| Content | 10g dj style 1/2”-mount cartridge headshell
This headshell for 1/2”-mount cartridges and 4-pin turntable arm (Audio-Technica, Technics, SME) features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with colour-coded headshell lead wires and cartridge mounting screws, nuts and washer.
- All metal construction with integral finger lift
- Rubber washer for secure fit to tone arm
- Color coded lead wires and cartridge mounting hardware
- No tilt adjustment
- No overhang adjustment of the headshell on the arm (cartridge overhang adjustment is provided by the two slots on the headshell)
|
Technical data
Output voltage at 1000 Hz, 5cm/sec. 1.5 mV
Frequency range at - 3dB 20-18.000 Hz
Frequency response 20-15.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 60 µm
Compliance, dynamic, lateral
Stylus type Spherical
Stylus tip radius R 65 µm
Tracking force range 4.0-5.0 g (40-50 mN)
Tracking force, recommended 4.5 g (45 mN)
Tracking angle 20°
Internal impedance, DC resistance 6 Ohm
Recommended load impedance > 100 Ohm
Cartridge body material Grinded wood
Coilwire material High Purity Copper (OFC)
Cartridge colour Black
Cartridge weight 35 g
| Technical data
Output voltage at 1 kHz 5 cm/sec 0,45 mV
Channel balance
Channel separation at 1 kHz > 23 dB
Channel separation at 15 kHz > 15 dB
Frequency range at -3 dB 20 Hz - 50 kHz
Frequency response 20 Hz - 20 kHz +3/-1
Tracking ability at 315 Hz at recommended tracking force *) 80 μm
Compliance, dynamic, lateral 12 μm/mN
Stylus type Nude Fine Line on Alu cantilever
Stylus tip radius r/R 8/40
Tracking force range 2,2-2,7 g (22-27 mN)
Tracking force recommended 2,5 g (25 mN)
Tracking angle 20º
Internal impedance, DC resistance 5 Ohm
Recommended load impedance 50-500 Ohm
Cartridge body material Stainless steel Aluminium
Cartridge colour Red/Black
Cartridge weight 10,7 g |
Technical data
Output voltage at 1000 Hz, 5cm/sec. 0.2 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 25 dB
Channel separation at 15 kHz > 20 dB
Frequency range at - 3dB 20-60.000 Hz
Frequency response 20-20.000 Hz + 1,5 / - 0 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 8 µm/mN
Stylus type Nude Ortofon Replicant 100
Stylus tip radius r/R 5/100 µm
Tracking force range 2.5-3.5 g (25-35 mN)
Tracking force, recommended 3.0 g (30 mN)
Tracking angle 20°
Internal impedance, DC resistance 6 Ohm
Recommended load impedance > 100 Ohm
Coilwire material Goldplated Silver
Cartridge colour Blue/Gold
Cartridge weight 13 g |
13g TechniHard™ adjustable headshell with AT6101 quad wire.
- Adjustable overhang and adjustable azimuth (tilt)
- Threaded headshell avoiding in use of nuts when fitting cartridge
- 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
- 1 hexagon wrench (for overhanging and tilt adjustment)
|
The LH-6000 is a high quality headshell designed specifically for the Kontrapunkt, Jubilee, and Windfeld cartridges. Its rounded front portion facilitates proper mounting and compliments each of these cartridges.
|
Reviews
There are no reviews yet.