DAP AUDIO D3673 EVO 5 2Way Full Range Passive speaker 5.25″ 60W 8Ω (2Pcs. White)

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam

• Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
• Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
• High 30W rated input power and 91 dB output sound pressure level.
• Durable, acoustically efficient polypropylene enclosure.
• Optional wall/under-eaves mounting bracket.

The AC15 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" dome tweeter integrated
into a 90° x 90° waveguide that provides even coverage throughout the intended usage area.  The AC15 utilizes a 5.25" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Dome Tweeter with 90° x 90° Coverage.
5.25" (135 mm) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket

Specifications:
Frequency Range (-10 dB): 80 Hz -20 kHz
Frequency Response (±3 dB): 90 Hz -18 kHz
Power Rating:
150W Cont. Pink Noise
300W Program
600W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 9.5" H x 5.9" W x 7" D (241.3 x150.3 x 177.8mm)
Weight: 10.5 lbs. (4.7 kg)

The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility

Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)