Content | Features
Desktop or portable digital-to-analog convertor
Mac or PC plug-and-play, no drivers to install
High-performance headphone amp included
USB and optical inputs
USB-powered, no separate power supply needed
Stream bit-perfect HD audio with low jitter
Based on high-performance AK4396 DAC
Works With
Any computer (Mac or PC)
Headphones
Apple TV or any product with optical outputs
Powered speakers
Any audio system with mini-jack or RCA inputs
DAC type
Dual Mode USB and Optical (SPDIF)
Inputs
USB/Optical (SPDIF)
Outputs
RCA stereo/3.5mm headphone
D/A converter
AKM4396
Optical receiver
CS8416
USB controller
TI1020B
USB device class
Type 1.1 or above
Full-scale output
2.0V RMS
Output impedance
10 ohms
Power source
USB 5V
Power requirements
5V DC, 200mA
USB power filtering
2-stage redundant regulation
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) |
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
| The best of all worlds - amazing sound, effortless wireless streaming with AirPlay®, a LightningTM connector for docking the latest generation of iPhones® and iPods® and a design that fits almost anywhere. Versatility, convenience and stunning performance; Z2 is the dock that has it all.
Model |
Z2 |
Description |
Wireless Music System |
Technical features |
Apple® AirPlay® technology
Lightning connector
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
FlowportTM
Remote control |
Drive units |
2x 87.5mm (3.5in) full range |
Frequency response |
50Hz - 20kHz ±3dB on reference axis |
Frequency range |
-6dB at 42Hz and 22kHz |
Amplifier power output |
2x 20W |
Input voltage |
100V - 240V ~ 50/60Hz |
Rated power consumption |
36W |
Standby power consumption |
|
| Audioengine B2 Premium Bluetooth Speaker
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly
stream all your music from any Bluetooth®-enabled device. Your
computer, iDevice, or Android phone already has Bluetooth, so get more
out of your music with the B2 wireless speaker. Experience award-winning
Audioengine® stereo sound, including a hand-built wood cabinet,
Bluetooth® aptX® and extended wireless range.
Easy setup
Setup
and pairing is really easy and no special software is needed. Hereʼs
how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
Versatile
The
audio quality of most Bluetooth products isn't usually very inspiring
and their limited range can be frustrating. The B2 solves these problems
by implementing the aptX codec, which is a high-quality audio converter
designed specifically for audio. The B2 also has special circuitry and a
precision-tuned antenna to extend the wireless range, providing much
more versatility than other Bluetooth speakers.
Upgrade your Bluetooth
You
already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B2
Bluetooth Speaker including aptX, extended range, hand-built wood
cabinet, and custom speakers.
See and hear the difference
The
hand-finished all-wood cabinet of the B2 reflects traditional
Audioengine design and the high-quality components and audio fidelity
are typical of Audioengine's commitment to great sound at affordable
prices. The Audioengine B2 continues to close the gap between your
computer music and home hi-fi and even if you're not an audio enthusiast
we guarantee your music will sound better!
Type |
Powered Bluetooth speaker |
Inputs |
Bluetooth, 3.5mm stereo mini-jack analog |
Power Output |
60W peak total |
Input Impedance |
10K ohms unbalanced |
Frequency Response |
65Hz - 22kHz (+/-2dB) |
SNR |
>95db (typical A-weighted) |
THD+N |
|
| The Bluetooth wireless receiver turns your old speakers into wireless Bluetooth speakers. Simply connect the wireless receiver to your speakers (AUX or RCA) and your phone or tablet to the wireless receiver via Bluetooth and enjoy your favorite music in great quality without the hassle of cables.
With the help of the Bluetooth Wireless Audio Receiver you can listen to music anywhere in your home, without the need to have your mobile phone permanently connected to the sound system, as it has a range of 15 meters (indicative range without obstacles).
It uses new electrical signal isolation technology to minimize noise and interference and provide you with crystal clear and crisp sound.
It also has a USB port to which you can connect a Flash Drive or hard drive with music files, and play them through your speakers.
The receiver has buttons (play, forward, back, volume) on the top to control playback and volume.
Product parameters:
Name: NFC Bluetooth Audio Receiver
Colour: Black
Material: ABS
Bluetooth version: V5.0+EDR
Bluetooth protocol: A2DP/AVRCP
Bluetooth distance: <15 meters
Interface: RCA/AUX/USB
Frequency range: 10Hz-20kHz
Signal to noise ratio: >110dB
Impedance: 75Ω
Support multiple audio output ports: can connect with 3.5mm headset, stereo system, speaker
Support USB 5V DC output, also can charge for iPad, for iPhone
System Support: All Bluetooth audio device; NFC available device
Package Included:
1*NFC Bluetooth Audio Receiver |
MusicCAST Desktop Wireless Client with built in IEEE802.11b for wireless communication with music server, Built-in Hi-Fidelity digital amplifier for any type of speaker configuration, On-screen video out for video monitor display, Subwoofer output for powered subwoofer, LAN (Ethernet) network connection and a Large LCD display for ease of use.
Wireless Digital Audio Terminal
The MusicCAST MCX-A10 clients provide a vast assortment of connections including speaker outputs, left/right audio pre-outs, subwoofer output, and video output so that you can view the on-screen display on a larger monitor.
MusicCAST Concept
* IEEE802.11b wireless communication with music server
* Built-in Hi-Fidelity digital amplifier for any type of speaker configuration
* On-screen video out for video monitor display
* Line-out audio output to connect to existing audio components
* Subwoofer output for powered subwoofer
* Audio input to connect additional source units
* LAN (Ethernet) network connection
* Large LCD display for ease of use
|
Reviews
There are no reviews yet.