Content | Features
Desktop or portable digital-to-analog convertor
Mac or PC plug-and-play, no drivers to install
High-performance headphone amp included
USB and optical inputs
USB-powered, no separate power supply needed
Stream bit-perfect HD audio with low jitter
Based on high-performance AK4396 DAC
Works With
Any computer (Mac or PC)
Headphones
Apple TV or any product with optical outputs
Powered speakers
Any audio system with mini-jack or RCA inputs
DAC type
Dual Mode USB and Optical (SPDIF)
Inputs
USB/Optical (SPDIF)
Outputs
RCA stereo/3.5mm headphone
D/A converter
AKM4396
Optical receiver
CS8416
USB controller
TI1020B
USB device class
Type 1.1 or above
Full-scale output
2.0V RMS
Output impedance
10 ohms
Power source
USB 5V
Power requirements
5V DC, 200mA
USB power filtering
2-stage redundant regulation
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) |
Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.
- Audiophile Bluetooth Music Converter
- High quality music replay from mobile devices
- Burr Brown PCM5102 24bit DAC
- Uses aptX™ streaming technology
- High-end audio circuitry and components
- High quality cast aluminium casework
The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.
Technical Specifications
- DAC: TI PCM5102
- Frequency response: 10Hz — 20kHz, ±0.1dB
- Total Harmonic Distortion: + Noise 0.002%
- Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
- Line output level: 2.15Vrms
- Supported CODECs: SBC, AAC, aptX®
- Power requirements: 0.7W max
- Dimensions (wxdxh, mm): 75 x 100 x 26
- Weight: 350g
| Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
Features
- For use with DN-202WR
- Sends audio up to 30m (100 ft) without wires
- XLR and 1/4” audio inputs
- Able to broadcast to multiple receivers (sold seperately)
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
Package Contents
- DN-202WT
- Power adapter (5VDC, 3A, center-positive)
- User Guide
- Safety and warranty manual
|
- For NAVIS Series Speakers
- Wireless Source-to-Speaker Connection
- Sends Uncompressed Audio
- 5 Hz to 22.1 kHz Frequency Range
Go wireless with the AirX2 NAVIS Transmitter from ELAC. Using 2.4 GHz wireless technology, the AirX2 NAVIS offers you the freedom to connect your source to your NAVIS speakers easily and without running unsightly cables across the room. It transmits uncompressed audio and is equipped with a pair of RCA inputs for easy connection to your audio source. Included in the package is a power adapter and a set of international AC plugs.
Wireless
Transmitter Interfaces
Input Connectors |
1 x 2RCA (Stereo Analog) Female |
Power
Power Connector |
1 x Barrel (7.5 VDC) Input |
General
Dimensions |
3.7 x 3.62 x 1.54" / 94 x 92 x 39 mm |
Weight |
0.44 lb / 0.2 kg |
|
The new irDAC-II continues the story adding Bluetooth connectivity, headphone output and DSD128 support. The irDAC-II comes packed with cutting edge technology and features that will benefit the most demanding user. We have gained a lot of knowledge developing class leading DACs. Areas like isolation of the digital and analogue stages, ultralow noise power supplies and a direct coupled signal path make a big difference. We use the outstanding ESS Sabre DAC to obtain performance that we believe will be unmatched in this price category. Jitter reduction is an obsession within our engineering team. They have applied their experience in the irDAC-II to produce a signal that is almost jitter free. The headphone output stage has been taken from the flagship A49 amplifier and is capable of driving the most demanding of headphones. Both fixed and variable line outputs are also available, allowing for ultimate system building flexibility.
The irDAC-II is designed to be the heart of a digital system and can be connected to a host of different types of digital sources and connections. This includes asynchronous USB and Bluetooth. All of the inputs can be controlled through an IR remote that will also give you transport control of a PC or Mac USB source via the HID (Human Interface Device) control.
• Mini component wireless DAC • High performance headphone amplifier • AptX Bluetooth wireless streaming • ESS ES9016 Sabre DAC chipset • High precision digital reclocking • Up to 24/384 via USB • Up to 24/192 via coax • Up to 24/96 via optical • DSD128 via USB • Isolated digital and analog direct coupled circuits • Individually regulated power supplies • 2x digital coax inputs Fixed and variable • Headphone output (30 to 600Ω) • 4 layer PCB • Aluminum case with non‐slip rubber base • 12V external power supply included • Mini remote control included • Weight: 2.4 lbs (1.1kg) • Packaged weight: 5 lb (2.1 kg) • Packaged dimensions (W x D x H): 10.1\'\' x 12.1\'\' x 2.3\'\' (260 x 310 x 60mm) • EAN: 506013360254‐5
Supported sample rates:
- USB: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 384kHz
- Optical: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Coaxial: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Bluetooth: SBC, AAC, aptX, aptX:LL
- Bit Depth : 16:bit, 24:bit
- Headphone : 30Ω : 600Ω, 3.5mm plug
- Power requirements: 18W max
- Dimensions: W194 x H44 x D124mm
- Weight: 1.1kg
|
Transmits both pre-amp out and LFE signals
Eliminates subwoofer cables, sending uncompressed bass signals to your subwoofer
Has an external antenna for up to 50 feet of high-quality transmission
Transmitter dimensions: 1" x 5" x 3“
Receiver dimensions: 2-3/4" x 1-3/4" x 1-3/4“
Converts any of the subwoofers
Pro440wi- Pro550wi – Pro660wi literally in seconds. |
Reviews
There are no reviews yet.