Content |
• Supercardioid directivity
• High SPL capacity, wide dynamic range, low distortion
• Powerful ND magnet, high sensitivity
• Dual membrane dome diaphragm
• Extended high frequency band
The PDM-45 is an all-round vocal microphone which also can be used as instrument microphone because of the flat metal pop filter. It has an excellent sound quality. Its transient response and directivity will make this microphone a good choice for professional users.
Specifications Type: Dynamic
Polar Pattern: Supercardioid
Frequency Response: 50-18,000 Hz
Sensitivity: -56 dBV/Pa* (1.6 mV)
Max. SPL: 134 dB SPL
Impedance: 250 Ω
Power supply: none
Connector: 3p. XLR (male)
Accessories: Mic clip, 5/8“-3/8" Threaded Adapter, Pouch
Dimensions: Ø49 x 173 mm
Net Weight: 0,39Kg
|
Offered in a convenient and cost-effective "three-pack," the Q6 gives you plenty of output and performance for a variety of situations.
3 Mics in a Foam Padded Hard Shell Case
High gain, low impedance design
Dynamic Neodymium mic element
Super Cardioid pickup pattern
Multi-axis shock mounted element
On/Off Switch
Hard Shell Carry Case for 3 mics
(3) Mic Clips included
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
80 Hz |
Performance
Frequency Range |
70 Hz to 20 kHz |
Maximum SPL |
147 dB SPL |
Impedance |
600 Ohms |
Load Impedance |
2000 Ohms |
Sensitivity |
2.6 mV/Pa |
Signal-to-Noise Ratio |
76 dB A-Weighted |
Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
Weight |
11.29 oz / 320 g |
|
The cardioid e 935 is a fully professional vocal microphone,
developed to cut through high on-stage levels.
Features
Rugged metal body
Advanced shock-mount design
Consistent on-/off-axis response
Hum compensating coil
Made in Germany
Delivery includes a pouch and a microphone clamp
Delivery Includes
1 e 935
MZQ 800 microphone clamp
Pouch
Technical Data
Pick-up pattern Cardioid
Frequency response (microphone) 40.....18000 Hz
Sensitivity in free field, no load (1kHz)
2,8mV/Pa bei 1 kHz = -51dB (0 dB = 1V/Pa) = -71 dB (0 dB = 1V/ubar)
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 47 x 181 mm
Weight 330 g
|
WITH XLR SWITCH ON/OFF
Polar pattern | supercardioid | Frequency range | 70 Hz to 20 kHz | Sensitivity | 2.6 mV/Pa (-52 dBV) | Max. SPL | 147/156 dB SPL (for 1% / 3% THD) | Equivalent noise level | 18 dB-A | Impedance | = 2000 ohms | Connector | 3-pin XLR | Finish | matte grayish blue | Dimensions | length: 185.2 mm (7.3 in.); diameter: 51 mm (2 in.) | Net weight | 340 g (12 oz.) | Shipping weight | 655 g (1.45 lbs.) | Patent(s) | Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651) |
| The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
- Pneumatic shockmount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant microphone clip that rotates 180 degrees
- High quality, rugged, and reliable
- Cardioid dynamic
- Frequency response: 50 Hz to 15 kHz
Suggested Applications
Lead Vocals
Backup Vocals
Harmonica
Frequency Range |
50 Hz to 15 kHz |
Impedance |
150 Ohms |
Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
Reviews
There are no reviews yet.