Content | Audioengine B1 Premium Bluetooth® Music Receiver
B1 is a high-fidelity audio component that easily integrates into
your music system and plays music directly from your library or streams
from any app. The B1 streams high-quality audio from your
Bluetooth®-enabled smartphone, computer, or tablet to any music system
or powered speakers.
Easy setup
The B1 is a simple way to get great-sounding wireless music from
your device out to any music system. Setup and pairing is really easy
and no special software is needed. Hereʼs how to connect B1 to your
music system and pair with your tablet, computer, or smartphone:
Connect the included audio cables from the B1 rear panel to your music system.
Connect the included power adapter to B1 and plug into an AC outlet. B1 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B1” to pair and connect.
Play your music. Setup is really this easy!
Versatile
The audio quality of most Bluetooth products isn't usually very
inspiring and their limited range can be frustrating. The B1 solves
these problems by implementing the aptX codec, which is a high-quality
audio converter designed specifically for audio. The B1 also has special
circuitry and a precision-tuned antenna to extend the wireless range,
providing much more versatility than other Bluetooth receivers.
Upgrade your Bluetooth and breathe new life into your audio system.
You already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B1
Bluetooth Receiver including aptX, 24-bit upsampling DAC, and extended
range.
See and hear the difference
The aluminum case of the B1 reflects traditional Audioengine design
and the high-quality components and audio fidelity are typical of
Audioengine's commitment to great sound at affordable prices. The
Audioengine B1 continues to close the gap between your computer music
and home hi-fi and even if you're not an audio enthusiast we guarantee
your music will sound better!
Type |
Bluetooth 4.0 audio with aptX codec |
Inputs |
Bluetooth |
Outputs |
Stereo analog RCA
Digital optical (SPDIF) |
Impedance |
57 Ohms |
Frequency Response |
10Hz - 20kHz (+/-0.5dB) |
SNR |
SNR (DC to 20 kHz)
>100dB |
THD+N |
(1 kHz FS 96 kS/s) |
|
Transmits both pre-amp out and LFE signals
Eliminates subwoofer cables, sending uncompressed bass signals to your subwoofer
Has an external antenna for up to 50 feet of high-quality transmission
Transmitter dimensions: 1" x 5" x 3“
Receiver dimensions: 2-3/4" x 1-3/4" x 1-3/4“
Converts any of the subwoofers
Pro440wi- Pro550wi – Pro660wi literally in seconds. | Amplification: Class-D Digital Peak: 150 W x 2 @ 4 ohms
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, AUX, RCA, USB-A for firmware updates and
phone charging, Ethernet
Outputs: Left and Right Speaker Binding posts, LFE | Driver Complement: One front-firing x 4.0” midwoofer, Four
x 1.0” aluminum dome tweeters, Two x 4.0” bass radiators
Amplification: 1 x 30W Woofer, 4 x 15W tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, Analog, Ethernet, USB-A for firmware
updates and phone charging | Features
Desktop or portable digital-to-analog convertor
Mac or PC plug-and-play, no drivers to install
High-performance headphone amp included
USB and optical inputs
USB-powered, no separate power supply needed
Stream bit-perfect HD audio with low jitter
Based on high-performance AK4396 DAC
Works With
Any computer (Mac or PC)
Headphones
Apple TV or any product with optical outputs
Powered speakers
Any audio system with mini-jack or RCA inputs
DAC type
Dual Mode USB and Optical (SPDIF)
Inputs
USB/Optical (SPDIF)
Outputs
RCA stereo/3.5mm headphone
D/A converter
AKM4396
Optical receiver
CS8416
USB controller
TI1020B
USB device class
Type 1.1 or above
Full-scale output
2.0V RMS
Output impedance
10 ohms
Power source
USB 5V
Power requirements
5V DC, 200mA
USB power filtering
2-stage redundant regulation
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) | Audioengine D2 Premium 24-bit Wireless DAC
Audioengine D2 Premium 24-bit Wireless DAC allows you to stream wireless HD audio from your computer to any music system, independent of your Wi-Fi network. D2 includes USB and optical inputs, a high-performance DAC, plus the isolation benefits of wireless. Setup is fast and simple, with no software to install and without the frustration of trying to connect to your network.
D2 Technical Specifications
DAC typeDual Mode USB and Optical (SPDIF) wireless DAC
InputsUSB/Optical (SPDIF)
OutputsRCA Stereo/Optical (SPDIF)
D/A converterPCM1792A
Optical receiverAK4117
USB controllerTI1020B
Full-scale output2.0V RMS (RCA)
Output impedance100 ohms
Power source
Sender: USB 5V or included external supply
Receiver: Included external supply
Power requirements
Sender: 270mA
Receiver: 300mA
USB power filtering3-stage redundant regulation
SNR>115db
THD+N |
Reviews
There are no reviews yet.