Content |
PR-52
50W - This set contains 2 pcs. Black
2-way passive plastic vented speaker system,
including mounting/hanging brackets
Woofer: 5.25“, 16 Ohm, Rubber Edge
Tweeter: 12,6 mm Mylar Dome Tweeter
Nominal Impedance: 16 Ohm
Power Handling: 50 Watt Continuous
Freq. Range (-10 dB): 50 – 20.000 Hz
Dimensions (LxWxH): 185 x 175 x 250 mm
Net Weight: 2,5 kg
|
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.
Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam
|
Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
Behringer 1C 100W-4Ω Monitor Speakers
- Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
- High power handling capability (100 W / IEC268-5) produces full-range output with extremely low distortion
- Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
- Ultra-linear frequency range from 60 Hz to 23 kHz
- Phase-optimized and high-precision crossover for absolute phase linearity
- Auto-overload protection prevents tweeter damage and resets automatically
- Bracket for wall/ceiling mounting included
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Introducing the Stylish MONITOR 1C-BK Monitor Speakers from BEHRINGER
The MONITOR 1C-BK 2-way monitor speakers offer accurate sound reproduction combined with a great design to suit your fixed installations, stereo and surround applications, home recording studios as well as audio and video productions.
Each of these 100-Watt speakers has a powerful 5 ½" woofer with a lightweight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity and auto-overload protection that resets automatically. The result: full-power, ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. They come with convenient mounting brackets for easy installation.
Looking for great sound and style? The MONITOR 1C-BK speaker definitely got it!
SPECIFICATIONS
Connector type Clip terminal
Wire diameter
Power capacity (prg.) 100 W (IEC 268-5)
Impedance 4 Ω
Frequency range 60 Hz to 23 kHz (-10 dB)
Nominal sound pressure level (SPL) 86 dB*W/m (program, bandwidth 100 - 5000 Hz on axis, full space)
Max. short term acoustic output 112 dB @ 1m (on axis, half space)
Tweeter ½“
Woofer 5 ½“
Crossover frequency 5000 Hz
Dimensions (H x W x D) 8.9" x 5.9" x 5.6" (225 x 150 x 142 mm)
Weight approx. 4 lbs each (1.8 kg each)
|
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.
Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam
Order No.
D 113 127
Cabinet
Full-Range
Configuration
Passive 2-Way
Nominal impedance
16 Ohms
Rated power RMS
150 Watts
Program power
300 Watts
Peak power
600 Watts
SPL 1W / 1m 4V / 16Ohm
94 dB
Max. SPL 1m(calculated with peak power)
122 dB
Frequency range ( -10dB ) Full range
90Hz - 20kHz
Frequency range ( -10dB ) measured with H5000-RCM26 preset
60Hz - 20kHz
Coverage angle nominal
90° *40°
Passive crossover frequency
2.2kHz
Voice coil tracking protection
Halogen
Component HIGH
Electro-Voice DH 3
Order No.
353 078
Component LOW
DND 6130-16
Order No.
366 420
Connectors Full-Range
1+, 1-
Wired through
1+, 1-
Connector modelSpeakon
2x NL4 MPR
Dimensions (WxHxD)
217x375x230 mm
Shipping weight
10 kg
Net weight
8 kg
Enclosure material
Birch plywood
Finish
Black 2-component paint
Grille
Powder coated steel, acoustic foam
Warranty
36 Months
|
Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)
|
Reviews
There are no reviews yet.