BEHRINGER B 906 – dynamic microphone for instrument and vocal

51.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Professional dynamic microphone for instrument and vocal applications Frequency response designed for guitar amplifiers, percussions and brass instruments Super-cardioid polar pattern minimizes background noise and feedback Switchable low-cut, flat and high-frequency boost to match instruments Extremely high signal output which lets the sound cut through Flat-shaped microphone body, perfectly suited for guitar amp combos and […]

 

Read more

  • Professional dynamic microphone for instrument and vocal applications
  • Frequency response designed for guitar amplifiers, percussions and brass instruments
  • Super-cardioid polar pattern minimizes background noise and feedback
  • Switchable low-cut, flat and high-frequency boost to match instruments
  • Extremely high signal output which lets the sound cut through
  • Flat-shaped microphone body, perfectly suited for guitar amp combos and cabinets
  • Microphone stand adapter and impact-resistant carrying case included
  • Rugged, reliable die-cast body construction
  • 3-Year Warranty Program*
  • Designed and engineered in Germany
  • Frequency Response: 50 Hz to 18 kHz
  • Impedance: 600 Ohms
  • Sensitivity: -54 dBV/Pa at 1Khz
  • Connector: XLR 3 Pin Male
  • Color: Black
  • Mic Clip Included: Yes
  • Hard Case included: Yes
  • Microphone Weight: 140g / 494 oz
Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER B 906 – dynamic microphone for instrument and vocal”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER B 906 - dynamic microphone for instrument and vocal removeSHURE Beta98HC - clip on condenser instrument mic removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE removeNPG CB-410 Instrument Microphone 48V removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz remove
NameBEHRINGER B 906 - dynamic microphone for instrument and vocal removeSHURE Beta98HC - clip on condenser instrument mic removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeSENNHEISER E-904 CARDIOID DYNAMIC INSTRUMENT MICROPHONE removeNPG CB-410 Instrument Microphone 48V removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz remove
Image
SKUE015447BETA98H/CKSM141SLH10SE00103CB-410BETA 52A
Rating
Price 51.00 incl. GR VAT 241.91 incl. GR VAT 515.99 incl. GR VAT 179.00 incl. GR VAT 47.11 incl. GR VAT 231.36 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

In stock

Only 1 left in stock (can be backordered)

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Professional dynamic microphone for instrument and vocal applications
  • Frequency response designed for guitar amplifiers, percussions and brass instruments
  • Super-cardioid polar pattern minimizes background noise and feedback
  • Switchable low-cut, flat and high-frequency boost to match instruments
  • Extremely high signal output which lets the sound cut through
  • Flat-shaped microphone body, perfectly suited for guitar amp combos and cabinets
  • Microphone stand adapter and impact-resistant carrying case included
  • Rugged, reliable die-cast body construction
  • 3-Year Warranty Program*
  • Designed and engineered in Germany
  • Frequency Response: 50 Hz to 18 kHz
  • Impedance: 600 Ohms
  • Sensitivity: -54 dBV/Pa at 1Khz
  • Connector: XLR 3 Pin Male
  • Color: Black
  • Mic Clip Included: Yes
  • Hard Case included: Yes
  • Microphone Weight: 140g / 494 oz

A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.

Other features include:

  • Mew A98D flexible drum mount
  • SPL handling to 160dB
  • frequency response of 20 to 20,000Hz and included preamplifier
  • shock mount and windscreen
The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments. Features
  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application. Suggested Applications Acoustic Guitar Acoustic Bass Cymbals Brass/Woodwinds Orchestra Ensemble Vocals Piano Strings Room Ambience Live Recording
  • Especially for tom and snare recording
  • Polar pattern: cardioid
  • Frequency range: 40 - 18,000 Hz
  • Impedance: 350 Ω
  • Robust metal chassis
  • Incl. special tom holder
  • Bag included
  • Dimensions: 63 x 41 mm
  • Weight: 125 g

Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string  musical instruments
Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum. The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring. Features
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Type Dynamic (moving coil)
Frequency Response 20 to 10,000 Hz
Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Output Level Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL
Weight0.20 kg0.20 kg0.50 kg0.30 kg1.00 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.20 kg
Weight 0.50 kg
Weight 0.30 kg
Weight 1.00 kg
Weight 0.80 kg