Content |
Our portable DAC and headphone amplifier will improve the sound quality of your music.
Whether you are listening via headphones on the bus or via your system on the sofa, the award-winning xDSD makes your music sound better.
Wireless. Wired.
The xDSD is for people who love to listen — on the go or at home.
You choose wireless via Bluetooth® or wired via USB or SPDIF.
Apple or Android, DAP, games console or TV, just connect the xDSD and enjoy the ultimate audio experience.
Hi-Res. Future-proof.
The xDSD plays high-quality digital audio file formats up to DSD512. Listen to your favourite tracks as they were meant to be.
In love with Hi-Res streaming? Listen to Tidal HiFi and Spotify Premium with ease.
The xDSD is also MQA ready straight out of the box. Use with Tidal Masters on your computer or mobile.
Bluetooth freedom
The convenience of Bluetooth® means your headphones connect to the xDSD, leaving your phone or chosen device wire free. Pop the xDSD in your pocket and it’s business as usual but with much better sound.
The xDSD boasts both aptX™ and AAC™ Bluetooth® for CD-like quality. With standard Bluetooth®, the sound quality drops by 30%, not so with the iFi Bluetooth® implementation. Just a little iFi magic for you!
Superior sonics
With amazing amplification, driven by 500 mW of power, the xDSD handles almost any headphones and it easily partners up with active home speakers.
And, of course, we’ve included our exclusive optional ‘sonic fine-tuning extras’ to add further nuances to your listening.
xBass+® cleans and restores the bass to give you a richer, deeper sound and 3D+® opens up your music to bring a live-concert atmosphere into your living room.
Perfectly balanced
iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.
On headphones this means lower distortion, less interference, and reduce crosstalk.
Smart. Stylish.
The battery lasts up to 10 hours and ‘smart’ tech ensures you enjoy optimum listening time adjusted according to your usage. The xDSD has a separate USB charging socket.
And finally, with its metallic chrome finish and elegant, ergonomic design, based upon the Japanese Zen garden, it puts the ‘x’ back into sexy.
Specifications
USB Input: |
up to PCM768kHz & DSD512 (24.6/22.6MHz) |
SPDIF Coaxial and Optical Input: |
up to 192kHz/24Bit |
Dynamic Range: |
> 113dB (A) |
Volume Control: |
-101dB…0dB in 1dB steps |
Output power: |
> 2.82V/500 mW @ 16 Ohm > 3.7V/270mW @ 50 Ohm > 3.8V/48 mW @ 300 Ohm > 3.8V/24 mW @ 600 Ohm |
Line out Level: |
> 2.1V @ 0dBFS (& 0dB Volume) |
THD &N (1V/16R): |
< 0.005% |
Output Impedance: |
< 1 Ohm |
Battery: |
3.8V/2200mAh |
Dimensions: |
95 (l) x67 (w) x19 (h) mm |
Weight: |
127g (0.28 Ibs) |
Warranty period: |
12 months |
| ”It makes a handsome difference to your on-the-go sound.” ’What Hi-Fi?’ 2019 award-winner.
Improve the sound of your smartphone
The Cyrus soundKey uses a top quality DAC (Digital to Analogue Convertor) built into an ultra-low power circuit that lets you hugely improve the sound of your smartphone or tablet without rapidly draining the battery. Using a much better DAC than the one built into most smartphones and tablets means music sounds more dynamic, detailed and true-to-life.
Compatible with Hi-Res music files
A further bonus with the soundKey is that it’s compatible with Hi-Res music files up to 24 bit/96kHz. This means that, as well as MP3 and AAC files, it will also replay your Hi-Res FLAC files. Hi-Res makes the music sound more natural, with subtle detail easier to detect.
Ultra-low power consumption
A key advantage with this DAC over others is the extremely low power consumption. With a battery drain of less than 50 milliamps – under half the maximum recommended by Apple for use with their iOS devices – the soundKey is kind to your phone’s battery. What this means is a much longer phone battery life than when using other mini-DACs. The device itself is also battery-free.
Works with Windows 10, Android 5+ and iOS9+
Compatible with Windows, Android and Apple devices the soundKey is suitable for just about any smartphone. Simply make sure you have the correct USB OTG (On The Go) connection (Apple Camera Kit connection for Apple iOS devices) and you’re good to go.
Compact, robust and light
Crafted using high quality brushed aluminium, the soundKey is both lightweight and strong. Its sleek design combined with its compact dimensions and mere 18g weight make it perfect for music on the move.
Unlock the key to great sound from your smartphone, with the Cyrus soundKey.
Brand Cyrus
Colour Graphite
USB Yes
Weight (KG) 18.1g
Bluetooth No
Dimensions WxDxH (mm) 23 x 8 x 54
High Resolution Audio Yes
Power Consumption- Normal Use Under 50mA
Optical Digital Inputs No
DAC Texas Instruments PCM5102 |
The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters. This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier. Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection. Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features Twin Wolfson WM8740 24-bit DACs used in dual differential configuration New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology Optional digital preamp mode allowing connection directly to power amp or active speakers 24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes Selectable digital filters - linear phase, minimum phase and steep Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced Frequency response 20Hz to 20kHz (±0.1dB)* THD @ 1Khz 0dBFs |
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
Gain, MM / MC |
40 dB / 60 dB |
Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
Max. output |
9,5 V (1 kHz) |
Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
THD MM / MC |
<0,01% / <0,05% |
RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
Sampling rates |
32, 44,1 and 48 kHz |
USB output |
5 pin Mini b Buchse |
USB signal |
digital serial data protocol USB 1.1 |
Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
Input / Line output |
1 pair RCA/Cinch sockets each |
Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
Power consumption |
100 mA DC |
Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
Weight |
250g without power supply |
| ARTSOUND VD-242 VGA HDMI Adapter Cable 3.5mm Audio Video Converter Cable TV Box PS3 PS4 HDTV PC Laptop ProjectorVGA To HDMI Cable
- Application:Projector,Computer,Multimedia,Monitor,TV BOX,Television
- Shielding:Braid
- Gender:Male-Female
- Connector A:VGA,AUX
- Model Number:VGA To HDMI Adapter with Audio
- Type:VGA Cables
1. Main function: This product can bring computer PC, notebook, DVD player, etc.
VGA signal, processed by smart chip, to connect the device to HDMI
On the high-definition display device of the interface, it converts an analog signal into a digital signal.
HD converter to enjoy the high-definition video and feast.
Features:
1. One way VGA analog video; standard HDMI digital signal output, usb charging
With audio
2. Support VGA video input format: VGA, XGA, SVGA, SXGA, UGA
3. Support audio format: Analog Stereo 2.1 (FL/FR)
4. HDMI output format: up to 1080P/60Hz (output and input format synchronization, frequency synchronization)
5. Support HDCP 1.2 version
6. Easy to install, no driver required, plug and play
7. Low power consumption, externally powered by USB to Micro power cord
8. High-grade aluminum alloy casing, black appearance, simple and generous
9. Small size, strong mobility, easy to carry out
Package Included:
1 x VGA to HDMI Adapter With Audio
|
Reviews
There are no reviews yet.