M-Audio AV32 Monitor Speakers ACTIVE 3” 10W RMS (PAIR)

• 3-inch polypropylene-coated woofers for tight, accurate bass
• 1-inch ferrofluid-cooled silk cone tweeters for clear, pristine highs
• OptImage IV tweeter wave guides for superior imaging and detail
• 10-watt per channel amplifier
• RCA inputs for connecting gaming systems, DJ gear, mixers, and more
• Front-panel 1/8-inch stereo auxiliary input for connecting your laptop or desktop computer, MP3 player, or other audio sources
• Front-panel 1/8-inch headphone output
• Front-panel volume control
• Acoustically-inert MDF cabinet with bass reflex design for deep, rich sound
• Attractive black vinyl laminate finish

• Type: Two-way desktop reference speaker
• Low-Frequency Driver: 3" diameter, polypropylene-coated, with high-temperature voice coil
• High-Frequency Driver: 1" diameter, silk cone tweeter
• Frequency Response: 80 Hz – 20 kHz
• Crossover Frequency: 3.3 kHz
• RMS SPL: 101.5 dB @ 1 meter
• Signal-To-Noise Ratio: > 90 dB (typical, A-weighted)
• Input Connectors: Left and right RCA line input and 1/8" aux input
• Polarity: Positive signal at "+" input produces outward low-frequency cone displacement
• Dynamic Power: 10 watts continuous, per channel into 4 Ω
• Input Impedance: 10 k Ω unbalanced
• Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
• Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
• Indicator: Blue power LED for aligning wave guide
• Power Requirements: 100-120V/~50/60 Hz, 220-240V/~50/60 Hz; powered via detachable 2-conductor line cord
• Cabinet: Vinyl-laminated MDF
• Dimensions:
• Weight:

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.