Content |
- High-power 200-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Integrated sound processor for ultimate system control and speaker protection
- Extremely powerful 10'' long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential/conical horn
- Ultra-low noise Mic/Line input with Volume control and Clip LED
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning
- - Stand mounting with 35-mm pole socket
- - Tilts on its side for use as a floor monitor
- Ergonomically shaped handle for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
| LD Systems MIX 10 A G3
Active 2-Way Loudspeaker with Integrated 7-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 10 A G3 integrates a 7-channel mixer and Class D amplification with 2 x 400 watts peak power. The compact bass reflex loudspeaker features a 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 90° x 60° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels with 2-band EQ, 48 V phantom power plus switchable hi-Z input (CH1) and stereo line channel. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering and XLR monitor and subwoofer outputs. In addition, the LD MIX 10 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A speakON output allows powering the passive LD MIX 10 G3 to easily create a stereo setup.
The rigid enclosure is constructed with tough plywood featuring a 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. On its own or in tandem with the passive unit, the LD MIX 10 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type |
PA loudspeaker |
Type |
active |
Woofer dimensions |
10 " |
Woofer size |
254 mm |
Woofer brand |
Custom-made |
Tweeter dimensions |
1 " |
Tweeter dimensions (mm) |
25.4 mm |
Tweeter brand |
Celestion |
Dispersion (H x V) |
80 x 70 ° |
Frequency response |
65 - 20.000 Hz |
Amplifier |
Class D |
Amplifier output (RMS) |
2 x 200 W |
Amplifier output (peak) |
2 x 400 W |
Max. SPL |
124 dB |
Protection circuits |
limiter, over-current, overload, short circuit, thermal overload |
Mixer
Channels |
7 |
Mic inputs |
3 |
Mic inputs |
6.3 mm jack, XLR |
Controls for Mic Inputs |
+ 20 db switchable, DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level |
Line inputs |
2 |
Line input connectors |
2 x XLR, 3.5mm TRS |
Controls Line Inputs |
level |
Hi-Z inputs |
1 |
Hi-Z input connectors |
6.3 mm jack |
Input Impedance Hi-Z Input Connectors |
1000 kOhm |
Monitor Line Outputs |
2 |
Connector Type Monitor Line Output |
XLR |
Controls for Monitor Line Output |
Monitor Volume, Sub level |
Max Output Level Line Output Monitor |
17 dBu |
Record Outputs |
1 |
Increased power main output (at 4 ohm) |
200 W |
DSP Digital Effects Unit
DSP Number of Programs |
16 |
DSP Controls |
DFX Return, footswitch, Mute switch, presets |
DSP Display Elements |
Peak LED |
Main Section
Main section controls |
Balance, EQ Hi, EQ Low, EQ Mid, Master Volume, mono/stereo, Phantom Power, Power On/Off, switch operating voltage |
Main section indicators |
4-segment Level Meter, power LED |
Phantom power |
48 V |
Mains connector |
IEC socket |
Operating voltage |
SMPS |
Operating voltage |
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, automatic switching |
Power consumption |
500 W |
Cabinet
Cabinet construction |
Bass Reflex |
Cabinet material |
16 mm Plywood |
Cabinet surface |
texture paint |
Cabinet colour |
Black |
Width |
315 mm |
Height |
489 mm |
Depth |
307 mm |
Weight |
12,3 kg |
Other features |
Bluetooth, dual-tilt flange (0°/5°), Ergonomic handle |
|
10’’ bi-active two way plastic speaker
- Woofer 10’’ VC 1,5”
- Driver 1’’ VC 1”
- Line output XLR OUT + ¼” JACK OUT
- Line input XLR IN + 2 x RCA
- Mic input XLR IN + ¼” JACK IN
- Rms power AB class 120 + 30 W
- Peak power 300W
- Frequency response 55hz-20khz
- Peak spl 125 dB
- Power supply AC110V/AC230V
|
The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB amplifier drives 50W (RMS) to the high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.
The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a two-band EQ to further enhance the sound. The H-PP molded enclosure features a steel grille and a dual position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4" input, two RCA inputs, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10 Achromic Series loudspeaker ships with a power cord.
- Amp Power: 1000W dynamic
- LF: Class-D 250W (RMS)
- HF: Class-AB 50W (RMS)
- Built-in digital signal processing (DSP) with LCD screen, EQ, and Presets
- Preset 1: Normal
- Preset 2: Live
- Preset 3: Club
- Preset 4: Speech
- Frequency Range: 70 Hz to 20 kHz
- Dispersion (H x V): 90 x 60°
- Output (Peak SPL at 1m): 121 dB
- Drivers: 10" woofer with 2" voice coil + 1" HF compression driver
- Inputs: Balanced combo XLR-1/4" and two RCA
- Output: Balanced XLR
- Enclosure: H-PP molded
- Grille: 1.2mm steel
- Handle: 1 x top
- Fly Points: 2 on top, 1 on back
- Pole Mounting: Dual position 0 or 7.5°
Type |
10.0" / 254.0 mm, 2-way active loudspeaker |
Frequency Range |
70 Hz to 20 kHz (-10 dB) |
SPL Level |
Peak: 121 dB |
Amplifier Power |
1000 W Dynamic, 250 W Class-D (LF) + 50 W Class-AB (HF) RMS |
DSP |
DSP Features: LCD screen with EQ and multiple presets |
Drivers |
10.0" / 254.0 mm woofer with 2.0" / 50.8 mm voice coil 1.0" / 25.4 mm HF compression driver |
Input and Output Connectors |
Input: Balanced female combo XLR-1/4" / 6.35 mm jack Input: 2 x RCA (phono) Output: Balanced male XLR |
Enclosure |
H-PP molded |
Grille Material |
0.05" / 1.20 mm steel |
Handles |
1 x top |
Flypoints |
2 top, 1 back |
Pole Mount |
Dual Position: 0 and 7.5° |
Power Input |
115 VAC, 60 Hz |
Power Consumption |
400 W |
Dimensions (H x W x D) |
20.9 x 12.2 x 11.8" / 530.9 x 309.9 x 299.7 mm |
Weight |
25.0 lb / 11.3 kg |
|
- 2-way powered loudspeaker with a 2” HF and a 10\" LF
- Maximum 137dB SPL and 44Hz-20kHz frequency range is ideal for today’s audio engineering demands
- High power 2000W Class-D amplifier module
- 96kHz DSP and FIR filter for true high-resolution sound with super low latency
- Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
- Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
- D-Contour and highly reliable protection circuits
- Floor monitoring setting
- Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
- Optional speaker cover (SPCVR-DZR10)
- Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
|
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 10-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 134 dB peak SPL
Frequency Range | 65 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. | Maximum SPL | 134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output. | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A Current rating is 1/8 power. | Power Rating | 2000 W | Frequency Response | 85 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. | Coverage (Nominal -6 dB) H | 90 ° | Coverage (Nominal -6 dB) V | 60 ° | LF Transducer | SMX2100 254 mm (10 in) | HF Transducer | DH3-B 1.25-in titanium compression driver | Crossover Frequency | 1700 Hz | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 526 mm (20.71“) | Width | 330 mm (12.99“) | Depth | 365 mm (14.37“) | Weight Net | 20.3 kg (44.75 lbs) | Shipping Weight | 22.9 kg (50.49 lbs) |
|
Reviews
There are no reviews yet.