AUDIOENGINE P4 Premium Passive Bookshelf Speakers 2-WAY Passive -PAIR-

4" 2-way passive, front ported design
Hand-built and custom finished
cabinets
5-way gold-plated binding posts
Silk dome tweeters and Kevlar woofers
Magnetically-shielded
Excellent performance for music and
movies
Wall mount, stand or shelf placement

System Format:    2 Way
Frequency Response:    42 Hz - 60 kHz
Sensitivity (1W@1M):    88 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    112.6 dBA
Power Handling (RMS):    120 W
Recommended Amplifier Requirements (RMS):    60 - 120 W
Bass Alignment:    Bass reflex. HiVe port system
Crossover Frequency:    2.7 kHz
Drive Unit Compliment:    1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands:    9.9 Kg (21.75 lbs)

System Format: 2 Way
Frequency Response: 42 Hz - 60 kHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 60 - 120 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.7 kHz
Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands: 9.9 Kg (21.75 lbs)

AVAILABLE IN SIX COLOR FINISHES

Dimensions | Metric :4-3/4" W x 5" D x 8-3/8" H | 12.1 x 12.7 x 23.8 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 4-1/2" BDSS bass/midrange drivers; One 4-1/2" pressure coupled bass radiator
Frequency Response :57 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 150 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Included Accessories :Tripod Base; Two ¼ 20 insert cover plugs
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket mount(available separately); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 600/800 stand mounting (ProStand 600/800 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :4 lbs | 1.8 kg
Warranty :5 Years

Driver Complements
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Areated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Enhanced Ring Radiator Dynamic Balance tweeter
Electrical
Overall Frequency Response 36Hz-40kHz
Lower -3dB Limit 50Hz dB
Upper -3dB Limit 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 88 dB
Crossover Orth Crossover
Crossover
(mid-high array) 2800HZ
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16 3/4" H x 8" W x 14 9/16" D
(42.55cm H x 20.32cm W x 36.99cm D)
Mounting Options speaker stands or shelf mount
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort bass venting
Shipping/Other
Product Weight 29.60 lbs. (13.43kgs)
Shipping unit: each
Total Shipping Weight 32.50 lbs. (14.74kgs)
Speaker Warranty 5 years parts and labor (original purchaser)

ALSO AVAILABLE IN "EBONY" COLOR

The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.

The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.

The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.

The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.