| Content |
This affordable cardioid dynamic microphone is designed for close-up vocal performance. The PRO31QTR offers a broad frequency response and low handling noise in a tough, durable design that delivers consistent performance on the road. The mic sets price/performance standards for intelligibility, transparent sound quality and noise suppression. Available in two models for easy use with consumer and pro electronics: PRO31 (XLRF-XLRM cable) and PRO31QTR (XLRF- ¼" cable).
- Close-up vocal performance microphone sets price/performance standards for intelligibility, transparent sound quality and noise suppression
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Hi-ENERGY® neodymium magnet for high output and articulate vocal reproduction
- Two-stage ball-type headcase for superior "pop" protection
- MagnaLock™ on/off switch
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged design and construction for reliable performance
- Element: Dynamic
- Polar Pattern: Cardioid
- Frequency Response: 60-13,000 Hz
- Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
- Impedance: 600 ohms
- Switch: MagnaLock™ on/off
- Weight: 11.0 oz (312 g)
- Dimensions: 7.28" (185.0 mm) long, 2.09" (53.1 mm) head diameter
- Output Connector: Integral 3-pin XLRM-type
- Cable: 15.0' (4.5 m) cable with XLRF-type connector at microphone end, 1/4" connector at equipment end
- Accessories: AT8470 Quiet-Flex® stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch
| The P 3 S microphone is ideal for backing vocals, guitar, wind instruments and many other applications. It has a metal case and wire mesh grill to ensure exceptional ruggedness.
Key Features:
- Rugged performance microphone designed for backing vocals and instruments
- Rugged wire mesh cap with internal windscreen
- Die-cast metal body
- Complete with stand adapter and zip bag
- On/Off switch
Specifications:
- Polar pattern Cardioid
- Frequency range 40 to 18,000 Hz
- Sensitivity 2.5mV/Pa
- Max. SPL 144 dB SPL
- Recommended load impedance >=2,000 ohms
| Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter |
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
| Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 16 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms (290 Ohms Actual) |
| Output Connectors |
XLR-3 Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
9.92 oz. (278 g) |
|
The E-845S is a high-performance super-cardioid lead vocal microphone with an extended high-frequency response, specially designed for stage use.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 46 x 185 mm
Weight : w/o cable 330 g
| The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
- Pneumatic shockmount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant microphone clip that rotates 180 degrees
- High quality, rugged, and reliable
- Cardioid dynamic
- Frequency response: 50 Hz to 15 kHz
Suggested Applications
Lead Vocals
Backup Vocals
Harmonica
| Frequency Range |
50 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
Reviews
There are no reviews yet.