| Content | Audioengine B2 Premium Bluetooth Speaker
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly
stream all your music from any Bluetooth®-enabled device. Your
computer, iDevice, or Android phone already has Bluetooth, so get more
out of your music with the B2 wireless speaker. Experience award-winning
Audioengine® stereo sound, including a hand-built wood cabinet,
Bluetooth® aptX® and extended wireless range.
Easy setup
Setup
and pairing is really easy and no special software is needed. Hereʼs
how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
Versatile
The
audio quality of most Bluetooth products isn't usually very inspiring
and their limited range can be frustrating. The B2 solves these problems
by implementing the aptX codec, which is a high-quality audio converter
designed specifically for audio. The B2 also has special circuitry and a
precision-tuned antenna to extend the wireless range, providing much
more versatility than other Bluetooth speakers.
Upgrade your Bluetooth
You
already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B2
Bluetooth Speaker including aptX, extended range, hand-built wood
cabinet, and custom speakers.
See and hear the difference
The
hand-finished all-wood cabinet of the B2 reflects traditional
Audioengine design and the high-quality components and audio fidelity
are typical of Audioengine's commitment to great sound at affordable
prices. The Audioengine B2 continues to close the gap between your
computer music and home hi-fi and even if you're not an audio enthusiast
we guarantee your music will sound better!
| Type |
Powered Bluetooth speaker |
| Inputs |
Bluetooth, 3.5mm stereo mini-jack analog |
| Power Output |
60W peak total |
| Input Impedance |
10K ohms unbalanced |
| Frequency Response |
65Hz - 22kHz (+/-2dB) |
| SNR |
>95db (typical A-weighted) |
| THD+N |
|
|
Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.
Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.
The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
Specifications
- DAC
Burr-Brown/TI PCM5102
- Frequency Response
10Hz-20kHz, +0 -0.2dB
- Total Harmonic Distortion + Noise
0.002%
- Signal-to-noise ratio (A-weighted)
106dB (24-bit)
- Maximum output level
2.15V RMS
- Supported CODECS
SBC, AAC, aptX™
- Power requirements
0.7W maks.
- Dimensions
L 60 x W 30 x H 75mm
- Weight
40g
- EAN/UPC code
5 060133 602194
|
Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.
- Audiophile Bluetooth Music Converter
- High quality music replay from mobile devices
- Burr Brown PCM5102 24bit DAC
- Uses aptX™ streaming technology
- High-end audio circuitry and components
- High quality cast aluminium casework
The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.
Technical Specifications
- DAC: TI PCM5102
- Frequency response: 10Hz — 20kHz, ±0.1dB
- Total Harmonic Distortion: + Noise 0.002%
- Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
- Line output level: 2.15Vrms
- Supported CODECs: SBC, AAC, aptX®
- Power requirements: 0.7W max
- Dimensions (wxdxh, mm): 75 x 100 x 26
- Weight: 350g
| The best of all worlds - amazing sound, effortless wireless streaming with AirPlay®, a LightningTM connector for docking the latest generation of iPhones® and iPods® and a design that fits almost anywhere. Versatility, convenience and stunning performance; Z2 is the dock that has it all.
| Model |
Z2 |
| Description |
Wireless Music System |
| Technical features |
Apple® AirPlay® technology
Lightning connector
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
FlowportTM
Remote control |
| Drive units |
2x 87.5mm (3.5in) full range |
| Frequency response |
50Hz - 20kHz ±3dB on reference axis |
| Frequency range |
-6dB at 42Hz and 22kHz |
| Amplifier power output |
2x 20W |
| Input voltage |
100V - 240V ~ 50/60Hz |
| Rated power consumption |
36W |
| Standby power consumption |
|
| Overview: 2.0 speakers plus wireless subwoofer Hi-Fi class planar diaphragm tweeters 4 inch (105 mm) aluminum mid-range drivers Wireless subwoofer with 8 inch long-throw speaker driver Bluetooth 4.1 with Qualcomm® aptX™ decoder Class-D high efficient amplifier with DSP technology MDF wooden enclosure to reduce sound resonance
Features:
Power output :R/L (treble): 10W+10W
R/L (midrange and bass): 30W+30W
SW: 75W
Signal to noise ratio :R/L: ?85dB(A)
SW: 85dB
Frequency response :R/L: 60Hz – 40KHz
SW: 40Hz – 150Hz
Input type :PC/AUX/Optical/Coaxial/Bluetooth
Driver unit :Bass unit: 8-inch (220mm)
Mids+bass unite: 4-inch (105mm) x 2
Tweeter unit: Planar diaphragm tweeter x 2
| Audioengine B2 Premium Bluetooth Speaker
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly
stream all your music from any Bluetooth®-enabled device. Your
computer, iDevice, or Android phone already has Bluetooth, so get more
out of your music with the B2 wireless speaker. Experience award-winning
Audioengine® stereo sound, including a hand-built wood cabinet,
Bluetooth® aptX® and extended wireless range.
Easy setup
Setup
and pairing is really easy and no special software is needed. Hereʼs
how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
Versatile
The
audio quality of most Bluetooth products isn't usually very inspiring
and their limited range can be frustrating. The B2 solves these problems
by implementing the aptX codec, which is a high-quality audio converter
designed specifically for audio. The B2 also has special circuitry and a
precision-tuned antenna to extend the wireless range, providing much
more versatility than other Bluetooth speakers.
Upgrade your Bluetooth
You
already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B2
Bluetooth Speaker including aptX, extended range, hand-built wood
cabinet, and custom speakers.
See and hear the difference
The
hand-finished all-wood cabinet of the B2 reflects traditional
Audioengine design and the high-quality components and audio fidelity
are typical of Audioengine's commitment to great sound at affordable
prices. The Audioengine B2 continues to close the gap between your
computer music and home hi-fi and even if you're not an audio enthusiast
we guarantee your music will sound better!
| Type |
Powered Bluetooth speaker |
| Inputs |
Bluetooth, 3.5mm stereo mini-jack analog |
| Power Output |
60W peak total |
| Input Impedance |
10K ohms unbalanced |
| Frequency Response |
65Hz - 22kHz (+/-2dB) |
| SNR |
>95db (typical A-weighted) |
| THD+N |
|
|
Reviews
There are no reviews yet.