Audio Technica PRO8HEx Hypercardioid Hi-ENERGY® dynamic headworn microphone

Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO8HEx is ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance. Its low-visibility headband and cushioned support pads provide a stable, comfortable fit. Designed for professional quality vocal pickup with hands-free operation, the PRO8HEx features a pivot-mounted flexible mic boom that descends from either the left or right side.

• Ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance
• Low-visibility headband and cushioned support pads provide a stable, comfortable fit
• Pivot-mounted flexible mic boom descends from left or right side
• Hypercardioid polar pattern improves isolation of desired sound source
• Hi-ENERGY® neodymium element for articulate vocal reproduction
• 7.2\' (2.2 m) cable permanently attached between microphone and XLRM-type connector
• Also available as: PRO8HEcW - 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
• ement: Dynamic
• Polar Pattern: Hypercardioid
• Frequency Response: 200-18,000 Hz
• Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
• Impedance: 600 ohms
• Weight: 2.1 oz (60 g)
• Output Connector: 3-pin XLR on cable
• Cable: 7.2\' (2.2 m) long, 0.11" (2.8 mm) diameter miniature audio cable permanently attached between microphone and XLRM-type connector
• Accessories: AT8139L large windscreen; AT8139S small windscreen; AT8439 clothing clip

The AKG C520L is a head-worn condenser microphone with maximum dynamic range for perfect vocal sound.

The AKG C520L can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.

The AKG C520L is an ideal choice for frontmen, singing keyboardists, drummers, guitarists, and dancers. The microphone arm mounts either on the left or right side of the headband as desired. Its cardioid polar pattern effectively rejects unwanted ambient noise. The C 520 provides the perfect solution for any performer needing a handsfree microphone.

A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.

AKG C520L main features include:

• Head-worn microphone with continuously adjustable behind-the-neck headband
• External shock mount for high mechanical-noise rejection
• Miniature gooseneck for precise positioning near the user's mouth
• Microphone arm provides choice of left or right-hand use
• Polar pattern: cardioid
• Frequency range: 60 Hz to 20 kHz
• Sensitivity: 5 mV/Pa (-46 dBV)
• Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
• Equivalent noise level: 31 dB-A
• Impedance: = 2000 ohms
• Connector:3-pin mini XLR
• Cable: C 520 L: 1.5 m (5 ft.)
• Finish: matte black
• Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
• Net weight: 26 g (0.9 oz.)

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)

Shure WBH54B Black Headworn Condenser Microphone

WBH54B is a subminiature, electret condenser head worn microphone. It provides uncompromised
sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring.
Despite their small size, the condenser element delivers full, clear, and natural reproduction of speech
and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for
stability and comfort. A plastic carrying case protects the microphone and its accessories.

Features:

Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
Extended frequency response tailored for vocal performances
Able to handle extremely high sound pressure levels (SPL)
Snap-fit foam windscreens stay in place during intensive movement
Available with an in-line preamp or with a TA4F connector for wireless applications
Black finish
TA4F connector for wireless applications

The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.

Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.

The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.

The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.

Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.

Included Accessories

• pop filter,
• clip,
• tool kit,
• anti trauma case,
• mini furry,
• micon cable

• Uni-directional Electret Condenser Headset Microphone
• Impedance
• Frequency range : 20Hz - 20 KHz
• Sensitivity : -44 ± 2 dB (at 1 KHz)