DAP AUDIO D2320 Compact 6.2 19 Inch Mixers

472.43 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Channel displays that show the input source
Gain settings at back panel
Main EQ settings at back panel
Front input for Phone/MP3 devices

Ideal for non-technical users

Channel displays that show the input source
Gain settings at back panel
Main EQ settings at back panel
Front input for Phone/MP3 devices

Ideal for non-technical users

 

Read more

D2320_MANUAL_GB_V1.pdf

• Mic input with Comp/Limit
• USB Player with pitch control
• Display with ID3 Text
• Direct MP3 / Phone input
• 2 Masters & Monitor outputs

Compact 6.2 is the ideal mixer for sport instructors. It has 2 microphone inputs with built-in compressor limiters and high-pass filters. This will help the instructor to have the correct level and perfect intelligibility. Dynamic range will be extended and distortion will be eliminated. It has one selector to choose the audio source which can  be the internal USB mp3 player, the front input or 2 line inputs at the back panel. The MP3 player has ID3 text and can be pitched which is ideal for fitness, spinning and all kinds of group work outs. The front input can be used for a normal line level but also can be switched into a special Phone mode which adjusts the input sensitivity into the correct value for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. It has 2 master outputs with separate volume controls which can be locked and a separate monitor volume especially for the instructor. All technical settings like EQ, Gain, Phantom Power, Compression & Treshold are on the backside of the unit to be set by the installer. Now the instructor only has to set his source and mic level and doesn’t need to worry about difficult settings. The Compact 6.2 is an all-in-one solution for your sport instructor, it’s easy in use and has all features which are needed to give a work out instruction without worrying about anything else but the audience.

Specifications

Input channels: 2 x Microphone, combo XLR/Jack 2 x Line, RCA, 1 x Phone, 3,5mm jack / RCA
Output channels: 1x Master A RCA, 1x Master B, Balanced XLR & RCA, 1x Monitor RCA
USB supported format: FAT up to 16Gb
Audio format: MP3 128kbps, 192kbps, 224kbps, 256kbps, 320kbps
Master EQ: 80Hz, 2,5KHz, 12KHz, -6dB / +6dB
Frequency response: 20Hz – 20Khz
T.H.D.:

Weight 2.20 kg

Reviews

There are no reviews yet.

Be the first to review “DAP AUDIO D2320 Compact 6.2 19 Inch Mixers”

Your email address will not be published. Required fields are marked *

Quick Comparison

DAP AUDIO D2320 Compact 6.2 19 Inch Mixers removeAllen & Heath Xone:92 4ch Professional DJ Mixer removeOMNITRONIC EMX-5 Professional 5-channel DJ mixer removeBEHRINGER DJX900 usb Pro Mixer 5-Channel DJ Mixer removeECLER AC-6 Professional Mixer 8 Channels removeALLEN HEATH XONE DB2 Digital mixer 4 channel remove
NameDAP AUDIO D2320 Compact 6.2 19 Inch Mixers removeAllen & Heath Xone:92 4ch Professional DJ Mixer removeOMNITRONIC EMX-5 Professional 5-channel DJ mixer removeBEHRINGER DJX900 usb Pro Mixer 5-Channel DJ Mixer removeECLER AC-6 Professional Mixer 8 Channels removeALLEN HEATH XONE DB2 Digital mixer 4 channel remove
Image
SKUD2320144.049EMX5E005268AC-6144.034
Rating
Price 472.43 incl. GR VAT 1,731.00 incl. GR VAT331.07 incl. GR VAT 325.00 incl. GR VAT1,776.92 incl. GR VAT 1,133.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Channel displays that show the input source
Gain settings at back panel
Main EQ settings at back panel
Front input for Phone/MP3 devices
Ideal for non-technical users
ContentD2320_MANUAL_GB_V1.pdf • Mic input with Comp/Limit • USB Player with pitch control • Display with ID3 Text • Direct MP3 / Phone input • 2 Masters & Monitor outputs Compact 6.2 is the ideal mixer for sport instructors. It has 2 microphone inputs with built-in compressor limiters and high-pass filters. This will help the instructor to have the correct level and perfect intelligibility. Dynamic range will be extended and distortion will be eliminated. It has one selector to choose the audio source which can  be the internal USB mp3 player, the front input or 2 line inputs at the back panel. The MP3 player has ID3 text and can be pitched which is ideal for fitness, spinning and all kinds of group work outs. The front input can be used for a normal line level but also can be switched into a special Phone mode which adjusts the input sensitivity into the correct value for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. It has 2 master outputs with separate volume controls which can be locked and a separate monitor volume especially for the instructor. All technical settings like EQ, Gain, Phantom Power, Compression & Treshold are on the backside of the unit to be set by the installer. Now the instructor only has to set his source and mic level and doesn't need to worry about difficult settings. The Compact 6.2 is an all-in-one solution for your sport instructor, it's easy in use and has all features which are needed to give a work out instruction without worrying about anything else but the audience. Specifications Input channels: 2 x Microphone, combo XLR/Jack 2 x Line, RCA, 1 x Phone, 3,5mm jack / RCA Output channels: 1x Master A RCA, 1x Master B, Balanced XLR & RCA, 1x Monitor RCA USB supported format: FAT up to 16Gb Audio format: MP3 128kbps, 192kbps, 224kbps, 256kbps, 320kbps Master EQ: 80Hz, 2,5KHz, 12KHz, -6dB / +6dB Frequency response: 20Hz - 20Khz T.H.D.:* 6 Dual stereo inputs, 2 with mic inputs * RIAA preamps for up to 4 turntables * Input selectors with 2 colour indicators * Smooth action level controls * 2 Stereo aux sends with pre/post switching * 4 band EQ - high definition of frequency bands, with ʽinfinite killʼ on HF and LF; wide Q for cut, narrow Q for boost * MIDI output from VCF 1+2, crossfader, LFO 2 (MIDI clock), dedicated data control and start/stop button * Large ʽlight-pipeʼ illuminated cue switches * 9 led 3 colour channel ʽbulls eyeʼ LED meters * Crossfader and Filter assign switches * Either smooth travel 60mm VCA faders or rotary VCA faders (Linear or Rotary versions) * Active Penny & Giles VCA crossfader allowing contour to be set from smooth to scratch mix * Cue/Mix monitor balance control * 2 Independent mix outputs * 2 Rotary master level controls * Dual stereo analogue VCF effects * 3 Filter modes combine for more effects * Independent frequency sweep controls * Resonance control for subtle or wild effects * Filter LFO Depth and tempo controls * Illuminated Filter switches punch effect in or out * Powerful headphones monitor with auto cue * Headphones split cue and Aux 1 & 2 monitoring * Stereo music only booth monitor output * Booth mono and mute switching * 9 led 3 colour main ʽbulls eyeʼ LED meters * Balanced +4dBu XLR stereo Mix 1 output * Impedance balanced Line stereo Mix 2 output * Pre-fade recording output Technical Data Outputs: 2 Independent mix outputs Mix 1:Balanced 0dBu XLR stereo Mix 1 Mix 2:Impedance balanced Line stereo Mix 2 output Booth monitor: Stereo music only MIDI output from VCF 1+2 2 Headphone (6,3 mm/ 3,5 mm)
  • 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
  • 1 DJ microphone channel with talkover selector and 2-band equalizer
  • Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
  • Replaceable crossfader for crossfading between input channels with assignment switches
  • 10-digit stereo LED level meter, master level control, and balance level control
  • Adjustable zone output, and record output, independent of the master
  • Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
  • Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
  • Operation via supplied power unit
  • Rack installation, 4 U
Power supply: 230 V AC, 50 Hz ~,
via supplied power unit
Power consumption: 30 W
Inputs:
DJ MIC (front): combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.)
MIC 1,2 (rear): 6.3 mm jack (1/4“) (bal.)
Impedance: 1 kohms
Minimum input voltage: 1.5 mV RMS
LINE 1-5: stereo RCA
Impedance: 27 kohms
Minimum input voltage: 150 mV RMS
PHONO 1,2: stereo RCA
Impedance: 47 kohms
Minimum input voltage: 3 mV RMS
Outputs:
MASTER: stereo RCA, stereo XLR (3-pin)
ZONE: stereo RCA
Impedance: 400 ohms
Output voltage: 1 V RMS/ 0 dB
REC: stereo RCA
Impedance: 5 kohms
Output voltage: 225 mV RMS
Headphones: 6.3 mm stereo jack (min. 16 ohms)
Tone control (DJ MIC):
1x High: -12 dB to +12 dB/ 1 kHz, ±1 dB
1x Low: -12 dB to +12 dB/ 1 kHz, ±1 dB
Tone control (channels 1-5):
5x High: -12 dB to +12 dB/ 1 kHz, ±1 dB
5x Mid: -12 dB to +12 dB/ 1 kHz, ±1 dB
5x Low: -12 dB to +12 dB/ 1 kHz, ±1 dB
S/N ratio: >80 dB
Frequency range: 20-20,000 Hz
Distortion: 0.02%
Dimensions (WxHxD): 483 x 179 x 94 mm (19“, 4 U)
Weight: 4 kg
Professional 5-channel ultra-low noise DJ mixer with stylish, black design 45-mm infinium "contact-free" optical crossfader with adjustable tension and fader curve for years of use State-of-the-art 24-bit digital effects with advanced parameter control Built-in USB interface for recording and playback of any digital music file. Works with your PC or Mac computer—no setup or drivers required Intelligent dual auto-BPM counter with time and beat sync display 3-band kill EQ and precise level meters with peak hold function per channel Additional 3-way kill switches with extremely steep frequency separation Awesome adjustable XPQ stereo surround effect VCA-controlled faders for utmost reliability and noise-free performance Adjustable crossfader curve for all mixing styles Monitor function with master/cue balance control and split option Auto-talkover function with separate depth control High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany  Although the origins of the company date from 1965, ECLER presented its first mixer back in the 70s: the A4, a simple 4 channel mixer oriented to Super 8 film sound edition. The company grew in the 70s with the boom of disco and tourism. The AC-4 was a high fidelity mixer designed to meet the most demanding sound requirements in discos, theatres, cinemas, recording studios, conference rooms... The electronic circuits and the extreme selection of all components and transistors used, made the AC-4 a professional high quality mixer. The new AC-6 is a tribute to those old school, simple, robust, reliable and great sounding mixers. The AC6 enables a new generation of DJs to enjoy the unique sound of those legendary mixers.

The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.

The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.

Massive FX Library

Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.

FX Cascade

The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.

Editable FX Parameters

Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.

Input Matrix

Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.

Trimodal EQ

Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.

Mic/Line Input

With 2 band EQ, gain, cue and mix level and with full access to FX.

High Visibility OLED Display

The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.

Lightweight chassis

DB2's lightweight aluminium chassis is designed to make touring with the console easy.

Integral soundcard

The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.

MIDI control

All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.

X:LINK

X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.

Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option

Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade  uses 100% conductive plastic  tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.

 

Weight2.20 kg4.00 kg4.00 kg3.50 kg4.00 kg5.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.20 kg
Weight 4.00 kg
Weight 4.00 kg
Weight 3.50 kg
Weight 4.00 kg
Weight 5.50 kg

Recently Viewed Products