Διαθέτει κύκλωμα προστασίας από υπερθέρμανση, παρεμβολές και άλλα
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
PRICE PER UNIT
S2X
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer
Number
1
Basket Ø
7.5" (186 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
35 Hz - 50 kHz
THD > 80 Hz
≤0.8 %
Long term output
≥110 dB
Max. peak
≥120 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
23.8 lb (10,8 kg)
Magnetically shielded
Optional
Height x Width x Depth
14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer
Ultra-linear studio monitor with true active design
Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
High-precision crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions
Separately controlled limiter for low and high frequency overload protection
Magnetic shielding allows placement near computer monitors
“Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
High-quality components and exceptionally rugged construction ensure long life
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.