| Content | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
| Type |
closed-back, dynamic headphones |
| Sensitivity |
91 dB/mW, 104 dB/V |
| Frequency range |
16 to 28,000 Hz |
| Rated impedance |
55 ohms |
| Max. input power |
200 mW |
| Earpads |
leatherette und velvet |
| Cable |
3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) |
| Connector |
gold plated stereo mini jack |
| Adapter |
gold plated 1/8" to 1/4" screw-on adapter |
| Net weight (without cable) |
240 g (8.5 oz.) |
| Shipping weight |
550 g (19.4 oz.) |
| Patent(s) |
Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
|
Operating Principle: Closed
Transmission Type: Wired
Earpad material: Protein leatherette cover, memory foam filling
Nominal Impedance Headphones: 32 ohms
weight headphones without cable: 360 g
Headphone frequency response: 5 - 50,000 Hz
Nominal sound pressure level: 100 dB (1mW)
Sound coupling to the ear: Circumaural (around the ear)
Cable & Plug: 1.40 straight cable (double-sided), OCC 7N copper, textile braided, 3.5 mm jack plug with 6.35 mm jack adapter
| DT770 Closed reference headphone for control and monitoring applications (optionally with limiter).
The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time.
▲ Closed, diffuse-field studio headphone
▲ "Bass reflex" technology for improved bass response
▲ Comfortable fit due to rugged, adjustable, soft padded headband construction
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Single-sided cable
▲ NEW - Limiter (Optional)
▲ Velour, circumaural ear pads
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
250 ohms |
| Headphone frequency response |
|
5 - 35.000 Hz |
| Nominal sound pressure level |
|
96 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
270 g |
|
Reviews
There are no reviews yet.