-in Speaker.
• Sync I/O 1/8" Mini-Input female Mono.
• MIDI In.
• Headphone-Out 1/8" Mini-TRS Stereo.
• Power via 6x AA Battery or optional Power Supply (KA-350 not included).
• Dimension: 193 X 115 X 45 mm (WxHxD).
• Weight: 372gr.

The Korg PaAS Optional Speaker System for Pa3X is an optional speaker system for the Pa3X series keyboards. The speaker mounts on top of the keyboard, and uses Korg's proprietary Easy Connect System for a cable-free connection. Use the PaAS speaker system to deliver hi-fidelity audio at home or for monitoring applications on stage.

Analog Physical Modeling Engine with multiple synthesis and oscillator types, Each oscillator type has flexible LFO and ADSR routing plus unique Texture and Mod controls that work as follows:
Multi-saw Texture, control adds sub-oscillator Mod, layers multiple sawtooth waves Pulse Texture, changes pitch of 2nd square wave Mod, change pulse width Oscillator Sync Texture, changes pitch and tone of OSC2 Mod, sets pitch change amount Ring Modulation Texture, changes pitch of OSC1 Mod, changes pitch of OSC2 Frequency Modulation Texture, sets Modulation amount Mod, changes pitch of the Modulator

?Onboard effects processor with five types add depth to your sound The effect types are: OFF (effect bypass,) Delay, VCM Phaser, VCM Chorus/Flanger and Distortion ?8-note polyphony allows complex chords and pads or switch to mono Mode for fat synth bass or solo leads