Content |
- DAP AUDIO Speaker Diaphragm
- Replacement for CX10
- Voice coil: 1.35" (34.4mm)
- Diameter: 63.0 mm
- Length: 83 mm
- Impedance: 8 ohm, DCR: 6.2 ohm
- Titanium dome
- Fits Driver and Cabinet Models: CX8, CX10, FANE CD130 / BEHRINGER ASP12, ASP15 / GEMINI GX1200
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
B40365 |
VC Diameter |
34.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
CCAR/ALR/SV |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
63 mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
FANE CD.130 and CD.131 Replacement Diaphragm
Replacement diaphragm for Fane\'s CD.130 and CD.131 compression drivers.
Voice coil diameter 34mm
Frame diameter 64mm
Width at widest point (across terminal lugs) 83mm
Distance between terminal post centres 72mm
Overall thickness of frame 4.5mm |
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
|
This genuine JBL replacement diaphragm is compatible with the 2450J, 2446J, and 2447J horn drivers. JBL part number D16R2450.
| Original JBL D8R2431 Diaphragm to repair the 2431H Driver (339894-002X). 8 ohm
Diaphragm Comes with Ferrofluid and Allen Key.
Here is the list of some cabinet model use:
AE Series: AM6200/64-WH, AM6200/95-WH, AM6212/00-WH, AM6212/64-WH, AM6212/95-WH, AM6215/64-WH, AM6215/95-WH, AM6315/64-WH, AM6315/95-WH, AM6340/64-WH, AM6340/95-WH
Precision Directivity Series: PD5200/43-WH, PD5200/64-WH, PD5200/95-WH, PD5212/43-WH, PD5212/64-WH, PD5212/95-WH, PD5322/43-WH, PD5322/64-WH, PD5322-95-WH, PD743, PD764
SRX Series: SRX712M, SRX715/F, SRX738/F VLA Series: VLA301, VLA301H, VLA601, VLA601H, VLA901, VLA901H
Vertec Series: VT4888, VT4888DP-AN/CN/DA |
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Reviews
There are no reviews yet.