Content | Designed to connect to virtually any device, the pair of walnut Audioengine HD6 Powered Speakers provide an analog RCA stereo input, a digital optical audio input, and ⅛" input. They consist of a 5.5" woofer and a 1" tweeter and can handle 50W per channel RMS, or 75W per channel peak. For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. In addition to the included speaker wire, an ⅛" audio cable, an RCA audio cable, magnetic removable grilles, and an IR remote are also included.
Custom Components Audioengine designs and manufactures their own speaker drivers and other critical components. In other words, the HD6 is not a "box-built" system with off-the-shelf parts, but includes custom-designed components constructed to their specifications. What they do not fabricate directly inside their factories, they have made to their specific designs - parts such as circuit boards, transformers, magnets, and wiring harnesses, for example. Efficient Integrated Design The speaker cabinets, drivers, bass port designs, amplifiers, and passive crossovers are all tuned together for the HD6. This, in turn, makes for a more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. Audioengine builds all this into the left speaker cabinet to make it easy to connect your smartphone, tablet, computer, TV, network player, or any other audio product. Built-In B1 and D1 Audioengine has taken features from the B1 aptX Bluetooth Receiver and the D1 24-bit DAC, and combined some of this circuitry inside the HD6. High-Quality Bluetooth Audio The Bluetooth built into the HD6 powered speakers features aptX coding, which is an advanced Bluetooth audio codec with enhanced sound quality. And even if your phone or tablet doesn't have aptX, the HD6 Bluetooth solution is backwards-compatible with SBC and AAC codecs, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music. Extended Bluetooth Range Most Bluetooth implementations have a range of 30', but with careful signal management circuitry and antenna tuning, the HD6 offers a solution that has up to a 100' range for multi-room use, with no degradation in audio quality. 24-bit DAC The HD6 Bluetooth receiver and optical input both utilize the AKM AK4396A DAC, which is designed to provide low noise and high fidelity. The optical input configures the AK4396A as a bit-perfect 24-bit DAC, which will process sample rates up to 192 kHz natively. For Bluetooth, the AK4396A is used as an upsampling DAC and will pad all bit depths to 24-bits, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the AK4396A, the fact that digital signal is upsampled to 24-bits, and the added benefit of onboard triple redundancy power source conversion and filtering, the HD6 Bluetooth implementation presents impressive low noise and low distortion characteristics. Amplifier Design The amplifiers in the HD6 are located in the left speaker and are a conservatively-rated class A/B analog monoblock design. This is a more traditional speaker/amplifier marriage, which is designed to provide high-quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection. Driver Designs Audioengine uses ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters are designed to hold up well under high power, and the edge-driven design gives a smooth response. The woofers are Kevlar woven glass aramid composite with rubber surrounds. The strength of Kevlar means the woofer retains its shape when being driven at high levels. The HD6 woofers are housed in cast aluminum frames, which provide high rigidity and increased heat dispersion. Power Transformers Audioengine uses gapless-core toroidal transformers, which have a tighter radiated magnetic field, translating to lower noise. They are lighter than standard "EI" transformers, and also generate less heat. Detachable Grilles The HD6 includes detachable grilles that are firmly held in place with hidden neodymium magnets for a clean look. Additional Features
- Dual audio inputs and full-range variable output
- Hand-built cabinets
- Threaded inserts to secure speakers to stands
- Passive crossovers
- Solid aluminum remote control
Speaker System |
Speaker Design |
2.0-channel powered bookshelf system |
Drivers |
1 x 5.5" (14.0 cm) Kevlar woofer, per speaker
1 x 1.0" (2.5 cm) silk dome tweeter, per speaker |
Amplifier Output |
RMS: 50 W per channel
Peak: 75 W per channel |
Amplifier Type |
Analog dual-class A/B monolithic |
THD + N |
95 dB (typical A-weighted) |
Crosstalk |
-50 dB |
Frequency Response |
50 Hz to 22 kHz, ±1.5 dB |
Connectivity |
Input Connector |
Left, Powered Speaker: 1 x Optical audio
1 x RCA L/R pair
1 x ⅛" (3.5 mm) mini-jack
1 x Power inlet
Right, Passive Speaker: 1 x Binding post variable line-in |
Output Connector |
Left, Powered Speaker: 1 x RCA L/R pair
1 x Binding post variable line-out |
Analog Input Impedance |
48 kOhms unbalanced (mini-jack and RCA inputs) |
D/A Converter |
AKM AK4396 |
Bluetooth |
Bluetooth Version |
Bluetooth 4.0 audio |
Supported Bluetooth Profiles |
aptX, AAC, SBC |
Bluetooth Range |
Up to 100' (30 m) typical |
Latency |
~30 ms |
Input Bit Depth |
24-bit upsampled |
Optical I/O |
Input Bit Depth |
Up to 24-bit native |
Input Data Rate |
Up to 195 Kbps native |
Physical and Environmental |
Environmental Requirements |
Operating Temperature: 32 to 95°F (0 to 35°C)
Non-Operating Temperature: -4 to 113°F (-20 to 45°C)
Relative Humidity: 5 to 95%, non-condensing |
Protection Features |
Output current limiting, thermal over-temperature, power on/off transient protection, replaceable external main fuse |
Power Requirements |
115/240 VAC, 50/60 Hz manually switchable |
Power Consumption |
Idle: 10 W
Mute: 6 W
Sleep: 4 W |
Dimensions |
Each Speaker: 11.75 x 7.25 x 10.0" (30.0 x 18.5 x 25.0 cm) |
Weight |
Left, Powered Speaker: 17.5 lb (8.0 kg)
Right, Passive Speaker: 12.5 lb (5.5 kg) |
|
Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch. System Format: 2 Way Frequency Response: 60Hz - 35kHz Sensitivity (1W@1M): 89dB Nominal Impedance: 6 Ohms Maximum SPL (dBA): 111.8 Power Handling (RMS): 80W Recommended Amplifier Requirements (RMS): 10-80W Bass Alignment: Sealed Cabinet Tweeter Crossover Frequency: 2.1kHz Drive Unit Complement: 1 x 6" RST® Bass/Mid driver. 2 x 1" (25mm) C-CAM® gold dome tweeters Product External Dimensions: (H x W x D) 250 x 300 x 120 mm (9 13/16 x 11 13/16 x 4 3/4 inch) Individual Weight: 4.69 Kg (10.38 lb) User's Manual Available in colors
|
System Format: 2 Way Frequency Response: 42 Hz - 60 kHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 60 - 120 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.7 kHz Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 362 x 210 x 303 mm (14 3/8 x 8 1/4 x 11 15/16 inch) Weight (each) Excluding stands: 9.9 Kg (21.75 lbs) AVAILABLE IN SIX COLOR FINISHES
| Two Way Bass Reflex Bookshelf Speaker System
Yamaha\'s NS-333 speaker system has been designed specifically for home theater applications. The bookshelf speaker is a bass-reflex design that can be used for main or surround channels and incorporates a 5\' Polymer-Injected Mica Diaphragm (PMD) cone woofer and a 1” aluminum dome tweeter. For improved imaging, the tweeter utilizes Yamaha’s exclusive waveguide horn.
Waveguide Horn
Unlike most homes, movie theaters use sound absorbing materials on walls and ceilings. The result is that the sound reaching your ears is the sound wave produced by the speakers rather than reflected off the walls. Yamaha has created wave guides that greatly reduce reflected sound and increase the proportion of directly generated sound waves reaching your ears. The result is a clear and precise sense of sound direction and placement.
Internally Wired with Monster Cable™
Yamaha has chosen to ensure optimum sound quality by internally wiring some of the components with Monster Cable™. This ensures a clean, clear signal from the crossover network to the speaker driver.
Magnetic Shielding
The speaker is magnetically shielded, so it can be placed on a TV or video monitor without degrading the picture via stray magnetic fields.
Performance Enhanced by a Handsome Cabinet
The EF series speakers are enclosed in an Elliptical Form cabinet with a high gloss black piano finish, which provides solid construction with minimal sound diffraction.
New Grill Design
New grill design and grill cloth provide an attractive and acoustically transparent protective cover for the drivers.
ΝΟΤΕ : The price is valid per piece and not per pair.
Selling Unit: |
Piece |
Type: |
2-Way Bass-Reflex Bookshelf Speaker System |
Featured Technologies: |
- |
Tweeter: |
2,5 cm aluminum dome with Waveguide |
Midrange: |
- |
Woofer: |
13 cm (5\') PMD |
Power: |
150 W/60 W |
Resistance: |
6 ohms |
Frequency Response: |
60 Hz-35 kHz |
Sensitivity: |
87 dB/2.83 V/1 m |
Crossover Frequencies: |
3 kHz |
Auto Standby Operation: |
- |
Filters: |
- |
Remote Control : |
- |
Dimensions (W x H x D): |
200 x 320 x 213 mm |
Weight: |
5,5kg/piece |
|
Woven Kevlar
Crossover Tuning
Nautilus Tapering Tube
Flowport
Technical features Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone bass/midrange
Flowport™
Description 2-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø165mm (6.5 in) woven Kevlar® cone bass/midrange
Frequency range -6dB at 45Hz and 50kHz
Frequency response 52Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 88dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
|
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
Reviews
There are no reviews yet.