| Content |
Designed for studio, broadcast and mobile applications, the ATH-M60x on-ear professional monitor headphones utilize the same proprietary 45 mm large-aperture drivers found in the legendary ATH-M50x headphones, delivering exceptional clarity throughout an extended frequency range with accurate bass response. The low-profile, closed-back, on-ear design provides excellent sound isolation and a great fit, which is enhanced by the exceptional comfort and durability of the memory foam earpads and headband. The headphones come with three interchangeable cables (1.2 m - 3.0 m coiled, 3.0 m straight, and 1.2 m straight – each with a 3.5 mm (1/8“) mini-plug), a 6.3 mm (1/4“) screw-on adapter, and a protective carrying pouch.
| Type |
Closed-back dynamic |
| Driver Diameter |
45 mm |
| Magnet |
Neodymium |
| Voice Coil |
CCAW (Copper-clad aluminum wire) |
| Frequency Response |
15 - 28,000 Hz |
| Maximum Input Power |
1,600 mW at 1 kHz |
| Sensitivity |
102 dB |
| Impedance |
38 ohms |
| Weight |
200 g (7.1 oz), without cable and connector |
| Cable |
Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable |
| Accessories Included |
Protective carrying pouch, 6.3 mm (1/4“) screw-on adapter |
|
The SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass in a sleek, attractive design. Made for mastering and critical listening, the premium padded headband with steel frame offers hours of listening comfort.
The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.
40 mm Neodymium drivers deliver full-range audio with rich, controlled bass
Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field
Impedance optimized for direct connection to wide range of portable audio devices
Fully adjustable, premium padded headband with steel frame and sleek, ergonomic design for hours of listening comfort
Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability
Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement
Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort
Individually tested and serialized
Legendary Shure durability to withstand the rigors of everyday use
Type
Open-back, circumaural
Frequency Range
15 Hz – 27 kHz
Cable Length
6.9 ft (2.1 m)
Plug
Gold-plated 1/8" (3.5 mm) stereo mini-jack
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual
| Beyerdynamic DT 150
The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios
and other audio monitoring applications where size, comfort and performance are primarily requirements.
Due to its closed design it features excellent ambient noise isolation for reference monitoring.
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 5 - 30,000 Hz
- Nominal impedance: 250 Ω
- Nominal SPL: 97 dB
- Power handling capacity: 100 mW
- Sound coupling to the ear: Circumaural
- Headband pressure: 4.5 N
- Ambient noise attenuation: approx. 20 dBA
- Weight (without cable): 250 g
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
| DT 990 PRO
Professional headphone for studio applications, open
Features
Open, diffuse-field systems
Professional version of the oftentimes awarded DT 990
Excellent sound reproduction
Robust spring steel headband
Single-sided cable
Soft replaceable ear cushions
Gold plated stereo mini jack and 1/4" adapter
Technical Specifications
Transducer type Dynamic
Operating principle Open
Weight without cable 250 g
Frequency response 5 - 35,000 Hz.
Nominal impedance acc. to IEC 60268-7 250 Ω /System
Nominal SPL acc. to IEC 60268-7 > 96 dB
Nominal THD acc. to IEC 60268-7
Power handling capacity acc. to IEC 60268-7 100 mW
Sound coupling to the ear Circumaural
Average pressure on ear acc. to IEC 60268-7 3.5 N | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
Reviews
There are no reviews yet.