| Content |
Audio-Technica's PRO92cW wireless omnidirectional condenser headworn microphone offers a natural, smooth frequency response optimized for vocal articulation. The mic features a small condenser capsule; a lightweight, contoured earpiece; and a flexible boom that is easily repositioned for a comfortable fit. Terminated to fit Audio-Technica wireless systems, the PRO92cW is available in black or beige.
- Comfortable headset is ideal for lecturers and other applications requiring clear, articulate vocal projection
- Flexible, contoured earpiece hooks over either ear for a comfortable fit
- Natural smooth frequency response optimized for vocal articulation
- Rugged construction designed to stand up to the challenges of day-to-day use
- Includes storage pouch and clothing clip
- Available in black and beige models
PRO 92cW Specification Sheet 105 KB
PRO92cW Declaration of Conformity 199 KB
| Features
- Excellent feedback rejection
- Microphone includes a detachable cap as integral wind/popshield
- Individually adjustable to all head sizes
- Neckband design keeps the microphone clear from shirt-collar or clothing
- Twist-proof microphone boom (Ø 2.0 mm), can be attached to the left or right side
- Microphone boom is adjustable in length and angle
- Flexible gooseneck section
- Connection cable can easily be interchanged
- All metal parts coated in a physical vapour deposition process
- Can also be used with the omni-directional HSP 2 boom microphone
Delivery Includes
- Boom microphone
- Neckband
- Connection cable
- Plastic transport case, foam-lined with cut-outs
- Operating instructions
Technical Data
- Pick-up pattern cardioid
- Frequency response 40...20 000 Hz
- Nominal impedance (@ 1 kHz) 1000 Ohm
- Min. terminating impedance 4700 Ohm
- Sensitivity in free field, no load (1kHz) 4 mV/Pa
- Maximum sound pressure level (passiv) 150 dB
- Equivalent noise level 37 dB(A)
- Current consumption ca. 250 µA
- Operating voltage (stand alone) 4,5-15 V
- Cable length 1,6 m
- Diameter microphone head 8,4 mm
- Diameter boomarm 2,4 mm
- Weight 9,2 g (without cable)
| Headset Mikrofon for WS 100 Series, WS 1000 Series, WS 1616 Series and WS ECO Series
- Uni-directional Electret Condenser Headset Microphone
- Impedance
- Frequency range : 20Hz - 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Headsets
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,06 kg |
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g) |
General Specs:
|
Frequency Response:
| ..... | 20 - 20,000 Hz +/-3dB | |
Pick-Up Pattern:
| ..... | Omni-Directional | |
Nominal Impedance:
| ..... | 1000 Ohms at 1kHz | |
Min. Terminating Impedance:
| ..... | 4.7 K Ohms | |
Sensitivity:
| ..... | 2 mV / Pz | |
Diameter of Mic Capsule:
| ..... | 4.8mm | |
Max. SPL:
| ..... | 150 dB | |
Equivalent Noise Level:
| ..... | 28 dB (A) | |
Supply Current:
| ..... | 250uA | |
Power Supply:
| ..... | 4.5 - 15V | |
Cable Length:
| ..... |
1.6 m
| |
Diameter of Boom Arm:
| ..... | 1.1 mm | |
Weight of Boom Arm:
| ..... | 2.1 g | |
Connector:
| ..... | ew Connector | |
Weight Neckband:
| ..... | 4.4 g |
|
High-quality permanently polarized condenser headmic with omni-directional pick-up pattern
| Τype: | Headset | | Series Compatibility: | 3000/5000 Series |
|
Reviews
There are no reviews yet.