AZUSA BCM-6200 Condenser microphone

No longer available!
17%
All products by AZUSA

€39.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: BCM-6200 Category:
Condenser , Cardioid, for insrument use 200Ω, -45DB, SPL 130DB, 1.5VDC AA/R6

 

Read more

Condenser , Cardioid, for insrument use 200Ω, -45DB, SPL 130DB, 1.5VDC AA/R6

Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “AZUSA BCM-6200 Condenser microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

AZUSA BCM-6200 Condenser microphone removeAKG CK 33 - Cardioid Condenser Microphone removeAKG C 451B - Condenser cardioid microphone removeSENNHEISER E-865 SUPER-CARDIOID CONDENSER VOCAL MICROPHONE removeSENNHEISER ME-64 Back-electret Microphone Capsule removeSENNHEISER ME-65 Electret Microphone remove
NameAZUSA BCM-6200 Condenser microphone removeAKG CK 33 - Cardioid Condenser Microphone removeAKG C 451B - Condenser cardioid microphone removeSENNHEISER E-865 SUPER-CARDIOID CONDENSER VOCAL MICROPHONE removeSENNHEISER ME-64 Back-electret Microphone Capsule removeSENNHEISER ME-65 Electret Microphone remove
Image
SKUBCM-6200CK 33C 451BH10SE00071H10SE00010H10SE00038
Rating
Price €39.00 incl. GR VAT €164.00 incl. GR VAT €347.22 incl. GR VAT €199.00 incl. GR VAT €175.00 incl. GR VAT €119.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Condenser , Cardioid, for insrument use 200Ω, -45DB, SPL 130DB, 1.5VDC AA/R6

Technical specifications

Polar pattern

hypercardioid

Frequency range

50 to 20,000 Hz

Sensitivity

20 mV/Pa (?34 dBV)

Max. SPL

125 dB (k=1 %)

Equivalent noise level

21 dB-A

Signal/noise ratio (A-weighted)

73 dB

Impedance

600 ohms

Recommended load impedance

>2000 ohms

Supply voltage

9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)

Current consumption

Connector

Discreet Acoustics Modular standard

Finish

matte dark gray

Dimensions

13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)

Net weight

5 g (0.17 oz.)

Shipping weight

88 g (3.1 oz.)

Accessories (included)

W 30

This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip. For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone. The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments. The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original. Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout. Three-year warranty. Specification Polar pattern: cardioid Frequency range: 20?20,000 Hz Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa) Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB) Equivalent noise level: 18 dB-A to DIN 45 412 Signal/noise ratio (A-weighted): 76 dB Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz Electrical impedance: Recommended load impedance: >1.000 Ohms Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15 Current consumption: Connector: 3-pin male XLR Finish: satin nickel plated Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.) Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.) Standard accessories: W 90 windscreen, SA 40 stand adapter

The e 865 is a fully professional super-cardioid vocal microphone utilising the
very best in condenser microphone technology to achieve new standards of
quality and sound. The microphone capsule insorporates special blast/pop
protiction plate to shield the diaphragm from excessive sound pressure levels. 

Features
Rugged metal body
Extended dynamic response with pronounced presence and vocal 'punch'
Excellent feedback rejection
Very good rejection of handling noise
Very high sound pressure handling capability
Delivery Includes
1 e 865
1 microphone clip
1 pouch

Technical Data
Pick-up pattern  super cardioid 
Sensitivity in free field, no load (1kHz)  3 mV/Pa 
Max. Sound pressure level (aktiv)  150 dB 
Nominal impedance  200 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  d 47 x 193 mm 
Weight w/o cable  311 g 
Frequency response (microphone)  40.....20000 Hz 
Phantom powering  12 - 48 V 

Back-electret Microphone Capsule suitable for K6 and K6P Powering Modules. The ME 64 is a cardioid microphone capsule designed for use with the K6 and K6P powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Matte black, anodized, scratch-resistant finish.
 
Features

 Excellent directivity across whole frequency range 
 Very good feedback rejection 
 Effective rejection of incidental rear noise 
 High speech clarity 
 High maximum sound pressure level 
 Wide frequency range 
 Integrated pop filter
 
 

The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.

 

  • Pick-up pattern : super-cardioid
  • Sensitivity in free field, no load (1kHz) : 10 mV/Pa +- 2,5 dB
  • Nominal impedance : 200 Ohm (K6)
  • Min. terminating impedance : 1000 Ohm (K6)
  • Equivalent noise level : 20 dB
  • Dimensions : d 44 x 131 mm
  • Weight :
Weight0.20 kg0.30 kg0.76 kg0.35 kg0.30 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.30 kg
Weight 0.76 kg
Weight 0.35 kg
Weight 0.30 kg
Weight 0.80 kg

Related products

Recently Viewed Products