| Content | Perfect for use with IEMs while you’re out exploring or when you’re chilling at home. The nano iDSD LE partners with headphones or active speakers to give your audio a superior sound.
One small step…
Known as the ‘pocket rocket’, our nano iDSD LE is perfect if you’re new to digital audio and ready to take the first step to improve the sound of your music.
It’s a cut above above entry-level DACs with its power/performance and even better, its price is kind on your pocket too.
Perfect. Powerful
The nano iDSD LE plays high quality audio files up to DSD256 and keeps them in the ‘Bit Perfect’ format you know and love.
With a headphone amplifier that outputs 130mW, the nano LE packs a punch for most ear buds.
When the going gets good…
The good gets even better as the nano LE is simple to use.
At home, the nano connects to your existing system via RCA or 3.5mm line out, or use the USB3.0 cable to connect to your computer.
On the go, just connect a CCK cable for iPhone or OTG cable for Android via the additional shorty cable in the box.
Smooth operator
The iDSD LE is affordable yet atypically has a precise, analogue volume control.
It delivers a smooth sound with superior no-loss music quality.
It’s no joke
We’ve stamped out jitter with our Zero Jitter® technology to ensure you don’t miss a beat.
No beats or ‘Bits’ missed in our tech. (Sorry, we told you it was no joke!)
And finally, the nano LE has up to 8 hours of battery life for you to enjoy on the go.
Specifications
| Formats supported: |
PCM 44.1 to 384kHz/16-32bit
DSD 2.8, 3.1, 5.6 and 6.2MHz/1bit
DXD 352.8, 384kHz/24bit |
|
High-Speed Asynchronous USB 2.0
(32bit/384kHz) |
| Battery: |
Lithium-polymer 1000mAh |
| Power(max): |
1.5W |
| Dimensions: |
106 (l) x67 (W) x28 (h) mm |
| Weight: |
167g (0.37 lbs) |
|
Micro DAC is a USB digital-to-analog (DAC) converter with two outputs, one analog and one digital (optical). Itʼs ideal for converting the audio from your computer into a high-quality analog format without needing to carry anything larger than a flash drive. The sound quality available from the typical headphone jack on a portable device or coming from the standard-issue soundcard found in virtually every computer leaves a lot to be desired. Micro DAC delivers a marked upgrade in sound quality, compared to just plugging your headphones directly into your unitʼs headphone jack.
Use the 1/8-inch analog output to connect any headphones, and enjoy vibrant high-fidelity sound. There is a gain switch that boosts the signal level, so you can drive even high-impedance headphones to a robust loudness level. And since virtually all high-quality audio equipment has an optical digital input, Micro DACʼs optical digital output is perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.
Micro DAC has a rugged aluminum housing and is USB-bus-powered. Getting professional-quality audio from your computer couldnʼt be easier!
- Aluminum housing for ruggedness while traveling
- 1/8" headphone output
- 1/8" coaxial digital output
- Gain switch for high-impedance headphones, to easily drive any model
- Slim, small design for portability
- Professional audio quality
- 16-bit/48kHz audio conversion over a USB connection
- USB-bus-powered
Requirements - Windows 7 - Windows 10 Compatible
- OSx 10.7.5 - 10.11 Compatible
| ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE
This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan.
HDMI Male to VGA Female Video Converter Adapter Cable for PC Laptop HDTV Projectors and other HDMI Input Devices:
- Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
- Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
- With this version, we added a standby function to lower the energy consumption
- On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
- Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
- More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal
|
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS
The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters.
This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier.
Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection.
Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features
Twin Wolfson WM8740 24-bit DACs used in dual differential configuration
New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology
Optional digital preamp mode allowing connection directly to power amp or active speakers
24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes
Selectable digital filters - linear phase, minimum phase and steep
Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs
Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz
Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced
Frequency response 20Hz to 20kHz (±0.1dB)*
THD @ 1Khz 0dBFs |
- With 2.4G WiFi, Mirascreen G7M wireless display dongle is powered by brand-new chipset AM8268. Provides faster reaction speed and stable performance.
- Support mirroring and streaming your mobile devices to TV or projector or any HD display wirelessly. Turn your HDTV into a smart TV, use your mobile devices as the controller.
- Works with smartphones and tablet, suitable for Android and iOS OS. You can enjoy wireless display with your smart devices.
- Suitable for Miracast, DLNA, for Airplay to sync cast photo, video, music, office files, web browser, live camera from for iPhone and Android smart phone or tablet PC to large screen TV or Projector via WiFi, designed for PowerPoint presentation and video meeting.
- With HD interface, supports 1080P ultra HD wireless video transmission. Bring you ultra-clear visual enjoyment.
|
Reviews
There are no reviews yet.