Content |
• 240 Watt
• Lightweight, only 13 kg
• Reinforced cabinet
• High driver protection
Specifications System Type: 2-Way Vented Passive Speaker cabinet
Continuous Power: 120 Watts
Peak Power: 240 Watts
Horn Coverage: 50°H x 50°V
Speaker Sensitivity (1W.1m): 95 dB SPL ±3dB
Max SPL: 118dB at 1m
Frequency Response: 58Hz~20kHz (- 6dB)
Impedance: 8Ω
Crossover Frequency: 3.2KHz
Protection: High Frequency Protection
Woofer: 10" / 2" Voice Coil
Driver: 1" / 1" Voice Coil
Construction: 15mm plywood, glued and reinforced,
Paint: Black, scratch resistant
Pole-mount: ABS 35mm pole-mount
Connectors: 2 x SPK4
Dimensions (H x W x D): 550 x 328 x 320mm
Weight: 13kg
|
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.
The PROMAXX feature-set is matched by the enclosure’s versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet.
Common features:
- bass reflex design cabinet
- 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
- 90°H x 60°V constant directivity horn
- Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles
- Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
- Speakon NL-4 IN and LINK OUT connectors
Code: |
40685 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
90° x 60° HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
50Hz - 24dBoct |
Input connector: |
2 x Speakon NL4 in&throu |
Net Dimension (WxHxD): |
320x550x275 / 12.6x21.6x10.8 mm/inch |
Net Weight: |
8.9/19.62 kg/lb |
Transport Dimension (WxHxD): |
400x630x360 / 15.7x24.8x14.2 mm/inch |
Transport Weight: |
11.4/25.13 kg/lb |
|
2-Way, 10“
High Power System |
Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
Specifications and Characteristics |
Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
Nominal Impedance |
8 Ohm |
Power Rating |
|
(RMS)2 |
300W |
Program2 |
600W |
Peak2 |
1200W |
Horizontal Coverage |
(-6dB) 90? |
Vertical Coverage |
(-6dB) 40? |
Sensitivity (dB/1w@1m) |
97dB SPL |
SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
Connectors |
2 Neutrik NL-4 Connectors on steel plate |
Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
Recommended Sub-woofer |
Space PMS-15 |
Enclosure and Installation |
Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
Handle |
On top of the cabinet. |
Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
Net Weight |
18Kg (39.6 pounds) |
Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
Notes |
|
1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
Specifications
Technical data
Speaker Type 2-Way Passive Speaker
Acoustical data
Nominal Power Rating 300 W/RMS
Program Power Rating 600 W/RMS
Peak Power Rating 900 W/RMS
Impedance 8 Ohms
Sensitivity 1W@1m 96 dB
Frequency Response [-10dB] 70 - 20.000 Hz
Frequency Response [+/- 3dB] 90 - 19.000 Hz
Max SPL 127 dB
HF 1 "
Type HF Compression Driver
Voice Coil HF 1.5 "
Driver Protection PTC
Directivity 90X70 °
Horn CD Horn Aluminium
Rotatable Horn Yes
Crossover Frequency (passive) 1800 Hz
Slope MF-HF 18 dB/Octave
LF 10 "
Voice Coil LF 2 "
Input Section
Signal Input 1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output 1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics
Housing Multiplex birch plywood
Housing Design Multifunctional
Color Black
Surface Texture Textured acrylic lacquer
Handles 1x on back
Pole Mount 36mm
Angles Up Monitore use 45 °
Front Grille 1.5 mm metall grille with acoustic foam in back
Rigging Points 12 x M8
Width 320 mm (12.8 in)
Height 508 mm (20.32 in)
Depth 320 mm (12.8 in)
Weight 14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components
| This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
| Full Range Speaker
- Equipped with: 10" + 1“
- Dispersion: 90° x 60° CD horn
- Power: 300 W RMS
- Impedance: 8 Ohm
- Frequency range: 95 - 19,000 Hz
- Max. SPL: 126 dB
- Flange mount
- 3 x M8 fly points
- 2 Handles
- Connectors: 2 x speaker twist
- Dimensions: 320 x 480 x 290 mm
- Weight: 12.9 kg
|
Reviews
There are no reviews yet.