| Content |
The industry standard for affordable instrument microphones, the MB 2k features a unidirectional dynamic element design for outstanding off-axis rejection and feedback control. Its frequency response is tailored for optimal instrument pickup. This rugged, all-metal mic is equipped Audio-Technica's Hi-ENERGY® neodymium magnet structure for maximum output and fast transient response, with noise-reducing soft-touch finish, MagnaLock™ switch design for silent on/off operation, and a corrosion-resistant gold-plated XLRM-type connector.
Smart-priced introductory microphone for amplified and acoustic instruments
Tailored frequency response for optimal instrument reproduction
Unidirectional dynamic element design
Rugged all-metal construction
Hi-ENERGY® neodymium magnet for improved output and transient response
Soft-touch finish reduces mechanical noise
Silent on-off operation thanks to MagnaLock™ switch design
Corrosion-resistant gold-plated XLRM-type connector
Element: Neodymium Dynamic
Polar Pattern: Unidirectional
Frequency Response: 60-14,000 Hz
Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa
Impedance: 600 ohms
Switch: MagnaLock™ on/off
Weight: 11.9 oz (337 g)
Dimensions: 7.23" (183.6 mm) long, 1.63" (41.4 mm) head diameter
Output Connector: Integral 3-pin gold-plated XLRM-type
Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
|
NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.
Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.
Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutters
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
|
The DMK57-52 Drum Mic Kit is a conveniently packaged selection of microphones and mounts, designed to offer a complete core package of microphones for recording and performing drummers at a great price. The Drum Mic Kit includes three SM57 microphones, one Beta 52 microphone, three A56D drum-mounting systems, and a lightweight and durable carrying case.
The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.
Perfect for the kick drum, the supercardioid Beta 52? derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52 is additionally designed with an integral locking stand mount for quick-and-easy set up.
A key element of the kit, Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere -- on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments. | The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments.
Features
Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount
Delivery Includes
1 e 604
1 drum clip
1 pouch
Technical Data
Frequency Response 40.....18000 Hz
Sensitivity in free field, no load (1kHz) 1,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 33 x 59 mm
Weight w/o cable 60 g |
Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.
The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.
The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.
Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.
The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).
Features:
- Identical acoustics of the legendary CK 1.
- Rugged construction.
- Ruler-flat on-axis frequency response.
- Precise, nearly frequency independent cardioid.
- Extremely accurate signal transfer.
- Transformerless output stage for minimum distortion at low frequencies.
- Protected against electrostatic and magnetic interference.
- Selectable 10-dB and 20-dB preattenuation pads.
- Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
- Operates on phantom power to DIN/IEC between 12 V and 48 V.
- Complete with SA 40 stand adapter and W 90 windscreen.
- Each microphone comes with its own individual frequency response plot.
Specifications:
- Polar pattern: Cardioid
- Frequency range: 20 to 20,000 Hz
- Sensitivity: 9 mV/Pa (-41 dBV)
- Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
- Equivalent noise level (CCIR 468-3): 29 dB
- Equivalent noise level: 18 dB-A
- Signal/noise ratio (A-weighted): 76 dB
- Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
- Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
- Impedance: 1000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN 45596
- Current consumption:
|
Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin
Made in Germany
Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!
Flexible tool iN The studio
The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.
|
Reviews
There are no reviews yet.